The fact that it comes with a cleaning kit just sold me. I’ve had the same Bones bearings cleaning kit for 8 years and over the years it’s gone sorta nasty gross. It got the job done but I’d like to get another set of ceramics and a new cleaning kit so it’s a no brainer to buy these next. Thank you for this video!
Just bought this kit. It has a major flaw in that the top doesn't actually snap into the unit. Two reasons I think this is bad: 1) There is no easy way to keep the two pieces together... I think this will be a constant annoyance. 2) I thought about keeping spare bearings in the kit. The only way I'll be able to do this is tape the top on, which is also pretty annoying. I'll probably buy the bones bearing cleaning kit because at least it screws together to be one piece. Bronson could probably modify one mold and then remake the second to add a snap to close lid for version 2.0.
The bearings in this video weren't designed to be spun dry. Resist the urge to spin your freshly cleaned bearings if they aren't lubed, it's very bad for them.
If you’re shieldless you shouldn’t us oil at all as it attract dirt, I honestly think all dry bearings run better regardless. Bearings don’t get hot enough to need lube. This isn’t an engine, unless you’re long boarding and regularly going 30mph or more.
I cleaned my wife's bones bearings and when I put the dust covers back on just as shown the bearings no longer spin freely. I don't get what I'm doing wrong. Any advice?
It could be one of a number of issues: 1. The seals may have been bent- some bend easily. 2. you're installing the seal on the wrong side of the outer or inner race (some races are uni-directional.) 3. The bearing cage (or retainer) was installed on the wrong side relative to the race and/or seal.
Wasted my money on this device that just made the bearing keepers dry and start disintegrating into the bearing slowing down the balls. Ruined my bearings should have just oiled them instead DO NOT BUY 🖕
"isotropal" alcohol is best
Hard 2 find
I prefer to use you for cleaning bearings instead.
The fact that it comes with a cleaning kit just sold me. I’ve had the same Bones bearings cleaning kit for 8 years and over the years it’s gone sorta nasty gross. It got the job done but I’d like to get another set of ceramics and a new cleaning kit so it’s a no brainer to buy these next. Thank you for this video!
I spray electronic cleaner that evaporates, a quick rinse with alcoh, then lube with Speed Creme.
Solid! Thank you Rhino & Bronson
Great video, thank you. I just got the bronson oil and cleaning kit in the mail today.
Just bought this kit. It has a major flaw in that the top doesn't actually snap into the unit. Two reasons I think this is bad: 1) There is no easy way to keep the two pieces together... I think this will be a constant annoyance. 2) I thought about keeping spare bearings in the kit. The only way I'll be able to do this is tape the top on, which is also pretty annoying. I'll probably buy the bones bearing cleaning kit because at least it screws together to be one piece. Bronson could probably modify one mold and then remake the second to add a snap to close lid for version 2.0.
Made my day! Thank you :)
The bearings in this video weren't designed to be spun dry. Resist the urge to spin your freshly cleaned bearings if they aren't lubed, it's very bad for them.
I have the oil and have the Bronson G3 haven't use them yet tell my other bearings exploded being dry out or way to much dirt on them.
Rhino is rad
Which solvent do you think works best? Isotropal alcohol or acetone? I’ve never used isotropal alcohol
Isotropal is more mild. Unless you had major rusting and were trying to selvedge them I would stick with Alcohol. .
I sometimes don't oil it after cleaning they sound better , the oil also attracts so much dirt
If you’re shieldless you shouldn’t us oil at all as it attract dirt, I honestly think all dry bearings run better regardless. Bearings don’t get hot enough to need lube. This isn’t an engine, unless you’re long boarding and regularly going 30mph or more.
i need these pronto. atx local shops dont have them
No comply should I lived there last year and remember seeing them if they don’t have them I know zumiez does
Zumiez has it
yo i got my board from slappys too
I cleaned my wife's bones bearings and when I put the dust covers back on just as shown the bearings no longer spin freely. I don't get what I'm doing wrong. Any advice?
It could be one of a number of issues:
1. The seals may have been bent- some bend easily.
2. you're installing the seal on the wrong side of the outer or inner race (some races are uni-directional.)
3. The bearing cage (or retainer) was installed on the wrong side relative to the race and/or seal.
thank you ;))))
is the lube a requirement for the ceramics
Yes, they generally require a specific lube.
do I need the oil or can I use the bones cream?
you can use the bones one too
soo uhh how much is 40ml
Can I use 91% alcohol?
You can use atleast 70% or higher
Rhinooo
just use windex
Or you can get the same kind of alcohol at the 99 cent store!!
I G N I T I O N
Wasted my money on this device that just made the bearing keepers dry and start disintegrating into the bearing slowing down the balls.
Ruined my bearings should have just oiled them instead
DO NOT BUY 🖕