Thank you - I've been looking at pre-made pot rings but they're expensive and would take a while to arrive; I already have some wire and a stack of pots so am really looking forward to getting going with this straight away : D
Hello -this is a great but simple design. What gauge wire do you use? I have noticed in a lot of comments, others have asked you the same question and you respond "it's in the video description"' but I cannot see any video description...!!! Would you be able to answer the question without the redirection ??
Hi. Below is a copy paste part of the original description. ‘Fencing Line Wire galvanised green PVC coated were used in this video. ~ 3.3mm. 12 gauge steel (2.5mm). Suitable for light weight plastic pots. Thicker wire and improved shape can be used for heavier pots.’ It is all relative. Depends on your situation, weight of your pots (with water saturated soil) and plants, type of wire available to you. This was one-off DIY project that worked for me. Posted as an idea for others to develop or discard it. In theory you can bend a rebar to this shape to hold quite heavy pots. But it won’t be visually pleasing.
Hi. Thank you for your interest. This is just an idea that I wanted to share with others. I can’t comment on other options as I’ve never tried any. Well, I feel I need to. When you face a problem you need to take different approach. Try to use pliers to bend the wire? Let me know if you can. I don’t have any wire hangers to play with.
God's heart you! Can also use the wire or suspension ceilings that they sell at Lowe's or Home Depot. Rick's orchids on TH-cam shows you also how to make a plant hanger but also has a way to have a piece of wire coming up in the middle of the pot to tie a flower Spike on to and that's the kind of wire he uses
That’s 12 gauge wire under that PVC coating? I’m using smaller wire - 14 gauge galvanized steel wire and I needed a bolt cutter to cut it and needed a lot more force to do all the bends. Maybe I’m just a wimpy girl.
There are different types of wire (like anything else). It depends on your locality. I gave the measurements from my order. You’ll give it a try with what you have. You’ll try with something different. You’ll try again and again, and again. And here you go. You’ve nailed it. Or... you’ve got something new!
![[UNCUT] บอสพอล แผลงฤทธิ์ บอสพระ-นักร้อง ก. โดนแฉยับ! I คนดังนั่งเคลียร์ I 21 ต.ค. 67](http://i.ytimg.com/vi/XKf6HeftoPI/mqdefault.jpg)
Perfect! Man. Cheers! I needed plant wall hangers and at the same time I can get rid of the hangers I receive with dry cleaned clothes.
You are welcome. I hope it works for you.
it's exactly what I need for my fence pots. geat idea!
Thank you - I've been looking at pre-made pot rings but they're expensive and would take a while to arrive; I already have some wire and a stack of pots so am really looking forward to getting going with this straight away : D
Thank you for this video! I made a few of this from wire hangers and are so steady!
I need to test wire hangers as it seems like an option to many viewers.
Wow...Idea 😊👍
oh man....! thats what am looking for for my Orchid gurls......, you made it so easy for me.... Thank you
I recently made pot holder from wire but i made them wrong. This video solved my problem. Thanks man!
Great idea! Thanks for this vid
Good idea.Which wire u hv used for making ?
now I know what do do with my old coat hangers....done!!!
I’m not sure that will work... 🙂
Did it work with clothes hanger??? It seems too stiff to work let me know
Ingenious...so simple and effective
Thank you for your helpful video man😉 really appreciate
What gauge/size wire would you recommend for medium weight pots? I’m trying to hang a couple 4 inch plants in ceramic pots
Great idea and an amazing video very informative thank you! Keep up the great work new subscriber here!
Perfect 🎉
Thank you
maravillosa idea gracias por compartirla saludos.......
Great idea! Thanks for sharing this! I wonder if you could figure out how to hang plant pots from overhead using a similar technique?
Hello. I think one can figure out anything 🙂. Give it a go.
Can you tell me what gauge wire this is and where you found it? Thanks!
Hi. Video description.
Where did you buy the wires?
Hello -this is a great but simple design. What gauge wire do you use? I have noticed in a lot of comments, others have asked you the same question and you respond "it's in the video description"' but I cannot see any video description...!!! Would you be able to answer the question without the redirection ??
Hi. Below is a copy paste part of the original description.
‘Fencing Line Wire galvanised green PVC coated were used in this video. ~ 3.3mm. 12 gauge steel (2.5mm). Suitable for light weight plastic pots. Thicker wire and improved shape can be used for heavier pots.’
It is all relative. Depends on your situation, weight of your pots (with water saturated soil) and plants, type of wire available to you. This was one-off DIY project that worked for me. Posted as an idea for others to develop or discard it. In theory you can bend a rebar to this shape to hold quite heavy pots. But it won’t be visually pleasing.
That's great thank you 👍🏻
What type wire I sd ask on hardware shop? What gauze size is this?
Do you think 10 gauge copper wire would work? I tried a hanger and found it way to hard to make precise bends. Thanks
Hi. Thank you for your interest. This is just an idea that I wanted to share with others. I can’t comment on other options as I’ve never tried any. Well, I feel I need to. When you face a problem you need to take different approach. Try to use pliers to bend the wire? Let me know if you can. I don’t have any wire hangers to play with.
Cool! Thank you very much:)
You are welcome :)
Thanks
For heavy pots like 50kg or less how much thick wire should be used ?
For pots like 50 kg you’ll need some drawings and a welder.
What type of wire you used sir?
Hi. It is all in video description.
Where can I find the wire? Thanks
Hi. Local store or online. Other option - be creative.
God's heart you! Can also use the wire or suspension ceilings that they sell at Lowe's or Home Depot. Rick's orchids on TH-cam shows you also how to make a plant hanger but also has a way to have a piece of wire coming up in the middle of the pot to tie a flower Spike on to and that's the kind of wire he uses
woww
hey nice
Thank you.
Does this work with wire hangers ?
Well, I need to give it a try to tell.
That’s 12 gauge wire under that PVC coating? I’m using smaller wire - 14 gauge galvanized steel wire and I needed a bolt cutter to cut it and needed a lot more force to do all the bends. Maybe I’m just a wimpy girl.
There are different types of wire (like anything else). It depends on your locality. I gave the measurements from my order. You’ll give it a try with what you have. You’ll try with something different. You’ll try again and again, and again. And here you go. You’ve nailed it. Or... you’ve got something new!