Could I get in contact with u on some platform I have a ga14 going into my micra and would appreciate any help greatly . Sprayed it and all like urself
@nismo Mies - I have a 2000 K11 (just before coil on plug) that is currently running with a 1.0. How much of a problem will it be to get a 1.6 running in it, given that it has a NATS system? What kind of issues might I expect, and how would you suggest I tackle them?
1.3l micra gearbox? also can you make pictures slower moving ? im looking into doing this my self, would like a list of things on what to change and how to , :) Love your work
Hey! Thanks for your comment! Yes it is 1.3 micra gearbox. I will try to make future videos better. You would need a complete car with that bigger engine, and wiring loom also. Micra wiring looms plugs are the same but it didn't work as it should with mine, so i would change the whole engine wiring loom from the car where the new engine came.
oh thanks for the answer :D i do have a 1.6 from a nx100 on the engine stand, a low milage one i was planing to prepare for the micra.. so i can use the wiring loom from a sunny 1.6 ?
Aahhh very goodie!
:') :')
Could I get in contact with u on some platform I have a ga14 going into my micra and would appreciate any help greatly . Sprayed it and all like urself
Do you remember where you got that manifold
I am starting I to a ga15 swap on my micra but I am using the 1.0 gearbox... Have you any updates on this build
How much fuel does yours use
@nismo Mies - I have a 2000 K11 (just before coil on plug) that is currently running with a 1.0. How much of a problem will it be to get a 1.6 running in it, given that it has a NATS system? What kind of issues might I expect, and how would you suggest I tackle them?
If you change wiring loom from 1.6 car it should not be a problem.
@@nismomies3099 Unfortunately, that chassis is long gone, and only the 1.6 engine itself remains.
1.3l micra gearbox?
also can you make pictures slower moving ?
im looking into doing this my self, would like a list of things on what to change and how to , :)
Love your work
Hey! Thanks for your comment! Yes it is 1.3 micra gearbox.
I will try to make future videos better. You would need a complete car with that bigger engine, and wiring loom also. Micra wiring looms plugs are the same but it didn't work as it should with mine, so i would change the whole engine wiring loom from the car where the new engine came.
oh thanks for the answer :D
i do have a 1.6 from a nx100 on the engine stand, a low milage one i was planing to prepare for the micra..
so i can use the wiring loom from a sunny 1.6 ?
yes.
Hi! I am making the same project and I have one problem. I am not able to eliminate the immobilizer. How did you do it???
My car didn't have immobilizer. Micra was 1994 and ecu I used was from a 1.6 Sunny which didn't have immobilizer.
@@nismomies3099 thanks for the answer!
I have installed the UC from a N14 but the red light turns on and the car doesn't start, why can it be?
What year is your micra? If its above 1995 its more difficult with the wiring loom with Nats (nissan antitheft system).
@@nismomies3099 it´s from 1996. thanks!
Hi! Great work! Would the ga16de also work with the 1.0 gearbox?
Yes it will work both 1.3 or 1.0 gearboxes.
@@nismomies3099 Thank you!
What engine i can get from nissan car to that can fit in a mirca with out to much work
I think the easiest way is to get Ga16de engine from non-nats nissan with the engine wiring and ecu, years below 1995.
@@nismomies3099 what modal car is the Ga16de engine from
@@nismomies3099 any reason before 1995? I found an GA16 in an Almera from 2000 I was hoping to use
1995 or earlier have more simple wiring loom, and dont have immobiliser, but you can do that if you want, but more wires and more difficult.
engine was from 1998 nissan primera.
Vissii rallienlantia