Is it stupid that I come back to the first video that taught me how to carve? Even though I've watched this over and over again the way you can explain shit to me is perfect man honestly thank you and keep'em coming bro. Say high to jesse for me lol!
Thank you Jordy, very practical and extremely helpful. I have made one, but now I feel inspired to do another. You’re an excellent teacher - this, from a teacher.
Excellent Mr Johnson very clear tutorials full of great tips and instructions. Love your no messing about approach and you’re by no means boastful or big headed. Good old fashioned humility speaks volumes about a man. I could watch you and listen to you all day. Thanks for your help and inspiration.
I'm a newbie. I would like to thank you for inspiring me the ability to be USEFUL again in Life. Long story short I was diagnosed with Gillian Barr Syndrome. It's a disorder that causes paralysis from head to toes. I've managed to get back to walking in 4 years. Not being able to go back to work and still a long way to recovery . I saw 1 of your videos, then I seen several. You are a very talented person. Thanks again pal, Brian M. Of Va. Not the Brian M you have in your workshop on the round stock in the videos. 😂
Hello Mr. Jordy I'm Michelle and I've been into carving ever since I seen your carving videos. You are so good at it, and I love it! I've actually sold 2 of the first spirits I carved, wasn't trying to sell them, I was just offered. I even received a flex shaft dremel for my birthday. I just wanted you to know that you are fabulous and my inspiration. Sincerely Michelle Doyle Las Vegas, Nv
Wished I'd gone down this road... I bought carving tools (knives etc), yup I have two lovely wood spirit/Viking type carvings that I'm rather proud of, but it takes me days what it takes this minutes to do & my left hand has multiple scars, holes and scratches. Nice job and I love that "Kutzall Flame Rotary
@@CarvingFusion Lol, I've already been on Amazon looking.. My first aid box & my hand have had enough! :) keep up the good work, best wishes & thanks for helping me out with this video.
Seeing this in real time shows just how much patience you need. I hope I have what it takes. I just received my extreme burr today and am looking forward to seeing what I can do. Thank you for your teachings, Jordy!
Just to add to last comment I a marine vet recently sent home with honors and PDS this was recommended was a good treatment for me and your the teacher I have felt closest to hope to hear from you soon
Been carving for awhile now the 1st video i seen didn't care for not sure why. Watched another glad I did thanks. Not my way I use knives but I see how a dermal will cut away a lot of wood like that. Not saying knifes are better just like them more
Thank you very much Jordy for taking the time to teach people how to carve.I have watched several of your videos and have carved a couple wood spirits after watching your videos. Your videos are very well done .I have watched others but like yours the best
Hi Joddie love your videos you’ve inspired me to have a go I bought a cheap galaxy pro with flex shaft and all the kit that came with it cost me approximately £26 sterling quite a good weestarter pack rather than jumping in at the deep end and spending a few hundred pounds on something that you may not like so started in at the cheap and just to see if I could do something with this fabulous idea of yours I must admit The package came with several burrs and I bought a flat so extreme plain but it was fabulous once it got settled in then it stopped bouncing about all over the place and now I love it probably have to buy some more various bits Anyway Joddie as they say in Newcastle in the UK why are you a man Which means how are you doing❤❤😅😅
Just wanted to say thank you for the video my friend! I just got into carving (both my uncles were old school woodworkers even my uncle russ had the signature jerry Garcia hand..lol. I thank you and TH-cam videos cause I never got to ask them queations before they passed away cause I wasn't into this yet. Again thank you from Ohio.. Matt
Oh and this is the first video I watched of yours but a little trick for detail work I learned is take a small paintbrush or a daul rod and superglue some sandpaper to it.
Thats what my snowboarding instructor said lol. Not sure if it'll upload but here's my first stealie and hummingbird I made for my mom. Stealie was just scrap plywood (just messing around) and hummingbird was pine that I bought from lowes that split apart so I recycled it.
I’ve just subscribed to your channel Jody ........I carve walking stick handles ....done it for years........but have started my first wood spirit thanks to you ......not to good but I intend to get better........I enjoy your channel and allways introuble with my wife being on it to long.........keep them coming.....it’s all good stuff......I’m from England.
Hi Jordy, very usefull your videos. I'm trying and trying but I'm still far, far, far from doing a face like yours. Don't stop your videos please. Christian from Switzerland
This is great and im learning alot from you before I even try carving my first spirit..........keep up the good work ................ I have a master carver and tack life rotary with several typhoon burrs etc...... just spending my time now watching before i try it out...........thanks
Got to say.. I love your videos. You have given me so much information, which has help me have the confidence to try my first carving.. Thank you so much.. Keep up your wonderful videos. I appreciate them all.
Hey brother - Thanks for all of the videos. You're an epic teacher and I appreciate that you took the time to make these! Throwing a wood spirit on the handle of a spoon I made...harder to get em small tho! All the best dude
What diameter do you suggest for carving? This one looks fairly large. Others look smaller. How large was this one and what is the smallest you suggest?
I am learning from you and still waiting for my kutsaw burr to come in mail trying to follow you but using lame dremel burrs But thank you I would send you a pick of my first one so far without the right burrs but not sure if you read or respond
Carving Fusion By : Jordy Johnson Thanks for the quick response. I haven't seen it in person yet, but it seems best value for money. However, I was thinking it could be a bit too big to handle on more delicate work. The 3000 seems a bit more pen-like and lighter but I could be completely wrong. Does the 4000 give a pen-like feeling? Would it be too heavy (considering a average size / strength woman)? Thanks again
Carving Fusion By : Jordy Johnson A-ha... Now I understand. I hadn't realized there was a separate, flexible shaft. That's really cool. I'm totally new to Dremel. Thanks a lot. Now I know what to get. I think we're going to have a lot to do this weekend.. :-)
@@calembur there is a link to one in my amazon under my newer videos, not trying to push it on u lol or just look on amazon! U REALLY NEED THE FLEX SHAFT, ITS A GAME CHANGER
@@CarvingFusion Tried that! they say they don’t stick inners and that I have to purchase the whole flecidrive😩 Is there any of the other Dremel inners would fit? For example the 4000? If I can’t get one the machine is scrap as I’m not going to pay for a new Flexshsft every time I break an inner😡 Thanks for your reply!
Hi Love your carvings just inspiring!! Found this video a bit difficult to watch, I think you were onto it, the light was a bit too bright. Keep up the awesome work... waiting on my first Dremel to be delivered, can't wait to try my first ever wood carving, thanks to you!! Peace out from Scotland!
Thanks.... as I said.... you will be the first to see my FIRST SPIRIT.... I have been carving (just an little bit) with my new KUTZALL BURRS this afternoon but it wasn't a SPIRIT... it was a SKULL that I started quite a while back... Just to TRY out the burrs... they work well... I only tried the 1/8 not the 1/4
Old show Jordy, ,but I didn't want to be disrespectful on your tribute cast for George. I tried unsuccessfully to find a way to reach you in pm. So I'm doing here. Over the last two months I have been watching your cast and enjoyed the atmosphere. I did pick up many useful tips and technics thank you.. You provid a good distraction from the hackers and trolls who magically appeared on every site I I paused on. And your subtle manner allowed me to completely miss that you are part of this as well. Not to place all the disappointment I have in the behavior of adults everywhere on your shoulders. ( I'm not) but I expected a bit more from someone who has had their own trials and struggles than to join with the mob mentality that what they are doing to a fellow human being. Is perfectly fine. And okay. Please stop talking about how you are there to help people, unless it is something that you really truly do because a joke is only funny when everyone can laugh at it. ( Oooo) nice wood spirits Jordy.
Is it stupid that I come back to the first video that taught me how to carve? Even though I've watched this over and over again the way you can explain shit to me is perfect man honestly thank you and keep'em coming bro. Say high to jesse for me lol!
Thank you
You have inspired me to try this. I'm so grateful to you and for you. Stay true to you, I love wat hi g and listening. Be real
Aww thank you pam
Thank you Jordy, very practical and extremely helpful. I have made one, but now I feel inspired to do another. You’re an excellent teacher - this, from a teacher.
I like your carving ,I 'm a Vietnam veteran and i tried wood carving like you , think you.
Just started using a dremel and getting into carving. Usually I'm a wood burning kind of guy. I'm really greatful for your videos! Thanks!
Awesome good for you and thank you
Love it!
Ive just started to make my own.
Its so relaxing going out to the garage and just sit and carv.
Excellent Mr Johnson very clear tutorials full of great tips and instructions. Love your no messing about approach and you’re by no means boastful or big headed. Good old fashioned humility speaks volumes about a man. I could watch you and listen to you all day. Thanks for your help and inspiration.
Thank u very much Ed
I gone and done it. Did my first wood spirit. Pretty happy with it for my first one! Thanks to your videos...
Wicked good for you
I'm a newbie. I would like to thank you for inspiring me the ability to be USEFUL again in Life. Long story short I was diagnosed with Gillian Barr Syndrome. It's a disorder that causes paralysis from head to toes. I've managed to get back to walking in 4 years. Not being able to go back to work and still a long way to recovery . I saw 1 of your videos, then I seen several. You are a very talented person. Thanks again pal, Brian M. Of Va. Not the Brian M you have in your workshop on the round stock in the videos. 😂
Lol awesome and I am.glad u have found something to bring you piece
I've started a wood spirit carving. I'll send you a picture when I get it done.
Hello Mr. Jordy
I'm Michelle and I've been into carving ever since I seen your carving videos. You are so good at it, and I love it! I've actually sold 2 of the first spirits I carved, wasn't trying to sell them, I was just offered. I even received a flex shaft dremel for my birthday. I just wanted you to know that you are fabulous and my inspiration.
Sincerely
Michelle Doyle
Las Vegas, Nv
Awesome and good for you!!!
Tha k u for sharing and keep at it u will sell them all
Wished I'd gone down this road... I bought carving tools (knives etc), yup I have two lovely wood spirit/Viking type carvings that I'm rather proud of, but it takes me days what it takes this minutes to do & my left hand has multiple scars, holes and scratches.
Nice job and I love that "Kutzall Flame Rotary
Well... u can always buy a dremel..
@@CarvingFusion Lol, I've already been on Amazon looking.. My first aid box & my hand have had enough! :) keep up the good work, best wishes & thanks for helping me out with this video.
Seeing this in real time shows just how much patience you need. I hope I have what it takes. I just received my extreme burr today and am looking forward to seeing what I can do. Thank you for your teachings, Jordy!
Awesome rick carve deeper and the mire u make the faster and better u will get
Just to add to last comment I a marine vet recently sent home with honors and PDS this was recommended was a good treatment for me and your the teacher I have felt closest to hope to hear from you soon
U can email me at canadian1dude@gmail.com
Been carving for awhile now the 1st video i seen didn't care for not sure why. Watched another glad I did thanks. Not my way I use knives but I see how a dermal will cut away a lot of wood like that. Not saying knifes are better just like them more
Thank you very much Jordy for taking the time to teach people how to carve.I have watched several of your videos and have carved a couple wood spirits after watching your videos. Your videos are very well done .I have watched others but like yours the best
Hi Joddie love your videos you’ve inspired me to have a go I bought a cheap galaxy pro with flex shaft and all the kit that came with it
cost me approximately £26 sterling quite a good weestarter pack rather than jumping in at the deep end and spending a few hundred pounds on something that you may not like so started in at the cheap and just to see if I could do something with this fabulous idea of yours I must admit The package came with several burrs and I bought a flat so extreme plain but it was fabulous once it got settled in then it stopped bouncing about all over the place and now I love it probably have to buy some more various bits
Anyway Joddie as they say in Newcastle in the UK why are you a man
Which means how are you doing❤❤😅😅
Thank you for your reply Joddie. Much appreciated. Still can’t send you any pictures of my first attempt.
Finally a great instructional video! I'm going to give this a try.
Awesome u will love it
Really liked the step by step process. Helped me a ton. Thanks
Me encantan sus trabajos y las figuras que hace son un arte yo me he comprado una mini moladora y voy voy a intentarlo
Just wanted to say thank you for the video my friend! I just got into carving (both my uncles were old school woodworkers even my uncle russ had the signature jerry Garcia hand..lol. I thank you and TH-cam videos cause I never got to ask them queations before they passed away cause I wasn't into this yet. Again thank you from Ohio.. Matt
Oh and this is the first video I watched of yours but a little trick for detail work I learned is take a small paintbrush or a daul rod and superglue some sandpaper to it.
@@stellarroddities755 wicked mat jist remember carve deeper
Thats what my snowboarding instructor said lol. Not sure if it'll upload but here's my first stealie and hummingbird I made for my mom. Stealie was just scrap plywood (just messing around) and hummingbird was pine that I bought from lowes that split apart so I recycled it.
Tried to post the pic but youtube said it had to be cleared or something lol. Anyway I'll hit that subscribe button for ya. Thanks again
I’ve just subscribed to your channel Jody ........I carve walking stick handles ....done it for years........but have started my first wood spirit thanks to you ......not to good but I intend to get better........I enjoy your channel and allways introuble with my wife being on it to long.........keep them coming.....it’s all good stuff......I’m from England.
Should have said Jody.
@@frankeskrett4158 its jordy :)
Hi Jordy, very usefull your videos. I'm trying and trying but I'm still far, far, far from doing a face like yours. Don't stop your videos please. Christian from Switzerland
Awesome just keep at it! Thank you
That's very cool I like your videos. Respect 👍
Nice
massive love from Dublin Ireland, you gave me inspiration man. I LOVE THIS GAME
:)
Love your videos Jordy, you got me playing with my Dremel again. I can definitely feel your enthusiasm and passion.
:)
This is great and im learning alot from you before I even try carving my first spirit..........keep up the good work ................ I have a master carver and tack life rotary with several typhoon burrs etc...... just spending my time now watching before i try it out...........thanks
Cool, ya o started put with typhoon burs , good luck carving a spirit make sure to send some pics when done !!
Thank u
Watched every video...you taught me a lot.aloha
Ty
Very cool videos
👍👍👏
I'm From indonesia✌
Cut and feather cut and feather....Amen
Good stuff!!
Got a dremil for Christmas, with the flex shaft. Gonna have to get some more tips to do stuff like this.
Just wanted to let you know your videos caught my interest and made me decide to give it a try... excellent job and thanks for all the tips and tricks
Wicked thank u
Love your channel dude!😂👍☘️
Ty
awesome series ! perfect for a beginner such as myself . looking forward to more .
Rite on looking forward to seeing ur finished piece
Thanks for videos they are great
Ive just done a walking stick using the same system but the tools burn the wood, its a hard wood `im using though.
Got to say.. I love your videos. You have given me so much information, which has help me have the confidence to try my first carving.. Thank you so much.. Keep up your wonderful videos. I appreciate them all.
Hey brother - Thanks for all of the videos. You're an epic teacher and I appreciate that you took the time to make these! Throwing a wood spirit on the handle of a spoon I made...harder to get em small tho! All the best dude
Awesome ty
Hi from Hawaii
Awesome hello back from canada
Hello I was wondering where you get your dreams that take the qt inch shafts or the larger kutall tips?
What diameter do you suggest for carving? This one looks fairly large. Others look smaller. How large was this one and what is the smallest you suggest?
Any size u want
Hey Jordy, what’s a good Fordem tool for a beginner? Thanks in advance. Yupik do super nice work!!!
Ty, forwdom sr series
@@CarvingFusion thank you👍
Thank you
Made my first wood spirit yeah it's cute
Work space looks good
Any advice for those that really can’t draw? Are there effective ways to trace on to wood anything?
Yes use carbon paper to trace on
Best how to video. Thank you
Love your videos Jordy, keep them coming 😁. I just did my first wood spirit 😍
Awesone thank u , keep at it
⭐️🇨🇦⭐️🇨🇦⭐️🇨🇦⭐️🇨🇦⭐️
Nice video's, just carving my first spirit.... greetz from Holland...... lars
Well done man, dandy looking spirit.
Jordy gets an auto-like :)
Thanks bob
Muito bom ! 👏👏👏
Favor de describir que tipo de madera usas o que otras.graciasPlease describe what type of wood you use, thank you
I believe this carving is birch wood
How long are them cutzall burs good for?
Long time
Draw on the right side first as it's easy to copy on the left that what l have found out over the years
Why not the left side first
Like to send you some pictures of my attempt but can’t quite figure out how I can do that on your website or TH-cam channel😅
Canadian1dude@gmail.com
I have a bunch of logs but no way to cut them in half like this. How do you do it?
WEDGES and a hammer
I am learning from you and still waiting for my kutsaw burr to come in mail trying to follow you but using lame dremel burrs But thank you I would send you a pick of my first one so far without the right burrs but not sure if you read or respond
Canadian1dude@gmail.com
Looking in to a Dremel for my wife to start in carving. What's a good model to start with?
Dremel 4000 with the flex shaft
Carving Fusion By : Jordy Johnson Thanks for the quick response. I haven't seen it in person yet, but it seems best value for money. However, I was thinking it could be a bit too big to handle on more delicate work. The 3000 seems a bit more pen-like and lighter but I could be completely wrong.
Does the 4000 give a pen-like feeling? Would it be too heavy (considering a average size / strength woman)?
Thanks again
@@calembur the flex shaft for dremel is all the same handpiece, so dont make a diffrence if 4000 -3000 :)
Carving Fusion By : Jordy Johnson A-ha... Now I understand. I hadn't realized there was a separate, flexible shaft. That's really cool. I'm totally new to Dremel. Thanks a lot. Now I know what to get. I think we're going to have a lot to do this weekend.. :-)
@@calembur there is a link to one in my amazon under my newer videos, not trying to push it on u lol or just look on amazon! U REALLY NEED THE FLEX SHAFT, ITS A GAME CHANGER
اذكار
Can some one tell me where I can buy a new inner cable for a Dremel Fortiflex!
Thank you
Andy
Call dremel they will hook u up
@@CarvingFusion
Tried that! they say they don’t stick inners and that I have to purchase the whole flecidrive😩
Is there any of the other Dremel inners would fit? For example the 4000?
If I can’t get one the machine is scrap as I’m not going to pay for a new Flexshsft every time I break an inner😡
Thanks for your reply!
Yes as far as I can remember the normal dremel inter shaft do fit
assuming that carving a palm tree would be done the same way, probably easier correct
Yup
the palm m trying this on is very fibrous and and dosent seem to carve well at all, maybe its the cheap burr Im using ??
Hi
Love your carvings just inspiring!!
Found this video a bit difficult to watch, I think you were onto it, the light was a bit too bright.
Keep up the awesome work... waiting on my first Dremel to be delivered, can't wait to try my first ever wood carving, thanks to you!!
Peace out from Scotland!
Yes I knew was aware of lighting and it's because the wood is white
:)
So good
Great video thank you
Hey Jordy where is the video for building a vac dust collection sys
In my youtube playlists
I can't wait to start.... and you will be the FIRST to see it 😁
Awesome pam I cant wait !! Good luck and remember the deeper you carve the better it will look
Thanks.... as I said.... you will be the first to see my FIRST SPIRIT....
I have been carving (just an little bit) with my new KUTZALL BURRS this afternoon but it wasn't a SPIRIT... it was a SKULL that I started quite a while back...
Just to TRY out the burrs... they work well...
I only tried the 1/8 not the 1/4
Hi Jordy , can you tell me what vacuum system you use? Thanks
Hey there I have a video in my playlists about how my table works
Eu quero uma fresa assim onde eu encontro uma que talha a madeira. Qual o nome
Where do you get your bits ?
Kutzall
Maple 🍁 dude.
Old show Jordy, ,but I didn't want to be disrespectful on your tribute cast for George. I tried unsuccessfully to find a way to reach you in pm. So I'm doing here. Over the last two months I have been watching your cast and enjoyed the atmosphere. I did pick up many useful tips and technics thank you.. You provid a good distraction from the hackers and trolls who magically appeared on every site I I paused on. And your subtle manner allowed me to completely miss that you are part of this as well. Not to place all the disappointment I have in the behavior of adults everywhere on your shoulders. ( I'm not) but I expected a bit more from someone who has had their own trials and struggles than to join with the mob mentality that what they are doing to a fellow human being. Is perfectly fine. And okay. Please stop talking about how you are there to help people, unless it is something that you really truly do because a joke is only funny when everyone can laugh at it.
( Oooo) nice wood spirits Jordy.
✌
Maestro , porque no coloca subtítulos en español, que pesar, no le entiendo nada
Un abrazo grande desde Colombia
Do you have a email I could correspond with you with pics and your advise ??
Can u add photo here?
Canadian1dude@gmail.com and put ur name on the pics please
hello friendsss
which
tree ?? walnut or ???
?
Tree ???
which wood do you use?
нахрена тебе тату