1:20 gnun lng kadali tanggalin yung rod? eh bkit po yung sa amin ang tigas tpos squeaky yung sound kpg iniikot? naka ilang spray na aq ng dw40 at ilang lagay ng oil, pero ayaw kumalas.
You have fixed it wrongly. The rod should go inside the bucket and the plastic should on top that go into the rotating basket. That way rust will be prevented.
You don't know how much you have helped me, managed to fix mine
I used cooking oil. THANK YOU TONS.
It is helpful to you. Then subscribe my chanel👍
Nice video. Thank you for sharing
You hv shown very good explanation
Thank you very much
I am going to try
Thank You :)
Thanks a lot I have fixed it❤️❤️
Thanks alot my spinner now working well... Pehle dikkat hui thi Uske baad White part humne market mei welders shop se nikal ways now it's working..
Thank you so much our problem solved.
Thanks it was helpful
Pls subscribe
1:20 gnun lng kadali tanggalin yung rod? eh bkit po yung sa amin ang tigas tpos squeaky yung sound kpg iniikot? naka ilang spray na aq ng dw40 at ilang lagay ng oil, pero ayaw kumalas.
Hmare wo white Wala hisa nhi nekal rha
Mera bhi same problem hai
Tried cleaned yet did not spin the rod kept slipping...have to buy a new one
stickinte lock complaint ആയിപ്പോയി, അത് seriyaakkan എന്ത് ചെയ്യണം
എന്തു പറ്റി എന്ന് ഒരു വീഡിയോ അയച്ചാൽ നോകാം 9847932841
Yes
Good
Sir, mere mop ka vo chota rod ka white cover tuth gaya hai,to vo naya chota rod mil jayega , koi solution bataiye
Send a video 9847932841
Where can I get that rubber drain out stopper
Use a bottle cap and fix with glue
What spray you used? 01:05
WD 40
Thanks
I have the steel one
how can i remove the white part?
Pull the iron part and insert it in reverse
Which spray u had used
WD40
How to remove white part
No problem. Iron part remove and put it in reverse.
I couldn't remove the white part out. So hard to remove.. but thanks for the video..
Use WD 40 spray.
@@truecreater sure I will try that... but don't how to fetch it during lockdown..
So tha lasy way is to heat
@@truecreater I tried wd40. Yet I couldn't remove that white part from the rod..
No problem. Iron part remove and put it in reverse.
Thanks a lot but very low voice
As mentioned by others the white thingy doesn't come off. Even with wd40 etc.
Iron part inside in white part. Remove it and put it in reverse
Shouldn't you have cleaned all parts thoroughly to ensure cleanliness?
Mere me bhi ni nikl ra white part
Remove iron part. Then put in reverse. Uper side neeche. ( sorry mera hindi acha nahi)
Stick yengane ready akum bro
th-cam.com/video/R3RunHIoYJE/w-d-xo.html
Stick seriyakunna വീഡിയോ ലിങ്ക്
How Can I remove the white cap without the spray
So remove the iron part and put it in reverse
No problem. Iron part remove and put it in reverse.
You have fixed it wrongly. The rod should go inside the bucket and the plastic should on top that go into the rotating basket. That way rust will be prevented.
After one year my mop work perfectly.
Hindi bolo
Hindi malum nai. Iam from kerala
ചാനെൽ കൂടെ ഒന്ന് subscribe ചെയ്യാമോ. Pls subscribe this channel
Good