Ali Express had this radio (from your link) showing at $15 black friday sale. I couldn't resist! I ordered it and the Ver 2.5 mod module, and am looking forward to following your instructions and doing the same mod.
@@OM0ET Brother, if I already have the other 27 MHz telescopic antenna with its connector that you show in the 2.0 modification video, can it be used with this board as well? I need an answer to make the purchase bro
@@OM0ET Brother, if I already have the other 27 MHz telescopic antenna with its connector that you show in the 2.0 modification video, can it be used the same with this board?
@OM0ET I bought the v5.0 SI4732 chip board. Could you make a video of how to install it with the second additional antenna, brother? I would really appreciate it.
I actually bought the kit a few weeks ago and it's the one in the video, and I also had bought the radio too, but I had also bought some of the UV-K5(8) radios with the intention to follow his second modification video. Now I'll be modifying the (99) version, and this is less messing around removing components too.
I do have this version of 2.5 ,i had not worked it out due to the diode toput it in or not until your video came out i think i will put it in on Saturday with a fresh mind to start the day thanks for the update .
A very interesting informative video. Wow, you do good work. The only problem I have with the video is that You Tube interjected so damn many commercials in this 46-minute video, my time hitting the skip button must have increased the video watch time by at least 10 more minutes.
Thanks! Oh I am sorry for those ads. They are added automatically by YT algorythm. I have purchase YT PREMIUM for €11 per month and there are no more ads in all videos i watch on YT. And also 4 more accounts of your family/friends you can invite too.
28:53 If you had 2 SMA connectors, you could have heated one, pulled it through and used the heat to melt the exact square shape you needed instead of trying to drill a square cutout. Just a thought...
Brother, if I already have the other 27 MHz telescopic antenna with its connector that you show in the 2.0 modification video, can it be used the same with this board?
my respect I have a question for you. Namely, I bought UV k5 (8) about a year and a half ago. in the first month everything worked perfectly. however, there was a problem with the display. Namely, pixels disappear, appear, get mixed up, basically navigation through the menu is more or less impossible. except for a couple of functions that can be done blindly. other than that the machine works perfectly fine. I tried to solve the problem myself however I didn't see any visual defect on the board. the flat cable between the board and the display is fine. I noticed that pressing my finger on the circuit board solves the problem for a short time. pressure must be applied to a specific place for the display to work. in the middle of the circuit board just above the buttons. I wonder if you might have encountered this problem? thanks in advance and regards
I damaged my display cable doing the older upgrade, its very easy to put a hairline crack in the ribbon, and fitted an aliexpress replacement easily. Backlight is a different colour, but now working perfectly.
Ahoj, kondiky su predpokladam pre modifikaciu, kedy sa nepouzivaju 2 antenne konektory ale povodny filter pre WFM co rozboci signal z originalneho antenneho konektora, kedy je kapacita filtra mala pre KV. Pri pouzivani s prutovymi antenami mi pride jeden konektor lepsi, KV antenu treba aj tak davat dole aby nerozladovala VHF UHF antenu. Pri antenach pripajanych koaxom je to samozrejme lepsie mat samostatne. Programovacie kable, pozor, uz aj Bohafnuk ma 2 druhy kablov s rovnakym konektorom. Jeden s TTL prevodnikom, to je ten co tu treba a druhy pre DMR radia, kde prechadza USB signal priamo na piny jackov.
UV-K5 is an extremely modifiable radio. Maybe it's time for the manufacturer to get a grip and release a new version with this chip, bigger flash etc. And besides, I think it's time to say bye to my old Kenwood TH-F7E. CEC firmware is the only one supporting this modification? Are there any other possibilities, modules for other firmwares etc.?
😄 well, there is one capacitor missing on the Mod.board. If you put there this capacitor HF signal from the main antenna (VHF/UHF) will come to the HF chip instead of external antenna input. But as default is thia capacitor missing.
@@mauriziolored6123 Difference between version 2.5 & version 5 is the way BGA427 LNA is done, the latter uses second application from datasheet and provides 22 dB of amplification, whereas ver 2.5 provides only 18.5 dB.
You can also use this little board to connect to an Arduino Nano and install the radio sketch on it and you don't even need the Quansheng UV-K5! Link to the Ver. 2.5 Modification Module doesn't work though.
Question, I have version 1 of that mod board. All I have done so far is I have removed and replaced the resistor, it came with the kit the one up by the display and the 8 pin ic chip. Will that interfere with the new v2.x? If I buy the new kit
First of all great video and thank you for this. Second having done a couple v2 and 1 v2.5 mod if you don't do much micro soldering then ask someone to do the mod for you. The 8 pads where the FM chip was are troublesome. Try and get that part of the pcb flat before you solder. I ended up having to jump some of them because they didn't have continuity.
Hi, I'm really like your work, thanks. I don't understand why in this version of hardware, all users remove 2 comments and replace 1 capasitor, and add 1 choke?
I have both uv-k5(8) and uv-k5(99). To tell the truth, k5(99) is more comfortable in hands and has less creaking of buttons. But that’s the only difference 😎
@OM0ET look at pin 6 on the si4732... the trace is clearly visible. That's how you get FM. Old modules used to combine these now they're broken out separate. Most people also remove the capacitors as they filter out FM bands
THIS IS NOT A WALKIE TALKIE, ITS A DREAM IN YOUR HANDS, I HAVE 4 OF THESE, BUT A BIT NEWER ONES, UVK6 I GUESS THEY ARE CALLED, WANTTO DO THE SAME, BBUT MAKE THE UPDATTES NOT ONE BUT MANY, EACH WOTH ONE MODE ;d
Ali Express had this radio (from your link) showing at $15 black friday sale. I couldn't resist! I ordered it and the Ver 2.5 mod module, and am looking forward to following your instructions and doing the same mod.
Well, hope will done it successfully and will enjoy it 😉👍
@@OM0ET Brother, if I already have the other 27 MHz telescopic antenna with its connector that you show in the 2.0 modification video, can it be used with this board as well? I need an answer to make the purchase bro
Once again, another excellent step-by-step video! Thank you Paul and 73!
Very welcome 😉👍
@@OM0ET Brother, if I already have the other 27 MHz telescopic antenna with its connector that you show in the 2.0 modification video, can it be used the same with this board?
@enmanueldeljesus3402 in ver.2 I used BNC, in ver.2.5 is SMA. If you buy BNC/SMA adapter so yes, why not.
@OM0ET I bought the v5.0 SI4732 chip board. Could you make a video of how to install it with the second additional antenna, brother? I would really appreciate it.
Thank you Paul. BTW, the mod is at Version 5.0 now, with Version 8.x on the way. 😁
I think i would need to buy four uv-k5 to get 1 to work . excellent tutorial .thanks .
th-cam.com/video/HM7SPsdPUJ8/w-d-xo.html
Perfect timing. I just ordered mine last night. Thank you!
The same with me :)
I actually bought the kit a few weeks ago and it's the one in the video, and I also had bought the radio too, but I had also bought some of the UV-K5(8) radios with the intention to follow his second modification video. Now I'll be modifying the (99) version, and this is less messing around removing components too.
Great! Good luck with your modification! 😉
I do have this version of 2.5 ,i had not worked it out due to the diode toput it in or not until your video came out i think i will put it in on Saturday with a fresh mind to start the day thanks for the update .
Excellent and professional video.
Congratulations ! 👍
Thank you very much! 😉
th-cam.com/video/HM7SPsdPUJ8/w-d-xo.html
Very good work Paul! The best from LB1NH. 🙂
Thank you dear Arild! 😉
A very interesting informative video. Wow, you do good work. The only problem I have with the video is that You Tube interjected so damn many commercials in this 46-minute video, my time hitting the skip button must have increased the video watch time by at least 10 more minutes.
Thanks! Oh I am sorry for those ads. They are added automatically by YT algorythm.
I have purchase YT PREMIUM for €11 per month and there are no more ads in all videos i watch on YT. And also 4 more accounts of your family/friends you can invite too.
28:53 If you had 2 SMA connectors, you could have heated one, pulled it through and used the heat to melt the exact square shape you needed instead of trying to drill a square cutout. Just a thought...
Great idea!! 😉👍 Thanks!
Brother, if I already have the other 27 MHz telescopic antenna with its connector that you show in the 2.0 modification video, can it be used the same with this board?
Would a hot glue work too?
Another great video Paul, thanks! Could the part that you didn't solder be a mounting point to give physical stability rather than an earth?
Thank you! Yes it is possible but this mark "G" on the FPC board confuse me because it suppose to be a Ground. 😉
my respect I have a question for you. Namely, I bought UV k5 (8) about a year and a half ago. in the first month everything worked perfectly. however, there was a problem with the display. Namely, pixels disappear, appear, get mixed up, basically navigation through the menu is more or less impossible. except for a couple of functions that can be done blindly. other than that the machine works perfectly fine. I tried to solve the problem myself however I didn't see any visual defect on the board. the flat cable between the board and the display is fine. I noticed that pressing my finger on the circuit board solves the problem for a short time. pressure must be applied to a specific place for the display to work. in the middle of the circuit board just above the buttons. I wonder if you might have encountered this problem? thanks in advance and regards
Hi, yes I recommend to unsolder the flat cable, clean/remove an old solder and re-solder it back on to motherboard. I am sure this will help. 😉
@OM0ET OK I'll try that. Thank you very much.
I damaged my display cable doing the older upgrade, its very easy to put a hairline crack in the ribbon, and fitted an aliexpress replacement easily. Backlight is a different colour, but now working perfectly.
Ahoj, kondiky su predpokladam pre modifikaciu, kedy sa nepouzivaju 2 antenne konektory ale povodny filter pre WFM co rozboci signal z originalneho antenneho konektora, kedy je kapacita filtra mala pre KV. Pri pouzivani s prutovymi antenami mi pride jeden konektor lepsi, KV antenu treba aj tak davat dole aby nerozladovala VHF UHF antenu. Pri antenach pripajanych koaxom je to samozrejme lepsie mat samostatne. Programovacie kable, pozor, uz aj Bohafnuk ma 2 druhy kablov s rovnakym konektorom. Jeden s TTL prevodnikom, to je ten co tu treba a druhy pre DMR radia, kde prechadza USB signal priamo na piny jackov.
Vďaka za info! 😉👍
UV-K5 is an extremely modifiable radio. Maybe it's time for the manufacturer to get a grip and release a new version with this chip, bigger flash etc. And besides, I think it's time to say bye to my old Kenwood TH-F7E.
CEC firmware is the only one supporting this modification? Are there any other possibilities, modules for other firmwares etc.?
I think also FAGCI REBORN has implemented driver for this RX chip, but I am not sure.
th-cam.com/video/HM7SPsdPUJ8/w-d-xo.html
Thanks Paul, my soldering idol. Am I correct that the sma connector doesn't need to be added? You can receive from the main antenna?
😄 well, there is one capacitor missing on the Mod.board. If you put there this capacitor HF signal from the main antenna (VHF/UHF) will come to the HF chip instead of external antenna input. But as default is thia capacitor missing.
@OM0ET Oh so good to know. Thanks Paul. Great video.
Is the bandwidth on AM mode now adjustable ?
Unfortunately not. I use CEC 0.5, not sure if it works in 0.51 vers. Probably also no.
The latest Bluetooth stereo transmitter version, one antenna, 2 antennas are fine th-cam.com/video/HM7SPsdPUJ8/w-d-xo.html
is tx available with is modification?
What' s difference between ver 2.5 and 5.0 module?
Already is ver. 8.3 of this board. It's called IOTCU 8.3
Thanks but what is the difference between 2.5-5.0 and 8.0?
@@mauriziolored6123 Difference between version 2.5 & version 5 is the way BGA427 LNA is done, the latter uses second application from datasheet and provides 22 dB of amplification, whereas ver 2.5 provides only 18.5 dB.
A newer version v5.0 is sold. Why didn't you install it?
Maybe topic of my next video?? 😉
You are always creative 🫶👍👍👍
You can also use this little board to connect to an Arduino Nano and install the radio sketch on it and you don't even need the Quansheng UV-K5! Link to the Ver. 2.5 Modification Module doesn't work though.
Great, im gonna try this.
Allready have the board
th-cam.com/video/HM7SPsdPUJ8/w-d-xo.html
th-cam.com/video/HM7SPsdPUJ8/w-d-xo.html
Question, I have version 1 of that mod board. All I have done so far is I have removed and replaced the resistor, it came with the kit the one up by the display and the 8 pin ic
chip. Will that interfere with the new v2.x? If I buy the new kit
Excellent Video, Thank you Paul for sharing this. 73
Glad you enjoyed it 😊👍
First of all, nice video, thank you very much. Secondly, will version 5 work as you explain in version 2.5?
Greetings from Spain
th-cam.com/video/HM7SPsdPUJ8/w-d-xo.html
First of all great video and thank you for this. Second having done a couple v2 and 1 v2.5 mod if you don't do much micro soldering then ask someone to do the mod for you. The 8 pads where the FM chip was are troublesome. Try and get that part of the pcb flat before you solder. I ended up having to jump some of them because they didn't have continuity.
Hi @om0et thanks for the vídeo. Can you explain us if the radio can transmite after all this modification?
th-cam.com/video/HM7SPsdPUJ8/w-d-xo.html
Hi, I'm really like your work, thanks. I don't understand why in this version of hardware, all users remove 2 comments and replace 1 capasitor, and add 1 choke?
th-cam.com/video/HM7SPsdPUJ8/w-d-xo.html
hello, I wonder if this firmware works with quangshengdoc?
I found the audio on HF is a bit low on my identical device when I compare to previous version .
If you connect "audio" pin to the same part as in the video, you should get loud audio.
Hi Paul. Great video. Just one question. Is it necessary to have this "face-lift" radio or it will work on old one? I have uvk6...
Thank you! 😊 No, all facelifts use the same type of motherboard so it is applicable to all models.
@OM0ET thanks
I have both uv-k5(8) and uv-k5(99). To tell the truth, k5(99) is more comfortable in hands and has less creaking of buttons. But that’s the only difference 😎
Cool video!👏👏
Great your Jobs
@12:20 that is completely wrong... otherwise why would you bother soldering the 8 pin?😂
Why? Also audio pin is not connected and therefore is an AUDIO plate marked externally.
@OM0ET look at pin 6 on the si4732... the trace is clearly visible. That's how you get FM. Old modules used to combine these now they're broken out separate. Most people also remove the capacitors as they filter out FM bands
Thanks!
👌
THIS IS NOT A WALKIE TALKIE, ITS A DREAM IN YOUR HANDS, I HAVE 4 OF THESE, BUT A BIT NEWER ONES, UVK6 I GUESS THEY ARE CALLED, WANTTO DO THE SAME, BBUT MAKE THE UPDATTES NOT ONE BUT MANY, EACH WOTH ONE MODE ;d
th-cam.com/video/HM7SPsdPUJ8/w-d-xo.html
Tnx 🎉
Why is such a device not commercially available?
Is not yet 😉
Is not yet 😉
Artificial Product Segmentation
I Know From Where You Got That Other Antenna, From The DeepSdr 101 Replica :D ! I Have The Same Oone :)
I have it from my Raddy Malahit DSP2 😉
@OM0ET ohh
Hello, i'am Rogério Reis, in the Brazil! I dont speak english. HF RX👍 TX???
225 polish radio 1
BUT Yoou Already Have Such Video Where You Mod This radio With Such Mod Man !
here he installed a newer version of the mod board, so not exactly the same
th-cam.com/video/HM7SPsdPUJ8/w-d-xo.html
The latest Bluetooth stereo transmitter version, one antenna, 2 antennas are fine
Presne tato pajeci kapalina se po zapajeni stane slusnou kyselinou a po case tu desku vyzere. Bacha na ni. Neutralni fakt neni.
73
Just wondering why the mfg foesnt include this in a new version ???