Great presentation, the instructor was very well together with his thoughts and knowledge on the mattress usage and functionality. He gave great points on patient needs especially when he mentioned about the “3 fingers” of the back and what to look for. Great choice of speaker. Thank you for this video.
I have a Meridian Ultracare 4253E pump and the “Power Fail” alarm will not stop alarming. I cannot find a manual online for it. Do you have any idea on why it’s alarming or a source for a manual?
Sorry we don't carry Meridian support surfaces. But most of the systems are similar. I would first power off and then power on the pump. Check for leaks in the mattress and kinked tubing. If the mattress and tubing is okay. Check for air flow out of the pump with the tubing disconnected. If there is air coming out of the pump. Check to see if there is a filter on the exterior of the pump. Usually more common on the bigger units, due to larger compressor and more air flow. If there is a filter, make sure clean. This can inhibit the pump from working correctly. Again filters are not on all systems. Hopefully this helps.
@@rafaelabrito8591 I was able to return the pump for another. Thankfully my wife no longer needed the bed after late June 2022. She was on hospice until then but recovered!!
My system is stuck on low pressure. I cannot get it to reset to static and normal pressure. Is this a motor issue? What's the best way to check for holes?
When mine was delivered, the person had never even set one up before and we put it on top of my original foam mattress. It was super high, so I lowered the bed. I also didn’t know that you’re not supposed to put sheets on it and was getting very frustrated because it’s impossible to put a bottom sheet on it without cutting holes into them so you can put the straps through. The outer layer is very weird to sleep on because it doesn’t feel like a fabric sheet. It will take some time to get used to. I also placed a layer of cardboard in between the mattress and the metal frame because the vinyl bottom layer seems pretty thin and each time I move the bed up or down the metal frame would rub on the vinyl. There was a small pocket on the side with plastic pieces in it. I have no idea what they’re even for. The vinyl pocket was the same material as the bottom of the mattress and it was already pulling apart the first day I got it but the rest of the mattress seems OK. Having the cardboard underneath it I think will definitely make it last longer. This is the only video I found that explained everything about the setup.
Sorry for the delay in responding. It should always be powered on to keep mattress inflated and to alternate cycles. Settings are adjusted to weight and sometimes cycle length or function depending on unit. This would include static, auto firm, alternating pressure and low air loss. Again, this depends on model of the unit.
We accidentally pulled the cpr tab on the mattress and it deflated with the resident in it. Will the mattress reinflate once the plugs are put back in? Theirs looks identical to this one but it is taking a long time
Yes it should inflate back to the original settings. Sometimes there is an auto inflate button to help with transfers. This button inflates mattress to firm and then defaults to original settings. If you don't have that function, the mattress can take a while to inflate. Keep in mind the size of the pump will determine how fast it will inflate also. Hope this helps.
I'm a Certified Nursing Assistant in geriatric nursing for thirty one years. I have always been taught that incontinent patients aren't supposed to use geri pads on these low loss air mattresses, due to overheating on their already compromised skin, and just use a draw sheet with a chux cloth pad. Is this practice still the standard, or has this changed? Thanks!
Hi! You're correct, the low air loss mattress cover is specially designed. It has moisture wicking properties, along with non-shearing for less friction. Also if it is a true low air loss mattress, it will help keep the user's skin dry with the forced air through the tiny holes in the air bladders. Thanks for the comment!
That particular pump is what we refer to as an alternating pressure support system. While one chamber fills with air, the other chamber deflates. So, yes the pump cycles between the two holes with air coming out of one hole at a time. Hope that answers your question!
Depending on the model, some do have a 3" underlayer to keep the user from bottoming out during a power failure. Most pressure relieving mattresses do deflate when there's a power failure. This is due to whether they're a true low air loss and the constant air forced through holes in the bladders to keep the skin dry. The other type would be an alternating pressure mattress. This pump will fill one bladder while deflating the other. This mattress is the most commonly used. They both require the pumps to be on to keep the air flowing, even when in static or auto firm mode. Best to check with your DME company supplying the equipment.
This was very informative. I do have a question. When my husband is out of the bed the bed pumps up and is fine. Once he gets in he sinks to the springs after a short period of time. He is only 130 lbs. He is a paraplegic and has an open wound on his bottom. This doesn't make any sense. Static is on. Can you please help us. I dont know if it is the mattress or the pump?
Hi Mary, What brand and model mattress do you have? Some require maintenance with filter cleaning on the pump. Other things to look at first would also be the cpr pull and make sure that it is secured tight.
My relative has not had a bed sore in her entire life. She goes into aged care on an air mattress and 5 days later she’s got a bed sore on her butt. It’s a very high quality air mattress. So much for air mattresses.
did you try to switch the mattress and see if that prevented sores? I ask because the care in most of those places is not very good and many tend to stay in bed which may have been a bigger contributer to the sore?
@@tex959 The medical care there is good. I got a foam mattress overlay for $30 and put it on the air mattress beneath the fitted sheet, she’s had no issues since then. The foam overlay is about 30 mm thick.
@@tex959 I got it from Target store here. You have Target stores I think. Or you could get it from any foam shop. It is not memory foam, it’s just simple open cell foam. Flat on one side with bumps on the other side. Looking online it looks like one your Target store would sell called 1.25 inch foam mattress topper - room essentials. About $25. You can cut it with scissors to suit the size you need.
That depends significantly on which mattress you're talking about. A true low air loss mattress has a large compressor and can inflate in minutes. An alternating one, or the simpler support surfaces can take much longer due to the smaller compressors. Thanks for the question!
🔴WARNING🔴 This is NOT a “LOW Air loss mattress!” This is an (intermittent air mattress). You WILL, “Bottom Out”, with this mattress, unless you are an 85 pound individual. This is false information!! You’ve been warned. Note: if you have a certain condition, like having wounds, make sure you ask your doctor to make sure the prescription accurately defines your medical necessity, and that you need a “TRUE, Hospital Grade, Low Air loss mattress! 🔴You’ve Been Warned🔴
Thank you! Just inflated my resident mattress and wasn't sure if static button should be activated
My residents mattress just deflated.. this was very helpful!! Thanks!🤗
Great to hear! You're welcome!
Thanks for posting this video. Nicely done.
You're welcome! Let us know if you have any other questions about our equipment.
i realize it's pretty randomly asking but does anybody know of a good website to stream newly released tv shows online?
@Tripp Justice lately I have been using flixzone. Just google for it =)
Great presentation, the instructor was very well together with his thoughts and knowledge on the mattress usage and functionality. He gave great points on patient needs especially when he mentioned about the “3 fingers” of the back and what to look for. Great choice of speaker. Thank you for this video.
Thank you
THANK YOU VERY MUCH
You're welcome! Please reach out if you need any other information about the equipment.
I have a Meridian Ultracare 4253E pump and the “Power Fail” alarm will not stop alarming. I cannot find a manual online for it. Do you have any idea on why it’s alarming or a source for a manual?
Sorry we don't carry Meridian support surfaces. But most of the systems are similar. I would first power off and then power on the pump. Check for leaks in the mattress and kinked tubing. If the mattress and tubing is okay. Check for air flow out of the pump with the tubing disconnected. If there is air coming out of the pump. Check to see if there is a filter on the exterior of the pump. Usually more common on the bigger units, due to larger compressor and more air flow. If there is a filter, make sure clean. This can inhibit the pump from working correctly. Again filters are not on all systems. Hopefully this helps.
See if you can call the manufacturer or TH-cam instructions I hope my suggestion was useful
@@rafaelabrito8591 I was able to return the pump for another. Thankfully my wife no longer needed the bed after late June 2022. She was on hospice until then but recovered!!
My system is stuck on low pressure. I cannot get it to reset to static and normal pressure. Is this a motor issue? What's the best way to check for holes?
When mine was delivered, the person had never even set one up before and we put it on top of my original foam mattress. It was super high, so I lowered the bed. I also didn’t know that you’re not supposed to put sheets on it and was getting very frustrated because it’s impossible to put a bottom sheet on it without cutting holes into them so you can put the straps through. The outer layer is very weird to sleep on because it doesn’t feel like a fabric sheet. It will take some time to get used to. I also placed a layer of cardboard in between the mattress and the metal frame because the vinyl bottom layer seems pretty thin and each time I move the bed up or down the metal frame would rub on the vinyl. There was a small pocket on the side with plastic pieces in it. I have no idea what they’re even for. The vinyl pocket was the same material as the bottom of the mattress and it was already pulling apart the first day I got it but the rest of the mattress seems OK. Having the cardboard underneath it I think will definitely make it last longer. This is the only video I found that explained everything about the setup.
This is not a “Low Air Loss Mattress. Trust me, I had to learn the hard way!
I am getting something Similar, only not as fancy as this. I'm getting something called a Vive Alternating pressure pad.
Great video! While the patient is on the mattress, does the machine stay on at all times? What setting should be on?
Sorry for the delay in responding. It should always be powered on to keep mattress inflated and to alternate cycles. Settings are adjusted to weight and sometimes cycle length or function depending on unit. This would include static, auto firm, alternating pressure and low air loss. Again, this depends on model of the unit.
We accidentally pulled the cpr tab on the mattress and it deflated with the resident in it. Will the mattress reinflate once the plugs are put back in? Theirs looks identical to this one but it is taking a long time
Yes it should inflate back to the original settings. Sometimes there is an auto inflate button to help with transfers. This button inflates mattress to firm and then defaults to original settings. If you don't have that function, the mattress can take a while to inflate. Keep in mind the size of the pump will determine how fast it will inflate also. Hope this helps.
I'm a Certified Nursing Assistant in geriatric nursing for thirty one years. I have always been taught that incontinent patients aren't supposed to use geri pads on these low loss air mattresses, due to overheating on their already compromised skin, and just use a draw sheet with a chux cloth pad. Is this practice still the standard, or has this changed? Thanks!
Hi!
You're correct, the low air loss mattress cover is specially designed. It has moisture wicking properties, along with non-shearing for less friction. Also if it is a true low air loss mattress, it will help keep the user's skin dry with the forced air through the tiny holes in the air bladders.
Thanks for the comment!
Hi and thanks for the video, When unplugging the mattress from the motor, should there be air coming out of both holes of the motor?
That particular pump is what we refer to as an alternating pressure support system. While one chamber fills with air, the other chamber deflates. So, yes the pump cycles between the two holes with air coming out of one hole at a time. Hope that answers your question!
@@bayviewhomecare213 thank you for responding and answering
I have the manual but it doesn't say anything about power outage will mattress deflate? My son is a paraplegic man? I would appreciate a response..
Depending on the model, some do have a 3" underlayer to keep the user from bottoming out during a power failure. Most pressure relieving mattresses do deflate when there's a power failure. This is due to whether they're a true low air loss and the constant air forced through holes in the bladders to keep the skin dry. The other type would be an alternating pressure mattress. This pump will fill one bladder while deflating the other. This mattress is the most commonly used. They both require the pumps to be on to keep the air flowing, even when in static or auto firm mode. Best to check with your DME company supplying the equipment.
Yes it will deflate!!
This was very informative. I do have a question. When my husband is out of the bed the bed pumps up and is fine. Once he gets in he sinks to the springs after a short period of time. He is only 130 lbs. He is a paraplegic and has an open wound on his bottom. This doesn't make any sense. Static is on. Can you please help us. I dont know if it is the mattress or the pump?
Hi Mary,
What brand and model mattress do you have? Some require maintenance with filter cleaning on the pump. Other things to look at first would also be the cpr pull and make sure that it is secured tight.
You need to get a TRUE Low Air loss mattress. This guy is wrong, saying this is one.
My relative has not had a bed sore in her entire life. She goes into aged care on an air mattress and 5 days later she’s got a bed sore on her butt. It’s a very high quality air mattress. So much for air mattresses.
did you try to switch the mattress and see if that prevented sores? I ask because the care in most of those places is not very good and many tend to stay in bed which may have been a bigger contributer to the sore?
@@tex959 The medical care there is good. I got a foam mattress overlay for $30 and put it on the air mattress beneath the fitted sheet, she’s had no issues since then. The foam overlay is about 30 mm thick.
@@aussie8114 Thanks for your reply!! an specific brand of foam overlay.. Not sure If I can get the same brand, here in the states.
@@tex959 I got it from Target store here. You have Target stores I think. Or you could get it from any foam shop. It is not memory foam, it’s just simple open cell foam. Flat on one side with bumps on the other side. Looking online it looks like one your Target store would sell called 1.25 inch foam mattress topper - room essentials. About $25. You can cut it with scissors to suit the size you need.
@@aussie8114 Thanks for all the help!
How long does it take once you turn the pump on for the mattress to fill?
That depends significantly on which mattress you're talking about. A true low air loss mattress has a large compressor and can inflate in minutes. An alternating one, or the simpler support surfaces can take much longer due to the smaller compressors. Thanks for the question!
Do you have to leave on all night as the patient sleeps. Once the mattress is inflated?
Thank you for your inquiry. Yes, you do need to keep the pump on all night while in use.
🔴WARNING🔴 This is NOT a “LOW Air loss mattress!” This is an (intermittent air mattress). You WILL, “Bottom Out”, with this mattress, unless you are an 85 pound individual. This is false information!! You’ve been warned. Note: if you have a certain condition, like having wounds, make sure you ask your doctor to make sure the prescription accurately defines your medical necessity, and that you need a “TRUE, Hospital Grade, Low Air loss mattress! 🔴You’ve Been Warned🔴
every other tube means one-on-one off one-on-one off .I wish you'd be more clear about that I think what you're really saying is every tube
A CLOSE-UP of the steps SHOULD HAVE BEEN SHOWN. NOT A GOOD VIDEO .
Sorry the video wasn't helpful to you. Try giving us a call for detailed steps!