i seen tito cuts try this and was impressed and as you showed the blend comes out great with this blade, because a sc still and moving blade are super thin, this combo is it
You're definitely under appreciated on youtube. Your content is always good and the cuts is fire. Your lever play is sick with the speed and accuracy. I spend more time adjusting my lever than you do on the cut.
@@TankBeChoppinwill the extra stretch bracket that comes with the clipper work, or do I have to purchase a different one in order to make the master blade fit on the clipper ?
I never used my rebels cuz I'm not a fan of the fusion blade so I threw an andis phat blade on them & they're amazing. Now I use them all the time. Same with the instincts, I don't really use them. I religiously use a taper blade for all my blending except for fading out the guide line I use a fade blade so no need for a fusion blade. Seeing you throw an andis taper blade on those instincts just brought new life to them. Now I gotta order one. Plus I've been dying to use my purple andis magnetics guards which I haven't used in 10 years. Thanks for puttn us on. And as always, amazing video.
@@TankBeChoppin what about the cam follower, does it work with the Andis master blade too or did you have to replace that. In order for the Andis Phat Masters blade to fit the Rebels I had to buy the modded cam follower from philthy blendz.
@@Ktbcuts it took me months to find one on ebay. And to be honest, I got lucky I found that one. It was about $150 but I'm ol school so I had to have it. If you find em online, clippers are going for about & 600-$700 & just the blades are going for about $300. And that's if you can find em.
Good video, I didn’t expect the blade change. Something different, it all depends on the guard system you’re used to and want to use for you to swap out the blade. I only use the .5 or 1.5 guards to blend as I use a detachable clipper in my cutting system. So the thinner blade out the box on these style craft blades are dope with the detachable guard system because of how tight the cut is on a detachable and makes the blending effortless. I been using the Alphas with a stretch bracket and thinking about copping these due to it being smaller and better motor. Barbers drop a comment if it’s a must 🫡
Yo tank! I noticed you using the click lever with the Andis guards. Since you dont have the extra throw on the lever, is the system the same as the Wahl guard system?
Thanks for making this video. I’m definitely going to get a pair and put the mod on it. I have gold magic clips and regular ones with the andis phat master and the andis taper blade but these stylecraft instinct have way more power and I think will do a better job and imitating the corded Andis Master
Yo tank when you say it come with the bracket already. Which I’ve heard from a few people. Is you taking about the stretch bracket they comes in box with the instincts? Will that work with master blade or do I have to cop the Philthy blend mod?
Wuss good bro man I misunderstood what blade you said and I took off the faper blade on the stylecraft instinct and tried to put on a phat master blade and didn't wasn't working at all but now I know that I should've had a master blade back to the drawing board.
I use the Andis blade on the xergo with the slim deep tooth blade from SC, best combination and has the power of the Andis Master Corded, absolutely love it
I did this same thing just last week straight game changer I love the ergo already and I wanted to see what the big deal with the andis blade was and man 🔥
I want to start by saying I love your videos. however, If you are reviewing a clipper for potential buyers, you have to use the clipper with the blade it comes with for an accurate review.
It's like this....TPOB GOBLIN has StyleCraft Instinct beat... their blade don't get hot like that gold blade StyleCraft uses...plus is almost $100 cheaper. Yea, TPOB GOBLIN don't come with stretch bracket and extra bodies but that's basically it! I'm a little upset I paid almost $300 for StyleCraft Instinct but happy I spent under $200 for TPOB GOBLIN! C'MON AMERICA WHAT'S REALLY GOING ON! Then their is a Gold and Black pair of clippers made like The Instinct and the GOBLIN but their $3000.00 wth.. they come from Spain... so yea my question is...who is really copying who? Aye yall Stay Blessed By The Best 🙏🏽💯
typical of a stylecrap/gamma product... u gotta spend for a blade swap (to another brand) to make the machine worth keeping... hard pass for me on anything from gamma/styletrash ...but on a positive note, always enjoy ur vids bro, thanx
buggin, sc gamma clipper got alit of power, the variety is there, you also got the saber that can last a whole day, andis refuses to make a quiet and improved master so this combo is perfect
The crunch on the instincts is ridiculous 🔥
Crunch is actually a blade thing
Crunchy black
@@d3arb0rns ayo
@@archiexEM they still have a crunch with the faper blade that it comes with
i seen tito cuts try this and was impressed and as you showed the blend comes out great with this blade, because a sc still and moving blade are super thin, this combo is it
You're definitely under appreciated on youtube. Your content is always good and the cuts is fire. Your lever play is sick with the speed and accuracy. I spend more time adjusting my lever than you do on the cut.
Lol I'm glad you appreciate the content Johny
Lever play is next to none
@@RyanAlca I'm confused by your wording. Are you saying there is very little lever play happening or no one does it better?
@@TankBeChoppinwill the extra stretch bracket that comes with the clipper work, or do I have to purchase a different one in order to make the master blade fit on the clipper ?
Couldn't wait for this Video! Let's Go
💎
I never used my rebels cuz I'm not a fan of the fusion blade so I threw an andis phat blade on them & they're amazing. Now I use them all the time. Same with the instincts, I don't really use them. I religiously use a taper blade for all my blending except for fading out the guide line I use a fade blade so no need for a fusion blade. Seeing you throw an andis taper blade on those instincts just brought new life to them. Now I gotta order one. Plus I've been dying to use my purple andis magnetics guards which I haven't used in 10 years. Thanks for puttn us on. And as always, amazing video.
Yessir. Luckily this clipper comes with the Philthy blends mod on it so you just need the blade and screws
@@TankBeChoppin what about the cam follower, does it work with the Andis master blade too or did you have to replace that. In order for the Andis Phat Masters blade to fit the Rebels I had to buy the modded cam follower from philthy blendz.
Wait, I believe you kept the same cutting blade from Stylecraft and only replaced the the fixed Stylecraft blade to a fixed Andis blade.
Where did you get that phat blade I can’t find one
@@Ktbcuts it took me months to find one on ebay. And to be honest, I got lucky I found that one. It was about $150 but I'm ol school so I had to have it. If you find em online, clippers are going for about & 600-$700 & just the blades are going for about $300. And that's if you can find em.
Did this soon as I got them in January... absolutely clean with fading, for me
Facts
Yes sir that’s what I use🔥🔥🔥…. I put away 4 pairs of masters!!!
Nice cut during your blend are you using the corner of the blade
Yes I do a lot of corner blending to get the look I'm lookin for
Good video, I didn’t expect the blade change. Something different, it all depends on the guard system you’re used to and want to use for you to swap out the blade. I only use the .5 or 1.5 guards to blend as I use a detachable clipper in my cutting system. So the thinner blade out the box on these style craft blades are dope with the detachable guard system because of how tight the cut is on a detachable and makes the blending effortless. I been using the Alphas with a stretch bracket and thinking about copping these due to it being smaller and better motor.
Barbers drop a comment if it’s a must 🫡
Every barber should be using the detachable blades. Its the cleanest and fastest wah
what blade you using for the cutting blade
Regular blade on the instincts
@@TankBeChoppinandis ceramic any better ?
on my SC Alpha i have the Andis Blade on it but i have the deep tooth gold cutting blade... they recommend it whenever using an Andis mod
did the blade got hot at any point?
I feel like the master blade is thicker so it didn't heat up
Yo tank! I noticed you using the click lever with the Andis guards. Since you dont have the extra throw on the lever, is the system the same as the Wahl guard system?
Yesssir. I have a 1.5 andis guard I use to connect the 1 to the 2. But I basically cut how I would if I used the wahl system
@@TankBeChoppin I appreciate the fast reply man keep doing yo thang! 🔥 im going to give this a try!
Wanted you opinion on the tpob phantom or gamm x ergo.
What does the clipper open too with the Philthy bracket? .5 or a 1?
It's a .5. Not the stretch bracket on here. Just the factory Philthy blends mod
Thank you
Might need to try that out I had the master blade on my mythics for a while.
This Thing is fire with that blade man
I wish i knew how to install the INS2 motor inside of a cordless master
Can I use Wahl or Stylecraft guards?
Yes any guards except andis
Does the Gamma+ Taper blade also work?
Can you do a comparison with these vs the new andis master and senior mods?
Thanks for making this video. I’m definitely going to get a pair and put the mod on it. I have gold magic clips and regular ones with the andis phat master and the andis taper blade but these stylecraft instinct have way more power and I think will do a better job and imitating the corded Andis Master
It already comes with the cracked. Just need the blade 👍🏽
Yo tank when you say it come with the bracket already. Which I’ve heard from a few people. Is you taking about the stretch bracket they comes in box with the instincts? Will that work with master blade or do I have to cop the Philthy blend mod?
Does this leave behind any hairs ? Or does this work better than the original black diamond blade it comes with ?
you thin it will fit the phat master blade ?
does the lever click bro?
It does
Is it the master taper or fade blade?
When you put the master blade on there do you put the andis cutting blade too or do you leave the instinct cutting blade
What cutting blade do you have on these.
The instinct blade
Hey tank what mod is this. Can you do a tutorial on how to put it on
Yo are these as loud as they sound in the video or equivalent to the first cordless Master noises?
I’ll be honest tank I was questioning ya fading then I seen you downfade buddy with the locs 8:19 not a lot of folks can do that that’s fire
💪🏽
A year later and I still believe this is the best clipper and the best mod overall.
Link to the blade ?
Great content! Do you have the andis bottom blade on it ?
Looks like it’s doing a great job!
For sure
tank keep it ah buck bro , im on the fence about these instincts , i want them but i keep hearing they get hot quick , yes or no ?
I changed the blade. Don’t have that issue with the Master blade since it’s thicker
@@TankBeChoppin1❤bro
Dope Vid Bro💪🏿💪🏿💪🏿 Fades HELLA BLURRY
Thanks will 💪🏽
Are you using the regular stretch bracket that comes with the instinct? And are you using the andis cutting blade, or the style craft cutting blade?
Regular bracket and only top blade
No stretch bracket
@@jamesmarshall4490 how can he skips guards then?
Corner blending. This guard system is slightly different
Instincts mod or Seniors mod?
Wuss good bro man I misunderstood what blade you said and I took off the faper blade on the stylecraft instinct and tried to put on a phat master blade and didn't wasn't working at all but now I know that I should've had a master blade back to the drawing board.
so just a quick switch no extra brackets needed?..im a try this
Yes. Just need the blade and the screws
@@TankBeChoppin bet thanks bruh!.
My screws from my masters doesn’t keep the blade down.
@@mrkwik01 run the screws into the bracket 1st all the way that will help
@@desmondmitchell5602 I’ll do that when I get to work and see if it helps.
Where did u get that hoodie faM
Frontlab Clothing
I just wish they made better guard for the master blades
I love the purple guards
Bro can u plz do a review on the new andis master with the updated logo?
It's rare I'll use andis again. But if I can find one I got you
Man that's better than regular blade
To some yes
I may have to take barbering serious after this video
Why do you need to filthy blend mud? It comes with the two sets of holes for the Andis Master blade already!!!
That is the Philthy mod lol
Idk if it’s your camera or something but all your clients look like they all have really difficult hair to cut😂
My clients do have difficult hair to cut lol 😂
That vector motor is strong 💪 AF, almost a corded clipper. But cordless. So this a beast
@@TankBeChoppinyo tank, is Gamma staggered ceramic cutting blade compatible with d instinct clipper ?
@@TankBeChoppinyo tank,
Can a ceramic cutting blade fit on the instinct clipper ? Tx
I use the Andis blade on the xergo with the slim deep tooth blade from SC, best combination and has the power of the Andis Master Corded, absolutely love it
You put on the stretch bracket as well?
I did this same thing just last week straight game changer I love the ergo already and I wanted to see what the big deal with the andis blade was and man 🔥
I want to start by saying I love your videos. however, If you are reviewing a clipper for potential buyers, you have to use the clipper with the blade it comes with for an accurate review.
Please do a vid of doing to mod??
🔥🔥
🙏🏽
Tank what's good I like that hoodie you got on that's my man Hector's clothing label👍🏾💪🏾🎖️ fadex
Are you using also the moving blade or just the still blade from andis??
Just the still blade
Broo, try the master fade blade in the instinct, and let us knowwww
It's like this....TPOB GOBLIN has StyleCraft Instinct beat... their blade don't get hot like that gold blade StyleCraft uses...plus is almost $100 cheaper. Yea, TPOB GOBLIN don't come with stretch bracket and extra bodies but that's basically it! I'm a little upset I paid almost $300 for StyleCraft Instinct but happy I spent under $200 for TPOB GOBLIN! C'MON AMERICA WHAT'S REALLY GOING ON! Then their is a Gold and Black pair of clippers made like The Instinct and the GOBLIN but their $3000.00 wth.. they come from Spain... so yea my question is...who is really copying who? Aye yall Stay Blessed By The Best 🙏🏽💯
Frosty
That second client looks like a Dollar Tree Anthony Davis... lol
typical of a stylecrap/gamma product... u gotta spend for a blade swap (to another brand) to make the machine worth keeping... hard pass for me on anything from gamma/styletrash ...but on a positive note, always enjoy ur vids bro, thanx
The gamma boost is the truth
@@NookDaBarberthe mythic is also!!
To each his own bro thanks for watching
buggin, sc gamma clipper got alit of power, the variety is there, you also got the saber that can last a whole day, andis refuses to make a quiet and improved master so this combo is perfect
You’re bugging lmaooo people swap blades on clippers just to get the best of both worlds , don’t knock a solid clipper till you try it
That would be a nice collaboration
Thanks for watching