Put a Wahl cutting blade. I cut a couple of small pieces of a Ziploc bag to put in between the cam follower and Wahl ceramic cutter (just enought to cover the hole in the cutting blade) and bam...clicks with the stretch bracket
@@matthewblendztv doesn't change performance or sound. I don't notice any real difference. Just know when I say Wahl cutting blade I mean the senior not the stagger tooth magic clip one. I mean it might work but I haven't tried it...yet
I was wondering the same thing. His stretch bracket is useless. I mean he still gets to use the master blade but he can’t extend it past that fifth notch. You have to take that ball out and make it a floating lever.
@@s.craftblendz with the clicks and it opens up all the way without issues. The Wahl cam follower is basically the same but for some reason the gamma/Stylecraft is a couple thousandths smaller. I know it's bootleg but I cut two small rectangles of plastic from like a ziplock bag and put it between the cam follower and cutting blade to negate that small difference.
I have the stylecraft rebels. Do you know if that same mod would work with out the cutting blade getting caught in the groove of the master blade if fully open???
You have to use a floating lever or take the click mechanism off to use stretch bracket. The cutting blade will fall into the groove 100%
Put a Wahl cutting blade. I cut a couple of small pieces of a Ziploc bag to put in between the cam follower and Wahl ceramic cutter (just enought to cover the hole in the cutting blade) and bam...clicks with the stretch bracket
@@matthewblendztv doesn't change performance or sound. I don't notice any real difference. Just know when I say Wahl cutting blade I mean the senior not the stagger tooth magic clip one. I mean it might work but I haven't tried it...yet
@@matthewblendztv no problem. Hope you get the same results if not let me know.
@@sandman1133can d Gamma staggered ceramic cutting blade be slapped on d instinct clipper without a mod ? Please thanks
Where can I buy this stretch bracket bc it seems sold out everywhere.
Awesome Philty is a brother to me good dude was just chilling with him yesterday he’s a hard worker and always changing the game
Yeah, I like oh phil! Lol
I didnt even realize a lot of gammas clippers come with the philthy blendz mod already lol. Does the master blade get hot quickly?
Not at all, not on my S/C Insinct clipper. Love using the Andis double magnetic purple guards with this mod.
Very helpful i was always wondering if i can put the Andis blade I did it works amazing thank you.
No problem 👍
Link to the blade? And is the purple magnetic 0 guard the same as the .5 purple magnetic one ?
Thanks for the video! Was wondering how you kept the click with the stretch? I’ve had trouble with that
maybe he glue it
You’re welcome! I don’t know, never had a problem. Mine just seemed to work flawlessly
do i use the included stretch bracket? or does it already come with it under the faper blade?
I have a stylecraft instinct. Can I use a babyless blade on them ? Thanks
@S.Craft Blendz how are you getting the full benefit of the stretch bracket if you still have the clicks in on the lever?
I was wondering the same thing. His stretch bracket is useless. I mean he still gets to use the master blade but he can’t extend it past that fifth notch. You have to take that ball out and make it a floating lever.
Mine does fall into that groove. I had to do a little more modifying and actually put a Wahl cutting blade on mine
Do you use the click lever or you took the click off?
@@s.craftblendz with the clicks and it opens up all the way without issues. The Wahl cam follower is basically the same but for some reason the gamma/Stylecraft is a couple thousandths smaller. I know it's bootleg but I cut two small rectangles of plastic from like a ziplock bag and put it between the cam follower and cutting blade to negate that small difference.
Thoughts on which trimmer is better… stylecraft instinct or flex?
Please send me a link original master Blade thanks dear
I have the stylecraft rebels. Do you know if that same mod would work with out the cutting blade getting caught in the groove of the master blade if fully open???
I don’t think i had a problem with it on my rebels but can’t remember for sure
Is this the fade master blend with the new Andis logo ?
I have s/c rebel masters and they are my go to
S craft how low do u go on the top of your head? Is that a 1 or 1.5
I do a 1 blade so a lil shorter than a 1 guard.
Are you still using the Lo Pro Fx?
Glad ur back kid…💪🏻💪🏻💈💈
Thank you!
@@s.craftblendzplease can d Gamma staggered ceramic cutting blade fit on d instinct ?
Thanks bro
Tell I me tried to do this blade swap with Master blade but the holes just don't match up even when I buy mod kit it still don't work what's up
Do you have the bracket on it that has 4 holes? The two for the regular blades and the two in the my for the master blades? Should line up perfectly
@s.craftblendz730 yes it came with the instinct
Can I use Wahl or Stylecraft guards?
No
They still get hot quickly?
Blessings, my brother!!!
god bless you brother, praise the lord
Great video teaches me about modification
Glad to hear it!
when i open the lever all the way up it gets louder is there any tips on how to fix it?
I’d put the regular bracket on it. Sounds like you may have the stretch bracket on there
okay, thank you i appreciate it🤝🏾
Same thing, when the lever is fully open it gets louder and the blade is shifting :/
I’m coping thank you.
Cool! Hope you like them as much as i do!
🐐 🔥
Thank you!
The moving blade on this is trash I'm trying to find an actual mod for the moving blade to fit for the Masters or the wahl crunch blade
Thank you
Thanks to PhilthyBlendz
Got to have them... it was either the Fast Feeds or these. I think I'll go with SC with the Andis blade
I love them! I was a big fan of ff but i don’t really like the cordless ones for some reason
Can you add the fast feed blade to this instead of the andis blade?.
@@theambitiousbarberyes you just need a fast feed cam follower