Ummmm u literally made my night and my giant loaches night! Shoot, you made our whole week and year! I was getting so pissed off tonight. Seriously appreciate you more than you know! A lifesaverrr
The most help and also understanding of how it works now. I just made sure the valve was closed as I filled the intake and then opened it and voila! You’re a life saver it’s been days of trying to get it to prime. The primer is essentially useless even though I replaced ut
Thank you so much, my primer got stuck so I might need to order a replacement or get some lubricant for it. I didn’t think it would actually work, but I’m hoping I don’t get any diseases from the water that just entered my system because I accidentally swallowed some.😢
Thank you heaps for your vid! Going to try this on my canister filter... I have been having trouble getting all the air out of the canister and it's been a bit noisy ❤
No need to use mouth.Fill the tube with water, then plug in back into the canister. It will start flowing. Unfortunately for me, the canister did not seal properly and it was gushing out the top. I did not moisten the gasket as advised, but the gasket was properly installed (per Petco employee who has three of these units). Frustrated I am running my new setup with an over the tank Marineland filter that is 30 years old. I used a gravel vacuum. So I will try again before returning.
![Fluval 306 [Priming Fix/Teardown]](http://i.ytimg.com/vi/h3xGLpJe5As/mqdefault.jpg)
Wow. Lifesaver. Thank you for posting this. I was about to toss the 407 out when the priming pump plunger snapped off.
Seriously, thank you you just saved me $15-$20
Now that you have taught me to manually prime my canister filter. My day is going great! Thanks for the lesson. 😊
Ummmm u literally made my night and my giant loaches night! Shoot, you made our whole week and year! I was getting so pissed off tonight. Seriously appreciate you more than you know! A lifesaverrr
The most help and also understanding of how it works now. I just made sure the valve was closed as I filled the intake and then opened it and voila! You’re a life saver it’s been days of trying to get it to prime. The primer is essentially useless even though I replaced ut
Thank you, broken primer tip saved me tonight
Thank you so much, my primer got stuck so I might need to order a replacement or get some lubricant for it. I didn’t think it would actually work, but I’m hoping I don’t get any diseases from the water that just entered my system because I accidentally swallowed some.😢
Thank you heaps for your vid! Going to try this on my canister filter... I have been having trouble getting all the air out of the canister and it's been a bit noisy ❤
This actually worked 😊 Thank You.
This worked Thank you so much the end part is the one that finally got it to work
had to do this today..... yes i got a mouthful
No need to use mouth.Fill the tube with water, then plug in back into the canister. It will start flowing. Unfortunately for me, the canister did not seal properly and it was gushing out the top. I did not moisten the gasket as advised, but the gasket was properly installed (per Petco employee who has three of these units). Frustrated I am running my new setup with an over the tank Marineland filter that is 30 years old. I used a gravel vacuum.
So I will try again before returning.
Very good!👍
I messed up and plugged in my filter too soon. It is now making a lot of noise in the canister. I unplugged it.
Hi do3s anyonr know if the 307 impeller fits the 306
Tried all this and still not pumping :(
🤮🤮🤮 it worked! Now using mouth wash
I have this problem with a brand new Fluval 307
Same. Been trying to get it started for an hour now. Never had this problem with any other filter. Brand new out the box.