The dust is from an atomizer. You put powered flux in it and spray on the board it act's the same as putting alcohol on the board. You can see which bit turns to liquid, i.e., the hot spot, another great video 👍
25:47 you almost deemed it a no fix. It's so scary, if you didn't have eyes on the amp screen, you wouldn't have noticed it dropping to zero. Such a crucial detail.
Man, when a laptop has a dusty motherboard, before i check or assume anything, i can assume a short can be anywhere basically because dust can very likely contain conductive material, that's why i always first clean it and then check for actual shorts, you know, just in case.
Depends on cpu generation. If this laptop has an i3-5005 2ghz without turbo it's around 0.6 to 0.75V I5-8365U default: 0.65 on idle to around 1.275. I undervolt lot's of them with -150mv on core and -75 on cache, this gives a major improvement on them with i7-1165G7 performance.
Guys i just want remember you the top 1 video of all this channel. Where Sorin Reach the Max Level and unlock Frankenstein mod *Sorin Skill / Max *Sorin Knowledge / Max *Sorin Doogie / Max *Sorin pause smoking/ exploded the record th-cam.com/video/lwmUa99KUys/w-d-xo.html
Sir i had one doubt the technique you are using to find the short and applying the voltage with the power supply could we use it in any like desktop mother boards circuits etc..if possible please explain
You need to watch his videos and understand his method I don't think he or anyone else can explain it to you with a comment. It takes time but that's how you go. Suppose someone tells you it's fine still you need to know when and how and see it yourself to believe it !
you can use this technique almost anywhere ,to find the faulty(shorted) chip or component. Low voltage - 0.9-1 v and a bit of current will tell you where short is.
good eveening, please i have an hp 250 g6 laptop that can charge,3.3v is presence on the power button but can't turn. please how can i solve this problem?
I believe it is not very common for the LDO 3,3 power supply to fail. there are capacitors around this chip, I would check them all also, before replacing the actual chip. Something caused this chip to fail.
@@MattyEngland yeah I had to log into a VPN to gain access to the site and discord. Seems they dont accept business from the US. Hopefully they can make an exception if I pay upfront and send a little extra for the help
Hello mister, i have an issue with my laptop. İ have a hp 250 g5 laptop, 3 weeks ago while i was studying for my exam, it suddenly shut down with a click sound and it wont turned on. When i plugged in the charger the charhing led was blinking. Normally this wouldn't happen when it was charging, the light would come on solidly. Then, i press to power button, it opened for 1 second and went off immediately with the same click sound. İt was just like a fuse blown sound. When i press to the power button again nothing happened for this time. What should i do? Also this happened 1 week after my laptop came from repair and i dont know how should i tell this to my family im a university student and last repair was on the motherboard and it costed too expensive 😭😭😭😭😭😭😭😭😭
you want repair by yourself::;;!!fist check led of power supply if has does turn off when put in pc could be a short : check battery remove and try without ::try to charg battery manualy with two wire plus minus and so on in diagonstic
I can't help but remember some kind of meme where an women was selling her HP laptop but she read it upside down and said it was DY. HAHAHA I can't blame her and you can't also, everytime you see a HP laptop over the table closed when you face it before opening.
Who waiting New video every day from Sorin? 🎉
We all do , i feel like i found a gold mine, i hope that he never stops uploading videos
Daily dodginess 😂
Me are
I don't wait, but I like it when browse YT while eating and I find his new upload.
I am Waiting every day a new video from sorin last five years 🇧🇩🇧🇩🇧🇩
You the only tech I know that enjoys fixing and helping customers. Even after all these years you have the same excitement as if is your first repair.
The videos from Sorin are better than crime series on Netflix :-) Thanks
😄😄😄
I throw away my TV 🚮and only watch Sorin on PC💻⌨😃
My favorite phrase "We have picture! I can't believe."
Thermal Camera is the best friend of every repairman.
💯 imagine, how much time it saves !
33:47 We have the picture. I am very happy to hear you🤩
Sorin is the best teacher
The dust is from an atomizer. You put powered flux in it and spray on the board it act's the same as putting alcohol on the board. You can see which bit turns to liquid, i.e., the hot spot, another great video 👍
Never heard of a rosin atomizer before so it's true that you learn something new every day!!
Actually the dust would have melted from sorin using heat and it wouldn't be so sparkly. It's something else.
Thank You Sorin for sharing all your knowledge with us always wait for your new videos Hi from Chicago
25:47 you almost deemed it a no fix. It's so scary, if you didn't have eyes on the amp screen, you wouldn't have noticed it dropping to zero. Such a crucial detail.
you made mistake not calling your rosin ( Sorin Rosin) its so good name and its going together perfectly!
paypal in the description work great ! i send you $ for every video when you say "We Have Picture"
We have picture!!! I can't believe it!!! It's my favorite time
sorin, little by little - trying t get minimum tools to get going. thanks for the great videos.
It’s amazing to see how you do❤❤❤
Great job Sorin... as alaway thanl for the troubleshooting experience bye Francesco Timpano fron Florence Italy
Sorin your videos is just like coffee it is addicting.😊
Thank you and goodjob always
Man, when a laptop has a dusty motherboard, before i check or assume anything, i can assume a short can be anywhere basically because dust can very likely contain conductive material, that's why i always first clean it and then check for actual shorts, you know, just in case.
Using alcohol as a tool. Amazing! I'll keep that in mind next time.
great video! I think this is the first time we a see cpu power driver chip faulty if I'm not wrong.
Nice video 🙏🙏🙏. We are improving knowledge with you. Thanks very much.
hi sorin sir i have learn lots of things from you love you sir
Disco motherboard 🤩✨✨✨
Thank you Sorin 😘😘
thank you Mr Sorin
🎉 Nice work 🎉🎉. But how do you know the first chip that in older mother bored same with the burned chip?
Nice one master Power supply cpu driver is a rare fault.
Thanks🌹 for response
Wt beautifull case ❤❤❤ thermal camera play tha main role
So informative video ❤
king of electronic
when Sorin said cpu is cold and the vcore only 0.5, I knew something was wrong there
normal vcore for i7 should be around 1-1.2V
Depends on cpu generation.
If this laptop has an i3-5005 2ghz without turbo it's around 0.6 to 0.75V
I5-8365U default: 0.65 on idle to around 1.275. I undervolt lot's of them with -150mv on core and -75 on cache, this gives a major improvement on them with i7-1165G7 performance.
@@harrydijkstra9936 in this case it's i7
your my master lot things to learn
sometimes the older ones are the best ones!
Good job
Good job mate 👍
Another great lessons
Sorin: my knowledge is very OK.
Internet:
I will check soon but i think i have seen this on lenovo b590 motherboard and that 3.3v,5v ldo + 5v main chip might be tps51123
Very good sir
How to I join as students to you
U are the best.❤
WEEEE HAVE PICTUREEEEEEEEEEE, i cant believe xDDDD thats my fav music
Smooth to the groove 🕺🏼
what was the temperature when you do desolder and solder that chip @30:36
Guys i just want remember you the top 1 video of all this channel. Where Sorin Reach the Max Level and unlock Frankenstein mod
*Sorin Skill / Max
*Sorin Knowledge / Max
*Sorin Doogie / Max
*Sorin pause smoking/ exploded the record
th-cam.com/video/lwmUa99KUys/w-d-xo.html
Sir i had one doubt the technique you are using to find the short and applying the voltage with the power supply could we use it in any like desktop mother boards circuits etc..if possible please explain
You need to watch his videos and understand his method I don't think he or anyone else can explain it to you with a comment. It takes time but that's how you go. Suppose someone tells you it's fine still you need to know when and how and see it yourself to believe it !
you can use this technique almost anywhere ,to find the faulty(shorted) chip or component. Low voltage - 0.9-1 v and a bit of current will tell you where short is.
Check out "Learn Electronics Repair" where he presents fault-finding techniques to fix anything.
The glitter provoking a glitch In the matrix ; = )
We have picture. This is crazy. I can`t believe.
So schematics are also very important
Nice one
You are awesome
Can a laptop work without the PU2 chip?
👏👏👏👏👏👏👏👏👏👏👏 saludos desde Buenos Aires Argentina
Somos dos, abrazo grande!
Just a suggestion, but if you made your cursor black, we could follow it better on your computer.
You said this was a cheap job, but how cheap if the laptop is old?
we have picture i can't believe we help the customer
😊😊😊well done!😊😊😊
that dust could be metal dust
daca schimbi cip-ul nu se va strica si el ?
4:55 looks like there was an insulating tape over that area of the board to prevent what happened here. 😅
Some day i wish we get a not nice laptop to repair
i think many do
good eveening, please i have an hp 250 g6 laptop that can charge,3.3v is presence on the power button but can't turn. please how can i solve this problem?
I have a 250 g9 that's making a grinding sound and I have no idea what's causing it
Glitter Sorin
I only come here for 'picture'
I believe it is not very common for the LDO 3,3 power supply to fail. there are capacitors around this chip, I would check them all also, before replacing the actual chip. Something caused this chip to fail.
It's not so uncommon, even Sorin have many videos with them failed.
❤
35:23 Was this video made on September 4th
Bravo!!!!
... Now i want to fix my HP 250 G5
🤗
How do I contact you Sir. I tried the links in the description but they either dont work or take me to a dead page.
Discord
@@MattyEngland yeah I had to log into a VPN to gain access to the site and discord. Seems they dont accept business from the US. Hopefully they can make an exception if I pay upfront and send a little extra for the help
@@kryptodoozy I think sorin has had trouble with international jobs before, that's why he doesn't usually do them.
@@MattyEngland well I'm willing to pay for his services and for the shipping cost back to the US in advance.
Hello mister, i have an issue with my laptop. İ have a hp 250 g5 laptop, 3 weeks ago while i was studying for my exam, it suddenly shut down with a click sound and it wont turned on. When i plugged in the charger the charhing led was blinking. Normally this wouldn't happen when it was charging, the light would come on solidly. Then, i press to power button, it opened for 1 second and went off immediately with the same click sound. İt was just like a fuse blown sound. When i press to the power button again nothing happened for this time. What should i do? Also this happened 1 week after my laptop came from repair and i dont know how should i tell this to my family im a university student and last repair was on the motherboard and it costed too expensive 😭😭😭😭😭😭😭😭😭
you want repair by yourself::;;!!fist check led of power supply if has does turn off when put in pc could be a short : check battery remove and try without ::try to charg battery manualy with two wire plus minus and so on in diagonstic
Hey i bought an Asus Vivobook laptop it got onboard ram of 8gb(part name micron 4ATF51264HZ-3G2) but i want to make it 16gb is there any way plss help
I can't help but remember some kind of meme where an women was selling her HP laptop but she read it upside down and said it was DY.
HAHAHA
I can't blame her and you can't also, everytime you see a HP laptop over the table closed when you face it before opening.
16:24 I was screaming "Check if short is gone before you solder the new chip!" 😅
✌✌👌👌
the what chip is dead?
What percentage of "Computer Repair Shops" cannot repair a motherboard ? If I couldn't do it I would feel like a fake tech.
I'd guess more than 95%.
Dua lipa’s laptop
Glitter board
cmon its not old its still amazing fast laptop....
i always have those kind of reparations ffs xDDDDD
forums are not so popular anyway in those time when ppl want instantly response...
Hello🤝👍👍👍👍👍👍👏👏👏👏👏👏👋👋👋👋👋👋👋
Wow in standby it consumes less than 10mA.
😋 we have picturre
When i plug charger the touchpad freezing
Use original power adapter sir
Had that with an old adapter that had worn out capacitors producing noise on the laptops power rail causing the trackpad to react weird...
Please what happened to sorin and daina chanel.
Its still there. Search for Sorin&Diana
whaa, no dead capacitor 😄
N
Why i hate the ios system?
First
قمة الاثارة
ههههههههههه
If you cut it a little shorter, the videos will definitely be better received
Like a glitter 😅