Came here for pool ideas left here with some life knowledge and wisdom. Thanks man. I needed to hear that and I dont think stumbling upon your page was an accident. Thank you!
hey brother!...thanks for writing in!...that's great to hear, its great to connect with people in this way!...best of luck with your pool project and kick butt in life too! stay real
Wow watching this was like being at work. In fact I was tiling today. Been building, tiling, repairing gunite pools for twenty three years now. It's definitely hard, dirty, dangerous work but it's what we do. Great vid man. I enjoyed watching.
right on brother thank you for writing in and for the great comment...these videos are lots of fun to make and it is a great way to connect with people...good luck with your pool project and let us know if you need any help!
@@HowToDoitright we like rapid set products as well as spec mix with Mason's glue for our repairs You can also use plastic cement with number 30 silica is also commonly used for repairs and to create a bed for tile setting And pro lite non-SAG thinset for the back of our tiles and for tile setting ☝️☝️☝️ All of this can be found at your local home Depot or Lowe's Hope this helps 🙏🙏🙏🙏
Thank you Mike! Giving credit to those dudes is righteous! Make more videos on setting coping and prepping mortar bed... Keep that wizardry coming, I'm listening and watching!
thanks for the great comment brother...I'm working on another pool remodel video...Ill try to incorporate the coping installation breakdown and motor bed prep in there also...that's a great video idea that we haven't done yet!! Stay Real!
th-cam.com/video/L-8N8Dv7Hh0/w-d-xo.html whats up brother!...here is the video that you requested, I gave you a shout out at the intro so I hope that you are cool with that check out the vid and I hope that it helps you out in some way!...lmk if you have any questions
Thank you for this video! I have a 30 year old pool and a bucket of tiles that fell out. I’m going to try and fix them. So I need to apply thin set then add grout? What kind of grout?
Sure you can do that So your pieces don't move around on you We like "prolite non sag" thinset also available from home Depot I think you'll enjoy making tile repairs It's always peaceful to be poolside working
I'm not familiar with that specific product I always recommend to people to do what is most common for your region and climate We are based in Los Angeles California and the methods you see here in this video or for a concrete structure pool We like rapid set products and quickrete brand for a lot of stuff
Is thin set required to be added on both wall and back of tile? Or is just the wall enough?? I noticed your guy didn’t add thin set to the back of the tile
All I needed was your maestro. Him and my husband could of remodeled our pool lol. I guess you can come and inspire them as they work LMAO. But seriously awesome video. Although, if I were the customer I would of replaced that ugly old coping :)
Thanks, loved the video. I also have a large crack in my bond beam. I plan to fill it with laticrete 3701 fortified mortar bed - any thoughts on the product for filling the crack? What mortar bed product did you use?
im not familiar with the product that you mentioned however we are really looking for some that cures fast and sets up at least 5500 psi we like spec mix rapid set products plastic cement / #30 sand if you are fixing large chunks that are missing you can you sack concrete w/form boards with an ad mix for bond ...masons glue i think
1x1 tile can sometimes be problematic around the swimming pool water line because it's so small little pieces will fall off into the water over time I like to use one by two as my smallest water line tile Yes a 6-in water line is normal or standard for swimming pool construction you can do other things but a 6-in water line is traditional I tell clients that 1x2 tiles is the smallest we go Good luck 💪
Hi there , i need to replace the tile above the plaster and the coping , can it be done without doing the plaster ? my plaster is still good . thank you
Hello Thank you for writing in and for your question Yes you can get yourself an angle grinder with either a four and a half or a 6-in wheel depending on the size of the angle grinder and you can get inside of your pool on a set of scaffolds and you can cut yourself a line underneath your tile at the plaster line with your diamond blade This now gives you a 6 in path where you can demo out your tile and create a new title line and then the bottom diamond blade cut would be filled with grout
Hey man I have a concrete deck and pool. I’m replacing my waterline tiles. There is a plastic “retaining ring” (not sure what it’s called) that the top of the tiles go behind. Do I need to keep that with the new tiles or can I remove it and grout the top of the tiles right to the bottom of the concrete deck? I don’t know what it’s for besides maybe holding the top of the tiles in place, but I don’t know if it’s necessary either. Thanks for the knowledge bro and videos I’m learning tons!
this sounds like the expansion joint at the top of the tile line done with plastic you can and should re do this with mastic//silicone joint not grout if you use a hard mason product like grout there is no room for expansion like the plastic joint or silicone joint and tile will fall off this sounds like east coast vinyl pool check with local codes and what is common for your area
Thank you so much for the reply man, you’re awesome! I’m in El Paso Texas and the pool was built with the house back in the late 90’s. Outdated codes maybe? I’ll look. Thanks again!
Hey man is there a specific “mastic joint compound” that you would recommend? Most of the compounds I’m finding is for the top of the deck, not where the bottom of the deck meet the top of the tiles. Thanks so much for your help!
You should be able to get away with tubes of silicone from home Depot or your local building supply these would be the same types of tube silicone that would go in a caulking gun this is for the top of the tile under the deck
You can apply this and wipe away the excess with a folded paper towel your finger or a folded piece of cardboard to leave The joint nice and clean and remove the excess silicon
The decking around the pool was removed and not replaced as part of the work The concrete decking around the pool pressing against the pool coping is almost always the cause of the stress that causes the crack in the bond beam So removing the deck and not putting it back with concrete and putting grass in its place alleviates this pressure But otherwise yes The best way to address these types of cracks that go left and right in the bond beam is to remove the coping pieces completely in any of the damaged areas build the bond beam back up and replace the coping Thank you for writing in and for your comments 👍
@@UltimatePoolGuy thanks for your reply. It happened to my pool and it’s only 3 years old! I can’t find anyone to fix it. I live in St George, Utah. You don’t travel do you?
It's a 5 1/2 hour drive so it's not terrible I would have to ask you to cover some travel costs and any boarding So we might be able to work something out if you want to send me a more detailed description of what's going on with some photos to my email I'm happy to take a look ultimatepoolguy@gmail.com Thanks 🙏
So im working on my pool took coping and tile out now to build back broken plaster you use typs s mortar? and does it need waterproofed or does the tile and thinset overtop keep it from seeping through?
I do not recall us ever waterproofing the mortar bed ...usually we repair the base with spec mix or rapid set product lay the thin set and tile then grout hope this helps lmk if you have more questions
Thank you for the suggestion A lot of what we use could be sourced from Home Depot or Lowe's They are general building products but we use premium versions of what's available Hope this is helpful
Hey brother, do you normally apply a waterproofing membrane (like Redguard or 9235 waterproofing) before you apply the thinset for the pool tile? If not, why? and if you do, when do you need to apply that? Thank you very much (I am in Florida otherwise I would hire you for sure)
Water transmission membrane no we do not however not could be a regional thing we will do demolition one pass for repairs and 1 pass for installation of and the 1 pass for grout
@@UltimatePoolGuy I was asking because there are some mortar thinset for glass tile that already have the impermeability (like Ardex X77) and that if that would be sufficient. Thank you for the reply!
yes sir stuff with the admix already in it is good to go should need nothing else after that you can always add some masons glue to your mix just to be sure this sounds good
Thanks for demo. I have big cracks behind the some tiles. You mentioned, you use "high bond cement"to fill the cracks. Where and what brand I can get from?
Usually any rapid set product would work that would be their repair mortar or cement all products Quikrete also has a hydraulic cement that we will use in and around the pool area that is also effective You can find any rapid set products at your local Home Depot or hardware store
@@UltimatePoolGuy When you use Cement All to fill cracks in the bond beam, how long do you have to wait before you can put thinset and tile over it? Are you able to set the tile that same day? Or do you have to keep it moist and let it cure for a few hours (or overnight) before you apply the thinset?
@@jbh123stl rapid set products - that include cement all can be used shortly after application...there are usually some set times and suggestions on the bag of material
I would love to k ow how to install waterline tile in the deep end where I cannot stand to reach it. I used a ladder it slid out from under me ride it down scraping knees hands elbows there has to be a way to
Dear ultimate Pool Guy thank you for your videos they are excellent. Will you please help me understand these questions: your bender board is about a half inch above the bond beam. And level. Do you then pour your mortar mix up to the edge of your level bender-board, let that dry and Then set your coping with thin set.?
Yes And the half inch rise you're talking about ends up being the depth of the mortar bed for the coping so the taller your Bender board is there the deeper your mortar bed will be
right on brother thats what its all about this will be same as bathroom or kitchen but outside 1 pass demo 1 pass repairs and level base (spec mix/rapid set) 1 pass install
Hello Thank you for writing in It is possible and I believe you can see in the video we are using a 2 ft and 4 foot Bubble Level to establish level and follow level around the pool as we work We will typically save finding level with a water level for when we are working completely blind like establishing Plumb level for coping installation or setting the guide wires for shotcrete Hope this helps
@@joerondeau9814 ok great thank you for taking a look at some of our work...there are lots of other great videos on the channel that you may enjoy stay real out there!
Maybe one day you can do a vid about the variations and differences between concrete mixes. Like what type to use for tile, coping , Gunite and plaster. Either way there’s no better channel out there than yours Vato.
That's a good idea thank you for writing in and suggesting that When you go to home Depot or the building supply yard it's easy to get confused but basically there's mortar products then set products and concrete products Rapid set Make some products that we like to use and we use often such as rapid set Mason mix brown bag and rapid set cement all Quikrete also makes products that we like to use such as their hydraulic cement As far as concrete mixes anything will do in your 90 lb bag varieties And for plaster is always white sand and white cement and then you make your variations from there Hope this is helpful 💪
Spec mix type s And rapid set motor mix In general rapid set products we like to use around pools They have a few different kinds of products available from home Depot and Lowe's type suppliers For your spec mix you can also add Mason's glue for better bonding strengths Hope this helps
right on brother that is a good one that i will keep in mind...thank you for writing in in short lean to scaffolds have been around since the beginning of pool work but are not legal and not osha approved so these are made by each technician and welded together usually a set (2) of shorts and longs to set up around the pool with wooden planks
I’m looking to do a build by owner pool and want to do the tile. I’ve done floor tile but never on pools. Do you use any special adhesive or grout ? Thanks
hello thank you for writing in...yes that is a great comparison pool tile to floor tile... 1.strip old material 2.clean and repair base...want smooth and chunck-age free...repair with rapid set products and make level 3.set 6in. water line tiles 3x3, 2x2, 6x6, etc...with non-sag thin set - we like pro lite products...set each piece nice and level all the way around 4.clean joints and grout with sanded grout
pro lite thin set www.doitbest.com/products/261276?gdffi=46857429cc1343fcae2c0324cc87e14a&gdfms=9FD80D7B92CF4CEFBAEAA0DC9F93168F&gclid=Cj0KCQjwho7rBRDxARIsAJ5nhFraOu9JF5kQaLGXIpfcOR0Y3Mtyo29rq2eaQ1kJ4ZtaQUAiQ9wFJckaArGhEALw_wcB
Video Timeline: 0:00 Theme Animation 0:10 Overview of the damage to pool wall and coping/ initial steps 1:15 Setting the skimmer and tiling the skimmer opening 3:04 Grinding out crack in pool wall and filling with concrete 4:10 Repairing broken corner of pool coping with thin-set and mortar 5:25 Tiling over radius with thin-set 6:05 Sawing tile to size 6:40 Setting tile on vertical pool wall and flat mortar bed 7:20 Example of skill: Alfredo 'Fast Hand' De Fabricante De Piscinas 7:35 Your responsibility for living your life, in general
Hi there , i need to replace my pool 120vo to 12v lcd lights , can any electrician do that or it have to be an electrician with pool experience? THANK YOU.
A lot of residential electricians do not like to work on swimming pool equipment however you can call around and usually any licensed electrician can handle this type of work
@@UltimatePoolGuy thanks so much for replying. I tried doing it with Portland cement recommended by a pool place and it didn't last long. Would you recommend anything to fix gunite in my pool? Problem was I let ice build on the tiles and couple popped off but Also some chunks of gunite underneath them. Would like to patch them to make it look a bit better. Would be nice to have some type of gunite spray cans lol
You can use rapid set products also available from home Depot for your areas that need small patching or repairs Rapid set mortar Rapid set cement all Are both good
@@UltimatePoolGuy I will do that.... any use in me trying to match colors or is that a loosing battle ? I noticed all cement gets washed out to light gray pretty quickly
Hello, I have a 36 yr. old vinyl liner pool 18' round with bullnose coping and was just informed by my contractor that it would be best to fill the pool with dirt and close it out because the coping is shot. He indicated that the cost to repair wouldn't be a good return on investment. Would this be your recommendation? Can I buy the coping and do it myself? Thank you!
a vinyl liner pool that is 36 years old is a very old pool vinyl liner pools are not constructed like a concrete structure pool sad looking or completely broken coping is not a reason to not use a pool or to close it completely a pool that has structural cracking and leaks uncontrollably is a reason to shut a pool down completely a pool closure is also dependent on the region that you live and there may be other factors at play here that we are not aware of you can always circle back around to the contractor that suggested a complete closure and ask for the merits behind that we see pools all the time in various states of disrepair that are able to maintain healthy water/water quality conditions and the pool is still being used
if you are trying to sell this property with a broken pool and do not want to or can not do the repairs you can always sell the property with the pool broken
This set Or spec mix Should work out fine you can also look at rapid set products those are also very effective and should be available at your local hardware store Such as rapid set mortar mix
That crack is not in the bond beam. That crack is the mortar bed that adheres the coping to the bond beam. You should always replace those coping and mortar bed before installing new tile. This is BAD information. 30 years renovating pools on the east coast.
Love the video Mike. A video on grouting the inside of the skimmer may help us out here. I find so many freshly built pools where leak detection finds a leak in the skimmer throat. And include a grout vs. epoxy repair breakdown in said throat. I hate that so many brand new pools get epoxy patch jobs but wonder if it even matters. God bless brother.
In Los Angeles we prefer grout or rapid set products in the skimmer mouth over epoxy Thank you for the video recommendation This is a common issue and a common area where their problems often times the skimmer mouth is plastic mating to the back of the pool which is cement
Is it a requirement on TH-cam to play excessively loud crappy metal music in the background ? Turn good informative videos into unwatchable 80s heavy metal concert
This is a concerned kind of a job first of all you need to provide safety PPE (Personal protective equipment ) for your workers man, no goggles while grinding what happens if he damages his eyes, Oh Workers Comp ok if no WC the PO (property owner) gets the responsibility Big Time I am not trying to discourage your work just a reminder to be safe at work.
semantics brother... get busy working and grinding and less time nit picking like a stay at home mother, stay productive and roll with the punches you also forgot pig snot?...where does that apply? thanks for checking us out and writing in...ill give you a shout out on our next release stay real!
the equipment I select for each project represents the best performance choices for that particular pool configuration...I try to leave the client and pool with the best set-up possible and set them up for long-term success!...my ego isn't really attached to any singular product or brand, although I do have my preferences hope that helps
Two things ... 1st. Is it an specific thin set or you can use any type??? 2nd freaking Alfredo is having a pool party he just need a 12 pack of Modelo .... Jajaja
Been doing pool tile for 15 years and I can assure you that pool hack job will leak. Looks like someone made a video without knowledge of the pool industry in and out…..
@2StrokeMichael I always heard pool tile needs waterproof behind it to avoid efloressance. Is that just not being done here or is it already part of the bond beam?
UltimatePoolGuy - you need Morgan Freeman to do the narration 😁 Good video though. The pool company put the wrong coping on my pool, had it replaced with large 3-4’ shaped blue stone, but the pool company were jackasses and just filled in behind the tiles where they removed the coping and put sand in and now the whole beam is gone. So I’m cleaning out all of the sand and removing the tiles without damaging the plaster under it and will have to rebuild the whole beam. Then install all new tiles. Just been reading up and watching videos on acid spraying to prep the old concrete and then make the bonding coating and now just trying to see if I should be using mortar or Portland-mortar to rebuild the new beam. Your video was very helpful, that’s a huge project and your team is doing nice work 👍
Came here for pool ideas left here with some life knowledge and wisdom. Thanks man. I needed to hear that and I dont think stumbling upon your page was an accident. Thank you!
hey brother!...thanks for writing in!...that's great to hear, its great to connect with people in this way!...best of luck with your pool project and kick butt in life too!
stay real
Wow watching this was like being at work. In fact I was tiling today. Been building, tiling, repairing gunite pools for twenty three years now. It's definitely hard, dirty, dangerous work but it's what we do. Great vid man. I enjoyed watching.
Thank you for writing in
Stay real 💯
Love you man. Wife walked in at min 7:35 and was like “what are you listening to” I replied “mike the pool guy” lol
right on brother thank you for writing in and for the great comment...these videos are lots of fun to make and it is a great way to connect with people...good luck with your pool project and let us know if you need any help!
What type of cement did you use to fill the gaps in that hole? Is it a special brand for pool?
@@HowToDoitright we like rapid set products as well as spec mix with Mason's glue for our repairs
You can also use plastic cement with number 30 silica is also commonly used for repairs and to create a bed for tile setting
And pro lite non-SAG thinset for the back of our tiles and for tile setting
☝️☝️☝️ All of this can be found at your local home Depot or Lowe's
Hope this helps 🙏🙏🙏🙏
Thank you Mike! Giving credit to those dudes is righteous! Make more videos on setting coping and prepping mortar bed... Keep that wizardry coming, I'm listening and watching!
thanks for the great comment brother...I'm working on another pool remodel video...Ill try to incorporate the coping installation breakdown and motor bed prep in there also...that's a great video idea that we haven't done yet!!
Stay Real!
th-cam.com/video/L-8N8Dv7Hh0/w-d-xo.html
whats up brother!...here is the video that you requested, I gave you a shout out at the intro so I hope that you are cool with that
check out the vid and I hope that it helps you out in some way!...lmk if you have any questions
I love the way you respond to all the negitive comments unphased!!! People need to be more like you when dealing with negitive comments.
I been doing this 9 years brother
thanks for checking in
Thank you for this video! I have a 30 year old pool and a bucket of tiles that fell out. I’m going to try and fix them. So I need to apply thin set then add grout? What kind of grout?
Any color
Sanded grout ""
From home Depot or Lowe's is fine
Good luck 🍀
@@UltimatePoolGuy thank you!
Should I wait 24 hrs for thinset to cure before grout?
Sure you can do that
So your pieces don't move around on you
We like "prolite non sag" thinset also available from home Depot
I think you'll enjoy making tile repairs
It's always peaceful to be poolside working
@@UltimatePoolGuy you’re the best! Thanks for the tips and motivation :)
🫱🫲
No problem
Good luck!
Any feedback on flex seal to fill crack leaving enough space for hyd.c then hydraulic cement over flex for the face of wall?
I'm not familiar with that specific product
I always recommend to people to do what is most common for your region and climate
We are based in Los Angeles California and the methods you see here in this video or for a concrete structure pool
We like rapid set products and quickrete brand for a lot of stuff
Is it okay to use rectified tile on a spa spillway or on the pool waterline?
@@MarkBirmes you should be able to install any material that is safe to be used around a swimming pool and that suits your taste
Is thin set required to be added on both wall and back of tile? Or is just the wall enough?? I noticed your guy didn’t add thin set to the back of the tile
@@leonardosanchez3732 on just the wall is good enough
You can use a rubber mallet to set each piece 🙌
@@UltimatePoolGuy doing my first tile job, using 6x6 tile so I’m a little nervous. Ima just eyeball the level. And use a small level along the way 😂
@@leonardosanchez3732 2 & 4 foot levels and you are good 💯
for anyone wondering, the song is:
Vindicated - Ethan Meixsell
For anyone wondering the song sucks. Shoulda let the Mexican music play.
All I needed was your maestro. Him and my husband could of remodeled our pool lol. I guess you can come and inspire them as they work LMAO. But seriously awesome video. Although, if I were the customer I would of replaced that ugly old coping :)
sounds good thank you for writing in
Thanks, loved the video. I also have a large crack in my bond beam. I plan to fill it with laticrete 3701 fortified mortar bed - any thoughts on the product for filling the crack? What mortar bed product did you use?
im not familiar with the product that you mentioned however we are really looking for some that cures fast and sets up at least 5500 psi
we like
spec mix
rapid set products
plastic cement / #30 sand
if you are fixing large chunks that are missing you can you sack concrete w/form boards with an ad mix for bond ...masons glue i think
Planning to have my pool tile replace. Would 6 inches of 1x1 tile be fine? Watch all your videos!
1x1 tile can sometimes be problematic around the swimming pool water line because it's so small little pieces will fall off into the water over time I like to use one by two as my smallest water line tile
Yes a 6-in water line is normal or standard for swimming pool construction you can do other things but a 6-in water line is traditional
I tell clients that 1x2 tiles is the smallest we go
Good luck 💪
@@UltimatePoolGuy Even though I like the look. I'd rather go for the durability. So 6x6 it is. Thanks for the reply!
Hi there , i need to replace the tile above the plaster and the coping , can it be done without doing the plaster ? my plaster is still good . thank you
Hello
Thank you for writing in and for your question
Yes you can get yourself an angle grinder with either a four and a half or a 6-in wheel depending on the size of the angle grinder and you can get inside of your pool on a set of scaffolds and you can cut yourself a line underneath your tile at the plaster line with your diamond blade
This now gives you a 6 in path where you can demo out your tile and create a new title line and then the bottom diamond blade cut would be filled with grout
@@UltimatePoolGuy Thank you very much.
Hey man I have a concrete deck and pool. I’m replacing my waterline tiles. There is a plastic “retaining ring” (not sure what it’s called) that the top of the tiles go behind. Do I need to keep that with the new tiles or can I remove it and grout the top of the tiles right to the bottom of the concrete deck? I don’t know what it’s for besides maybe holding the top of the tiles in place, but I don’t know if it’s necessary either. Thanks for the knowledge bro and videos I’m learning tons!
this sounds like the expansion joint at the top of the tile line
done with plastic
you can and should re do this with mastic//silicone joint
not grout
if you use a hard mason product like grout there is no room for expansion like the plastic joint or silicone joint and tile will fall off
this sounds like east coast vinyl pool
check with local codes and what is common for your area
Thank you so much for the reply man, you’re awesome! I’m in El Paso Texas and the pool was built with the house back in the late 90’s. Outdated codes maybe? I’ll look. Thanks again!
Hey man is there a specific “mastic joint compound” that you would recommend? Most of the compounds I’m finding is for the top of the deck, not where the bottom of the deck meet the top of the tiles. Thanks so much for your help!
You should be able to get away with tubes of silicone from home Depot or your local building supply these would be the same types of tube silicone that would go in a caulking gun this is for the top of the tile under the deck
You can apply this and wipe away the excess with a folded paper towel your finger or a folded piece of cardboard to leave The joint nice and clean and remove the excess silicon
Isn’t the bond beam crack just going to reappear and pop more tiles?
The decking around the pool was removed and not replaced as part of the work
The concrete decking around the pool pressing against the pool coping is almost always the cause of the stress that causes the crack in the bond beam
So removing the deck and not putting it back with concrete and putting grass in its place alleviates this pressure
But otherwise yes
The best way to address these types of cracks that go left and right in the bond beam is to remove the coping pieces completely in any of the damaged areas build the bond beam back up and replace the coping
Thank you for writing in and for your comments 👍
@@UltimatePoolGuy thanks for your reply. It happened to my pool and it’s only 3 years old! I can’t find anyone to fix it. I live in St George, Utah. You don’t travel do you?
It's a 5 1/2 hour drive so it's not terrible I would have to ask you to cover some travel costs and any boarding
So we might be able to work something out if you want to send me a more detailed description of what's going on with some photos to my email I'm happy to take a look
ultimatepoolguy@gmail.com
Thanks 🙏
So im working on my pool took coping and tile out now to build back broken plaster you use typs s mortar? and does it need waterproofed or does the tile and thinset overtop keep it from seeping through?
I do not recall us ever waterproofing the mortar bed ...usually we repair the base with spec mix or rapid set product lay the thin set and tile then grout
hope this helps
lmk if you have more questions
You should show exactly what brand and type of materials you are using in your video.
Thank you for the suggestion
A lot of what we use could be sourced from Home Depot or Lowe's
They are general building products but we use premium versions of what's available
Hope this is helpful
Hey brother, do you normally apply a waterproofing membrane (like Redguard or 9235 waterproofing) before you apply the thinset for the pool tile? If not, why? and if you do, when do you need to apply that? Thank you very much (I am in Florida otherwise I would hire you for sure)
Water transmission membrane no we do not however not could be a regional thing we will do demolition one pass for repairs and 1 pass for installation of and the 1 pass for grout
I have heard of guys doing a waterproof membrane for glass d tile installations
You may want to check with a local builder contractor to see if your region if it is recommended
@@UltimatePoolGuy I was asking because there are some mortar thinset for glass tile that already have the impermeability (like Ardex X77) and that if that would be sufficient. Thank you for the reply!
yes sir
stuff with the admix already in it is good to go
should need nothing else after that
you can always add some masons glue to your mix just to be sure
this sounds good
Thanks for demo. I have big cracks behind the some tiles. You mentioned, you use "high bond cement"to fill the cracks. Where and what brand I can get from?
Usually any rapid set product would work that would be their repair mortar or cement all products
Quikrete also has a hydraulic cement that we will use in and around the pool area that is also effective
You can find any rapid set products at your local Home Depot or hardware store
Hope that helps good luck🎬🎥💥💥
@@UltimatePoolGuy Thank you. I will try it.
@@UltimatePoolGuy When you use Cement All to fill cracks in the bond beam, how long do you have to wait before you can put thinset and tile over it? Are you able to set the tile that same day? Or do you have to keep it moist and let it cure for a few hours (or overnight) before you apply the thinset?
@@jbh123stl rapid set products - that include cement all can be used shortly after application...there are usually some set times and suggestions on the bag of material
Cool guys, awesome work and Mexican music 👍👍👍
Thanks brother! Really happy to hear the video resonated with you as well as the music👍👍😎😎
Thanks for checking us out!
what mortar did you use to fill the beam crack?
We like rapid set products
Spec mix also works
Plastic cement with sand also works
I would love to k ow how to install waterline tile in the deep end where I cannot stand to reach it. I used a ladder it slid out from under me ride it down scraping knees hands elbows there has to be a way to
th-cam.com/video/w9RxzTcasso/w-d-xo.htmlsi=xV86O8CFRBbEiiIh
Check out this video ☝️☝️
And tell me what you think about the scaffolding 🫱🫲
wouldn't polyurathane be a great crack repair for that horizontal crack?
We've never used that material before and this is a cementatious base so we use a cementation product
Dear ultimate Pool Guy thank you for your videos they are excellent. Will you please help me understand these questions: your bender board is about a half inch above the bond beam. And level. Do you then pour your mortar mix up to the edge of your level bender-board, let that dry and Then set your coping with thin set.?
Yes
And the half inch rise you're talking about ends up being the depth of the mortar bed for the coping so the taller your Bender board is there the deeper your mortar bed will be
Thank you so much. Do you do work in San Diego, if not do you have any contacts for remodeling/renovation?
Yes we can help you out in San Diego
Feel free to email me here:
ultimatepoolguy@gmail.com
Your information was priceless cause I'm doing my first pool tiling job tommrow as a handyman
right on brother thats what its all about
this will be same as bathroom or kitchen but outside
1 pass demo
1 pass repairs and level base (spec mix/rapid set)
1 pass install
@@UltimatePoolGuy you got it spot on brother hope yall being safe
Great words to live by !! Great knowledge Mike..
thanks Brother...glad that you like our work...thank you for the support!!
How do u get the tiles on straight? No water level or snap line?
Hello
Thank you for writing in
It is possible and I believe you can see in the video we are using a 2 ft and 4 foot Bubble Level to establish level and follow level around the pool as we work
We will typically save finding level with a water level for when we are working completely blind like establishing Plumb level for coping installation or setting the guide wires for shotcrete
Hope this helps
UltimatePoolGuy thanks! I work on pools too so i was wondering
@@joerondeau9814 ok great thank you for taking a look at some of our work...there are lots of other great videos on the channel that you may enjoy
stay real out there!
Maybe one day you can do a vid about the variations and differences between concrete mixes. Like what type to use for tile, coping , Gunite and plaster. Either way there’s no better channel out there than yours Vato.
That's a good idea thank you for writing in and suggesting that
When you go to home Depot or the building supply yard it's easy to get confused but basically there's mortar products then set products and concrete products
Rapid set
Make some products that we like to use and we use often such as rapid set Mason mix brown bag and rapid set cement all
Quikrete also makes products that we like to use such as their hydraulic cement
As far as concrete mixes anything will do in your 90 lb bag varieties
And for plaster is always white sand and white cement and then you make your variations from there
Hope this is helpful 💪
what was the mortar mix you used?
Spec mix type s
And rapid set motor mix
In general rapid set products we like to use around pools
They have a few different kinds of products available from home Depot and Lowe's type suppliers
For your spec mix you can also add Mason's glue for better bonding strengths
Hope this helps
What type is cement you use?
@@MinhNguyen-cj2ln pro lite non sag thin set and rapid set products for repairs to the base
All available from home Depot
Hope this helps
Thank for your video!
Good job
Thanks for watching!
Please do a video on
Lean To Scaffolding.
Thanks for your insight!!
right on brother that is a good one that i will keep in mind...thank you for writing in
in short lean to scaffolds have been around since the beginning of pool work but are not legal and not osha approved so these are made by each technician and welded together usually a set (2) of shorts and longs to set up around the pool with wooden planks
What thinzet you ise for tile my freind
pro lite non sag
usually available from home depot
Love this pool guy! Your my idol bro
thanks brother for the great comment...so happy to hear that this video connected with you!
Stay Real!
I’m looking to do a build by owner pool and want to do the tile. I’ve done floor tile but never on pools. Do you use any special adhesive or grout ? Thanks
hello thank you for writing in...yes that is a great comparison pool tile to floor tile...
1.strip old material
2.clean and repair base...want smooth and chunck-age free...repair with rapid set products and make level
3.set 6in. water line tiles 3x3, 2x2, 6x6, etc...with non-sag thin set - we like pro lite products...set each piece nice and level all the way around
4.clean joints and grout with sanded grout
start and stop at the skimmer mouth just like in the video
pro lite thin set
www.doitbest.com/products/261276?gdffi=46857429cc1343fcae2c0324cc87e14a&gdfms=9FD80D7B92CF4CEFBAEAA0DC9F93168F&gclid=Cj0KCQjwho7rBRDxARIsAJ5nhFraOu9JF5kQaLGXIpfcOR0Y3Mtyo29rq2eaQ1kJ4ZtaQUAiQ9wFJckaArGhEALw_wcB
good luck and let us know if you any problems or questions
UltimatePoolGuy Do you have to wait the 14 days the tech specs say for prolite before submerging?
Video Timeline:
0:00 Theme Animation
0:10 Overview of the damage to pool wall and coping/ initial steps
1:15 Setting the skimmer and tiling the skimmer opening
3:04 Grinding out crack in pool wall and filling with concrete
4:10 Repairing broken corner of pool coping with thin-set and mortar
5:25 Tiling over radius with thin-set
6:05 Sawing tile to size
6:40 Setting tile on vertical pool wall and flat mortar bed
7:20 Example of skill: Alfredo 'Fast Hand' De Fabricante De Piscinas
7:35 Your responsibility for living your life, in general
Hi there , i need to replace my pool 120vo to 12v lcd lights , can any electrician do that or it have to be an electrician with pool experience? THANK YOU.
A lot of residential electricians do not like to work on swimming pool equipment however you can call around and usually any licensed electrician can handle this type of work
@@UltimatePoolGuy . Thank you.
🤜🤛
I have identical tiles and some are falling off. What type of cement or mixture should I use to re attach them?
Prolite non sag thinset
With sanded grout
Available from home depot
@@UltimatePoolGuy thanks so much for replying. I tried doing it with Portland cement recommended by a pool place and it didn't last long. Would you recommend anything to fix gunite in my pool? Problem was I let ice build on the tiles and couple popped off but Also some chunks of gunite underneath them. Would like to patch them to make it look a bit better. Would be nice to have some type of gunite spray cans lol
You can use rapid set products also available from home Depot for your areas that need small patching or repairs
Rapid set mortar
Rapid set cement all
Are both good
@@UltimatePoolGuy I will do that.... any use in me trying to match colors or is that a loosing battle ? I noticed all cement gets washed out to light gray pretty quickly
You should not need to color match any thing
Does your service include Diamond bar CA area? What your service number?
Ultimatepoolguy@gmail.com
Feel free to email here
Really nice work .
Thank you! Cheers!
Hello,
I have a 36 yr. old vinyl liner pool 18' round with bullnose coping and was just informed by my contractor that it would be best to fill the pool with dirt and close it out because the coping is shot. He indicated that the cost to repair wouldn't be a good return on investment. Would this be your recommendation? Can I buy the coping and do it myself?
Thank you!
a vinyl liner pool that is 36 years old is a very old pool
vinyl liner pools are not constructed like a concrete structure pool
sad looking or completely broken coping is not a reason to not use a pool or to close it completely
a pool that has structural cracking and leaks uncontrollably is a reason to shut a pool down completely
a pool closure is also dependent on the region that you live and there may be other factors at play here that we are not aware of
you can always circle back around to the contractor that suggested a complete closure and ask for the merits behind that
we see pools all the time in various states of disrepair that are able to maintain healthy water/water quality conditions and the pool is still being used
if you are trying to sell this property with a broken pool and do not want to or can not do the repairs you can always sell the property with the pool broken
Hey man do you know what I would use to reattach a broken piece of flag/sand stone back to main stone? Great video by the way
This set
Or spec mix
Should work out fine you can also look at rapid set products those are also very effective and should be available at your local hardware store
Such as rapid set mortar mix
@@UltimatePoolGuy sweet! Wanted to fix the caulk around the pool, had a stone that was cracked, probably from the bad caulk lol, good deal
Thinset""
@@UltimatePoolGuy you got a go to thinset/motar for your pool remodels?
Sounds good brother thanks for the suggestion and good luck with your project
Love it thanks for the video
🤜🤛
I came to find out how to install pool tile. I got that and a good sermon. lol
Thanks for writing in brother 🕺🏾
🔪
Sharpens
🔪
Happy ronas!
😷🚫
Keep that ish coming rock on bro!! Living life sick!!!
That crack is not in the bond beam. That crack is the mortar bed that adheres the coping to the bond beam. You should always replace those coping and mortar bed before installing new tile. This is BAD information. 30 years renovating pools on the east coast.
Sounds good brother thanks for writing in and for your generous comments have a great day
💥💥💥💥
🤯🤯🤯🤯
Sweat exactly is the thin said you use to install the tile name brand bag number whatever
We use Pro-Lite non sag thinset
👌💥🤩🎬
prolite non-sag thin set mortar
www.google.com/search?sxsrf=ACYBGNSbD6ykPMHlPKApb81-wZX8ctH2-w%3A1570669458395&source=hp&ei=koOeXen7FIWosgXfibngDA&q=prolite+thinset&oq=prolite+&gs_l=psy-ab.3.0.35i39j0l9.1897.3352..4460...0.0..0.346.1381.1j5j1j1......0....1..gws-wiz.......0i131j0i10.e4AvIX4XAes
I aspire to be like you man!
thank you for writing in brother
the change you want to see in the world is already inside of you
spread positivity
stay real out there !
How much did that cost?
Around 3500
Pool tile installation is priced on the size of the pool
Ultimatepoolguy@gmail.com
Good stuff bruda
🤜🤛
Thanks for writing in
Love the video Mike. A video on grouting the inside of the skimmer may help us out here. I find so many freshly built pools where leak detection finds a leak in the skimmer throat. And include a grout vs. epoxy repair breakdown in said throat. I hate that so many brand new pools get epoxy patch jobs but wonder if it even matters. God bless brother.
In Los Angeles we prefer grout or rapid set products in the skimmer mouth over epoxy
Thank you for the video recommendation
This is a common issue and a common area where their problems often times the skimmer mouth is plastic mating to the back of the pool which is cement
Nice job bro
Thanks for writing in
Stay real out there
🤜🤛
Is it a requirement on TH-cam to play excessively loud crappy metal music in the background ? Turn good informative videos into unwatchable 80s heavy metal concert
💟💟
YOU like rapping explain this bro. 😂 good content
🤜🤛
This is a concerned kind of a job first of all you need to provide safety PPE (Personal protective equipment ) for your workers man, no goggles while grinding what happens if he damages his eyes, Oh Workers Comp ok if no WC the PO (property owner) gets the responsibility Big Time I am not trying to discourage your work just a reminder to be safe at work.
Sounds good brother
The way you see us working in these videos is the way we work everyday
Cement or mortar... same thing. I bet you install Hayward equipment
Edit: forgot mud
semantics brother...
get busy working and grinding and less time nit picking like a stay at home mother, stay productive and roll with the punches
you also forgot pig snot?...where does that apply?
thanks for checking us out and writing in...ill give you a shout out on our next release
stay real!
also technically speaking mortar is a cementitious product =)
the equipment I select for each project represents the best performance choices for that particular pool configuration...I try to leave the client and pool with the best set-up possible and set them up for long-term success!...my ego isn't really attached to any singular product or brand, although I do have my preferences
hope that helps
SNAPS TO THOSE SPOKEN WORDS!!!!!!!
thank you for writing in
Two things ... 1st. Is it an specific thin set or you can use any type??? 2nd freaking Alfredo is having a pool party he just need a 12 pack of Modelo .... Jajaja
we like pro lite non sag thin set
www.google.com/search?sxsrf=ALeKk00HUp-zHUCeFfWC-9zt4ljMjCInIQ%3A1614107109737&source=hp&ei=5VE1YJGqKNDGsAWDpLzACQ&iflsig=AINFCbYAAAAAYDVf9cwjr1eTIzJtsaB6aS2klUoYBWFG&q=pro+lite+non+sag&oq=pro+lite+non+sag&gs_lcp=Cgdnd3Mtd2l6EAMyBQghEKABOgQIIxAnOgUIABCRAjoCCC46BQguELEDOgsILhCxAxDHARCjAjoICC4QsQMQgwE6CAgAELEDEIMBOgcIABCHAhAUOgUIABCxAzoCCAA6CAgAELEDEMkDOggILhDHARCvAToECAAQCjoGCAAQFhAeOggIIRAWEB0QHlCMEViOKGCDL2gAcAB4AoABwwOIAd0RkgEKMy4xMS4xLjAuMZgBAKABAaoBB2d3cy13aXo&sclient=gws-wiz&ved=0ahUKEwjRsJrH2YDvAhVQI6wKHQMSD5gQ4dUDCAk&uact=5
the Modelo's are just off screen brother
stay real out there!
@@UltimatePoolGuy thanks
Looks like a coping hack. Skimmer needs more cement less rocks for fill
good eye
thank you for writing in!!
words of wisdom!!!! BADDASS!!!!!!
thanks for the support it really means a lot to me and my guys!!...best wishes to you
Been doing pool tile for 15 years and I can assure you that pool hack job will leak. Looks like someone made a video without knowledge of the pool industry in and out…..
I agree 👍💯
Thank you
And thr guy who made the video agreed 100% 😂😂😂
@2StrokeMichael I always heard pool tile needs waterproof behind it to avoid efloressance. Is that just not being done here or is it already part of the bond beam?
Don't drink at work
you can get hurt or hurt someone 🤣
Sounds good brother
Thank you for writing in
🤜🤛
One mistake you made was no frame for skimmer nor new rebar
Orle
Why didn’t you waterproof the crack 🥲
Inspiring
🤜🤛
Prolite! for the hundred plus times..geesus!
No back butter on the tiles 😢
I cover back buttering in our coping videos 💪
Thank you for writing in 🔥
That coping tho lol
client elected to keep it
Bro I’m looking for a job hook me up been doing pools for 5 years
ultimatepoolguy@gmail.com
email me here please
Yes dad!
thank you for writing in
=)
Came here to get some pool tile & concrete tips. Mike, could’ve done without your philosophy.
It is sort of rooted with Andy Dufrane from shawshank redemption
Get busy living or get busy dying
🎂
UltimatePoolGuy - you need Morgan Freeman to do the narration 😁
Good video though. The pool company put the wrong coping on my pool, had it replaced with large 3-4’ shaped blue stone, but the pool company were jackasses and just filled in behind the tiles where they removed the coping and put sand in and now the whole beam is gone.
So I’m cleaning out all of the sand and removing the tiles without damaging the plaster under it and will have to rebuild the whole beam. Then install all new tiles.
Just been reading up and watching videos on acid spraying to prep the old concrete and then make the bonding coating and now just trying to see if I should be using mortar or Portland-mortar to rebuild the new beam.
Your video was very helpful, that’s a huge project and your team is doing nice work 👍
Sounds good
Good luck
And thank you for writing in🎂
Mike i lov u!!
Hermanos por vida….sangre en el campo de batalla!!
Don't watch this if you're high
🎂
he spits when he talks
What in the hell did I watch
Sounds good
No mamen en la esquina una pinche barilla de perdido 😂😂😂😂 no se crean para hacer el jale rápido chin Marín lo que se pueda mas rapido
thank you for writing in brother
Say no to drugs
I believe it's say ugg" to drugs
1980's
stop smoking your lunch
thank you for writing in
Horrible job you should be a shame of it
I am
Full of shame
☀️
You have inspired me to change my last name to shame
I'm going to spell it like this
S
H
A
M
E
👍
hey brother i just woke up from a nap and i am full of shame
spelled
s
h
a
m
e
what do you think?
It how to reach waterline tile in the deep end I can’t reach mine
@@stevequate1797 use scaffolding there's a video on the main page about it
@@stevequate1797 th-cam.com/video/w9RxzTcasso/w-d-xo.htmlsi=pzRm8FpiEuYkBhnh
☝️☝️☝️☝️ Here