Bones Bearings Cleaning Unit Review
ฝัง
- เผยแพร่เมื่อ 17 มิ.ย. 2014
- Check out our Bones Reds Skateboard Bearings at www.skateamerica.com/bones-bea...
Stay up to date with Skate America. . .
Website - www.skateamerica.com/
Subscribe - th-cam.com/users/subscription_c...
Facebook - / 116980175015679
Twitter - / skate_america
Instagram - / skateamerica - กีฬา
Simple and quick enough to understand for a first time. The written instructions were kinda too long for nothing... There's a limit to perfectionism and I like that video dude. Thanks.
i use bronsons bearings, and i think they have a shield on both sides. Should i remove both shields in that case?
Is it ok to throw the axles in there too? Or maybe not needed
where can u buy solvent?
Can you use jigloo oil?
Acetone like nail polish remover?
lol lets "pretend" that I liked and subscribed. xD
Will the acetone cause any problems for the nylon inner race ?
Yes
great video. how often should I be doing this on my bearings? like every 4-6 months?
no it hasnt got answer because if you skate rainy and dirty place you have to wash it like after 1 hour after you cleaned but if you skate really good and best not dirty place you can wash them around 1 year so it can be change. hope i can give answer that you want hear thanks and good luck :)
Depends what you're skating. I skate alot of street and use my board as transportation so I clean mine like every couple days. If youre just skating park I'd say like twice a month. All depends tho
I just ordered this and the bearing puller... I want to take care of my investment!
Informativ video :)
Nice & Thanks 😃
does rubbing alcohol work?
Can I use speed cream for the solvent?
That Silly Swine Speed Cream is to lubricate it, not to clean it. Don't listen to this guy, use natural cleaners that contain Di-limonene. It helps alot more.
So is there a certain way to use bones reds bearings? Because there's only one side of the bearing with the red shield?
just take off the shield
use them like any other bearings and dont take off the shields
OM he USED THE SAME PRECISION SCREW DRIVE THAT I USE
what you use to clean the red cicrles go around the bearings ?
I actually use my semen
@@RicardoPerez-fd7bh AYO *WHEEZING*
@@RicardoPerez-fd7bh do you even lift bro?
Bro I ordered this without this peed cream at the end does that bring anything?
if you order them with spacers will the spacers come
they come with the spacers
can i use 99% iso?
Hi, thanks for the informative video!!!! Is it possible for the bone bearing cleaner to hold isopropyl alcohol in it? For cleaning the bearings!Thanks!!Cheers :)
Nice video, very helpfull!
99% isopropyl would work? right?
Do they have to be bones bearings? I use Swiss
Exocast00 This guy will work with any bearings.
Yea they do
so i have bronson g3s thell work with this
bones is swiss
Don't waste your money on Bones speed cream it's $5 , just buy some 3 in 1 oil works way better and you get way more oil. and for cleaning the bearings itself use 91 percent alcohol or gumout carb cleaner.
have it but don't know how to use it
also the speed cream
@@ozzy_fromhell well that's why you watched the video, to learn how to use it...
It says on my bottle that you can use WD-40! so what is correct solvent to use?
It says you can't.
Bad video. Where's the solvant, does the bottle come without any solvant? Why is the most important part not included in a review video? I didn't learn anything because this is not a review. You should've tested the kit and give a full opinion on it
I’m gonna use 99 % alc. cheap on Amazon for a gallon.
Thanks man. Acetone breaks down the seals. Ruined!
Exactly thats why i use wd 40 butttttt i mix it with a lithium based grease so it cancels out the water and the lube is applied... Ive only used wd 40 for cleaning the bearing then applying the grease which helps alot and ive had the same bearings for about a year now and theyre just as good as they were the first day
Are you talking about the nylon inner race ?
Use nitrile gloves, not latex gloves.
This thing costs like 20 bucks and I made one myself for like 5 dollars.
great, would be helpful if u wrote how u done that.
@@Christufeur Just look up on youtube "homemade skateboard bearing cleaner"
Personally I used a small gatorade bottle, rubber gasket, wingnut and and a length of bolt. I've made a couple more since 3 years ago and I still even had the original up until last year.
Must be piss poor as well 😂
For the price of this plastic bottle you can get 2 bones reds
Wd-40 will make your bearing rust? 😂😂
just use 100% acetone lmao easyyyy fix
Naughty naughty what do you make with your acetone heh?!
eh i might as well just buy new bearings.
WD40 is the best lub for your bearings, i use it all the time for my ABEC 5s.
+Will Polak
Dubba Dee Fohar Tee werks gewd wheth mie aye beck wun bureeings awn moi bord fram wulmurt. 8/8 troi et m8
It actually damages your bearings use citrus acid it helps clean it and lubricates it.
🤦♂️
Don’t buy bones speed cream. Just spit into your bearings and give them a spin. You will go really fast, you can also use semen.
Best way to oil up the bearings is wd-40
wd40 is a de-greaser
You're not serious, right? WD-40 is the OPPOSITE of a lubricant. Its a degreaser!
🤦♂️
where can u buy solvent?
any hardware store like ace or lowes or home depot etc