DIY : Easy way to hide your dashcam wire perfectly! (without open A-pillar)
ฝัง
- เผยแพร่เมื่อ 4 ต.ค. 2024
- #diy #installdashcam #dashcaminstallation #dashcam
Hello, today i am gonna show you an easy way to hide your dashcam wiring, no more hanging wire in the middle!
Looking for a budget dash cam? Check out the comparison of Mai70 & Yi dashcam quality here:
• Dashcam : Xiao Mi 70ma...
Car manufacturers should just provide a USB port at the back of the rear view mirror. Should be easy to do.
I think that’s the right way to do it. Other tutorials show how to lay the cable behind the airbag cover. But that’s very dangerous I guess. Thank you for this video!
Very well, I agre with you too. This tutorial is easy to understand
blocking side curtain airbags, your car doesnt have the logo there but others that have side airbags should take note of this.
If side air bags don't deploy because of a wire a person probably doesn't want that car lol
My car doesn’t have the logo there, but i know it has airbags inside 20-30 cm down from the roof liner. It’s a part of the side curtain. This install would be very dangerous on every car with airbag in the a-pillar, as you said. You need to remove the trim and make sure the wire doesn’t interfere with the airbag. Or tuck it in between the trim and window👍
@@MrKjetil101 air bags should be about pressure. If a weightlessness cable prevents 100s of pounds of resistance and air bags from deploying...then, again the vehicle is not worth owning. Ask yourself, how much does a cable weight innately? Ounces to pounds. Stop the ignorance.
@@doritosmix73 It’s really not about the wires preventing the airbag from deploying, but it’s the fact that 100s of lbs of pressure from the airbag deployment can send this wire flying into your face and cause severe injuries. When routing these wires, it’s always best to remove the A pillar and run the wires above the airbag so if it deploys, you don’t get injured by the force of the wire flying out and potentially hitting your face or causing body injury. It’s certainly a potential risk that could cause severe injuries. Better to be safe than sorry.
@@dreamnight-mq1zg if airbags deploy the wires are going to go flying along with the a pillar material. Do you think air bags deploy and remain behind the housing?
Doesn’t make sense at all
Nope I'm trying to do it and it won't stay I have to use tape.
I scanned a qr code for this bs
have a question it’s there any app that is needed to download it for cell phones???
If these are the tools needed, why aren’t they included, even if you have to pay a little more 🤷♀️
Sorry I am way clueless about this and recently bought a car, while pushing the wires like this..is there any risk or chance of getting airbags getting deployed?
No it will not, unless the sensor detect strong impact on the car (front & back, side of door etc.). You can remove battery terminal before do it if worry.
@@junkitlow thanks mahn, I just fixed all wires and setup my dashcam, luckily I dint get any chance to see curtain airbags during the process😄
Where the cube camera go for the back how u hook that up
Some people just are not tech savvy.
Pay someone to install it for you......
@budcunningham6732 I'm a prof car audio installer. I'm pretty sure I know how to install a camera in a car but it's not blue tooth clearly so how does it connect if no wires. It don't because it's a bs scam
@maddmavic I have installed these also , and wifi isn't necessary.
I have one of these in my car .
Please define "professional " .
How did you get it from under the roof liner, behind the A pillar and through to the other side?
just slot it in the rubber
How many feet is that cable?
thank you! 🤗☁️
I hard wired my dash cam using an add a fuse but no power. The fuses are good, cable is brand new and wired up right. One to the fuse, one to ground. What am I doing wrong?
Try to check the fuse goes to which accessories?
Was wondering where I can get the tool ur using in this video ( the blue plastic thing )?
I don’t believe you need to use that specific tool , at least I am not planning to . It seems that you need to just get the wire under the headliner and that seem to be pretty easy
You can get various spudgers and other disassembly/repair tools like that from ifixit.
www.ifixit.com/Store/Tools
You don’t really need it!
Mine came with the camera.
Do you have any easy way to remove / uninstall it?
Worked like a charm
How do I get the chip out?😭
question did you download any app in your phone???
Where can I get that green cable!
Twist Tie Wire
shopee.com.my/product/167324543/11329124814?gad_source=1&gclid=Cj0KCQjwzZmwBhD8ARIsAH4v1gWGJJg1zt36_-XGr2S91PnnDFcvg-na28kK_1jZYXpo9tvslBZyCbIaAilGEALw_wcB
So this thing needs a cable run the full front to back from camera to camera for a reverse showing camera ?
yes
I did it by myself and it was easy and I'm a woman. Installing the rear dash is the same process.Its all about finessing the wire around your car where its not visible like shown in this video.
Brah what lmfao
Another video with the steering wheel on the wrong side.
Dash cams first became popular overseas, America is pretty late to the trend.
Awful tutorial, doesn’t tell you half of what you need to know.
E un po difficilino però
somebody explaining this bs would be better than this goofy ahh music
Complément NUL ...
this is easy because you don't have the eyesight
That looks complicated man, i will airtask it, no time for dat shit
You so cool
non ci ho capito na mazza😅😮😮😮