We made the crank position of the truck's muscular flywheel driveable with a strong joint
ฝัง
- เผยแพร่เมื่อ 31 มี.ค. 2024
- We made the crank position of the truck's muscular flywheel driveable with a strong joint
#made #crank #position #truck #muscular #flywheel #strong - ยานยนต์และพาหนะ
Not sure what is scarier. The fact is hat he fixed the flywheel like this, or the fact that it looks like he did it before
The stress cracks are from extreme heat 🔥
Thats why the center exploded out ,
It is permanently ruined .
Nothing can be done to fix it !
It will explode with even greater Force next time !
Its a Time Bomb with an extremely short fuze
What's going to happen when the part explodes after some miles?
In worst case, it will kill the driver and a few passers-by on the road.
It's Pakistan, where life is cheap and short.
so true; imagine the heat that the slipping clutch that failed looked like?
They polished a turd and did a fine job ! Don't want to be around that when it lets loose again .
these videos are just money grab videos there just trying to make a buck
@@chrisjarvis4449
Can't be true.
Intention of all these world-famous "super high skilled professionals" is not making money with crap videos.
These world-famous specialists are proud of their work just using a sledgehammer while crawling in the dirt.
They have remained small children who have very little understanding of decadent Western technology.
Even the innards of these new gasoline donkeys will overwhelm most of them.
Yes, it's sad but true:
Most of these workers don't survive a full year, or if they do, with chopped off hands and feet and a fatal lung disease.
Life in Pakistan is short and cheap.
I'm impressed you repaired what you did with the parts you have, unfortunately strengthening the weakest part now ensures the net time that massively cracked flywheel fails it will do so spectacularly with shards of steel flying in every direction at high rpm likely taking out the driver and any close pedestrians. (Slow clap)
The flywheel is knackered and ready to go bang
А где сварка? 🤣
Читай название внимательней "Если закончились электроды."😁
С такими трещинами ему давно пора в переплавку. Это какие ж нагрузки испытывает коленвал, чтобы маховик так разорвать?
Там скорее всего всё разорвало... Маховик вырвало, трещины жесть, нагрузка была бешаная. Посадили на резьбу кусок пластилина и двумя болтиками на 6 зафиксировали😂
Да не, маховик уже восстановленный был, второй раз делают кажется
@@servis-Ural Если не в десятый 🤣
Set-screws to hold that piece in? No way.
At least run a V groove between new metal piece and old metal flywheel, then weld it, then cut/shave it flush on the lathe. Would have taken the same amount of time and is stronger.
Some one is going to wear that flywheel .
A lot of work just for a coaster for flower pots.
there is three ways to do a job ..... the right way , the wrong way, and the way we are going to do it. rock on
Не , ну не выбрасывать же ! 🤣🤣🤣 . Скорее всего эта комедия снимается только для контента , ежу понятно что работать не будет .
У меня тоже закралось такое подозрение после склеивания осей и коленвалов.
все будет работать , и достаточно долго !
Gee, Um..... I don't know what to say. Wouldn't you run a weld around the joint ?. Or just buy a good used flywheel !.
it's cast iron, won't take a weld. i would have peened off those two bolts with a hammer to swell them and prevent from shaking loose, then ground them down. i think it will hold but it would have been safer to make an entire flywheel from mild steel on the lathe and transfer over the starter ring. he had all the tools there to do it, and the work would have been about the same.
You can weld cast iron with a nickel 55 or nickel 99 rod or wire. You can also use 316 stainless rods or wire and it will not harden like if welded with mild steel. But none of that matters when the flywheel is scrap to begin with. Also what a sweet piece of locally smelted chunk-o-scrap to make the plug out of.
@martinswiney2192 the weld itself won't be hard but the haz zone will be unless you pre heat the cast iron to 700°
@@martin-vv9lf It's not cast iron, it's cast steel which has different properties all together.
Excelente, Super profissional!
Маховик протачивается от привалочной базы которая прилегает к коленвалу а тут не факт что геометрия будет
Merhaba çok güzel bir video olmuş 👍
Пару раз видал как на ходу разваливаются тормозные диски. И это было очень опасно. Что случиться если развалится махових даже думать больно.
Esa reparacin puede funcionar para pequeñas poleas de fajas en motores eléctricos,
Para una volante que absorve y entrega energia cinética producto de las millones de explosiones de los cilindros del motor, se arloja y se sale el postizo.
Gran trabajo,felicidades y que tengas buen dia...🐧
Man, people in Pakistan have high pitched voices.
That lathe tool looked worse than the fly wheel.
Так при включении задней двигатель то в другую сторону начнет работать и все открутится ... Ребята нужна сварка....только сварка...прям к колену варить и шатунам😂
Это с каких пор?
Das Schwungrad ist kaputt. Was treibt ihr da 😅😂?
Nice sharing Vidio...Very useful and useful Always successful friends .Greeting from Indonesian traditional gold prospecting 🇮🇩💓👍👍
Thanks
Этот маховик на мусорку опоздал..
Мастер красавчик 👍
Маховик весь в трещинах, он перегрет 20 раз, стоит ли так делать? Это если доехать до базы, МАКСИМУМ.
Нет такой детали в автомобиле чтобы они не восстановили.молодцы.удачи.
flywheel full of cracks and fissures pour some epoxy n grind off😀
Ek bi full nei he Kaya hua,?
Меня одного смутили трещины по привалочной плоскости диска сцепления? Хотя работать будет, но как долго? Или опять - сварка-балгарка- станок! 💪🤷🏻♂️😆😆😆
Uma dúvida isso tá só enroscado?.se sim vai sair🤦♂️😅
Sometimes you just gotta turn loose of a few bucks and buy a (GASP!) new part. Ockmed is gonna need some new legs when that piece of scrap metal lets loose and comes through the floor of the truck.
This man is one of the best machinists I have ever seen with a great vision of how to repair things and the tools he creates to do the repairs as with the grinder attachment to surface the flywheel. That flywheel has multiple cracks, and its life is limited, but they have to make do with what they have!!!
We found the guy that have no clue what he's talking about.
This guy is an idiot.
He probably will kill his customer when he uses this "repaired" flywheel.
Ở Việt Nam tôi thợ giỏi như này có nhiều lắm.
So Amazing!!!
Thanks
I really enjoyed seeing the work he did. But I would buy a different fly wheel that didn't have all those cracks in it. I would be very worried that that fly wheel would eventually fly apart. Sometimes the part is too far gone to repair and still be safe to use.
Great video though.
'Not sure about the cracks being an issue; just like brake disks, they develop surface cracks due to friction heating. I suspect they are more of an appearance issue than a structural one. All things being equal a scatter-shield would still be nice...
It's now a bomb waiting to go off. All those heat stress cracks will eventually fail, and I doubt the bell housing will be of much protection.
Good enough for where they live
There is no way those 2 bolts will stop that centre unscrewing, threading it in was a terrible idea, the entire torque and weight of the truck in drive and overrun will eat it alive, I imagine those 2 bolts are the lowest grade a bolt can be, if it had 6 x 12.9 grade it would be a start but it'll still fail. Lets hope it's just temporary so it can slowly creep to the flywheel shop a few miles away.
They are not capitalism. It's easy to replace it, but making an old material last a hundred thousand miles feels amazing. That's his honest job. If it doesn't work, he probably won't repair it.
At least cross drill and pin it … imagine that thing sawing through the bell housing
So this is how they make a bouncing betty mine
I wouldn't use that flywheel, too many cracks
How to make a frag grenade the hard way :D
Formidables les gars
Так я не понял , а как-же сварка , нужно было заварить 😮
В соседний сарай почему то не завезли электродную проволоку!😁
Золотые руки мастеров!Молодцы!Здоровья и благополучия Вам!
Хотя бы на фиксатор резьбы приклеил бы.
там два болтик на 6. Это крепче ))))
Aufgepasst! Der neue Look von unseren LOCTITE Schraubensicherungen!
th-cam.com/video/vzmmSAxZpuw/w-d-xo.html
Watch out! The new look from our Loctite screw fuses! & Press seats
Ребята конечно молодцы, но работать это не будет, и даже очень опасно.
Wonder if Boeing subbed out to these guys
Soon to be landing in a back yard near you. Lol.
I worked at Boeing. Looks like part of the team.
Respekt Meister ❤❤
Thanks
мастера? халтура!!!
hmm
Our friend is a man of many talents as soon as l saw the problem I knew instinctively how he was going to respond and I was 💯% spot on at the end of the day this is one guy that can make your day better if you are the client
После этого ремонта я могу смело сказать што уже видел всё интересно только одно куда полетит водитель когда это говно оторвется
Cool work thanks 👍
Thanks
Brilliant, but is the old part worth the hassle repairing
Бесполезная работа . Такую деталь опасно устанавливать
👍👍👍👍👍
Thanks
а он развалиться, к бабке не ходи
Нихуя и них гонка была🤣
🏁🏁👍❤️🇩🇰
Точность офигенная!😅
Dirty job
wahhhhhhhhhhhhhhhhhhhhhhhhhh
Занятся нечем.ремонт маховика с трещинами.
Wow beatiful vary good 👍🏻💯💯
Another useless repair with the worst possible way of repairing that part. But at least you are making money on TH-cam.
Gratis work to fix the mounting problem but he overlooked the heat crack on the Facebook
piece of junk.time wasted on that job.
А потом на хаду как он разлетится и пизда индусу он лопнул в месте прилигания диска и шлифовать кго не льзя
а шо такое ? чугун ? уже не паяется ?
Электороды после дождя отсырили.
Jejak Allah.qar.