Be careful with that fuel rail man. I say it out of concern and bad experience, not trying to hate at all. I've had my rail studs shear off and back out because the mounting wasn't 100%. The mounting bases on the skunk2 h22 manifold were put in the wrong spot on the casting and skunk2 just offset the threaded hole for the studs, so when you installed the spacers they would over hang off the back of the mounting base. Looked fine, but when combined with the vibration of solid mounts it became shear point. They would back out and break religiously. No combination of grade 8 studs, loctite or spacers fixed the issue. I eventually had to bring the manifold to a local machine shop and had them weld on some spacers and drill and tap them for bigger allen bolts. My car actually caught fire while I was driving the last time it happened, luckily I was able to pull over and put the fire out with my sweater before it got out of hand. I'm not saying you're going to have this same issue, but I learned the hard way that you really can't mess around with fuel rail mounts. Especially with solid mounts, the vibration will work its way into anything that isn't bolted down square and flat
wow i scrolled on your page youve grown so much i know your father from brooklyn new york growing up, i was known as marie, is there any way you can extend a hello and best wishes knowing what he went through and a great recovery
I want to do this to my h22 swapped gsr but I don’t know what all to remove because I want that simple clean look. What can stay and what can goes. IE unnecessary hoses etc
Be careful with those injector pig tails because alot of people of issues with them having a bad connection and causing problems like mis firing ND u don't wanna mess ur fresh engine up
![ฮักเทื่อสุดท้าย - บอย ศิริชัย [OFFICIAL MV]](http://i.ytimg.com/vi/-1PoPoQ-B-k/mqdefault.jpg)
Be careful with that fuel rail man. I say it out of concern and bad experience, not trying to hate at all. I've had my rail studs shear off and back out because the mounting wasn't 100%. The mounting bases on the skunk2 h22 manifold were put in the wrong spot on the casting and skunk2 just offset the threaded hole for the studs, so when you installed the spacers they would over hang off the back of the mounting base. Looked fine, but when combined with the vibration of solid mounts it became shear point. They would back out and break religiously. No combination of grade 8 studs, loctite or spacers fixed the issue. I eventually had to bring the manifold to a local machine shop and had them weld on some spacers and drill and tap them for bigger allen bolts. My car actually caught fire while I was driving the last time it happened, luckily I was able to pull over and put the fire out with my sweater before it got out of hand. I'm not saying you're going to have this same issue, but I learned the hard way that you really can't mess around with fuel rail mounts. Especially with solid mounts, the vibration will work its way into anything that isn't bolted down square and flat
Interesting situation you went thru there bro
Lol @4:21 “why do I look so white?” . Bro this is the cleanest bay. Coming out super clean!
Haha! Than you bro appreciate it
Dreads coming in 🔥bro i have so much to catch up on
About to cut them off 😂
wow i scrolled on your page youve grown so much i know your father from brooklyn new york growing up, i was known as marie, is there any way you can extend a hello and best wishes knowing what he went through and a great recovery
Keep it going bro I want to see that car already in the streets 🔥
I want to do this to my h22 swapped gsr but I don’t know what all to remove because I want that simple clean look. What can stay and what can goes. IE unnecessary hoses etc
Surprising your keeping the distributor after going so far is this gonna be an only drag car
Be careful with those injector pig tails because alot of people of issues with them having a bad connection and causing problems like mis firing ND u don't wanna mess ur fresh engine up
Auto? Is it a power glide? Is this a daily driver?
I hope you do another meet like you did with toys for tots I’ll def go
Definitely will once the car is done
That manifold is 🔥. Where’d ya get it from Steven?
She almost ready to come back 😍 how long till you get it running ?
Clean Bro💯
What manifold is that? 👀
What's up bro. What dizzy did you go with?
Need bigger spacers on the fuel rail the injectors are curving..
I got spare heater valves
Distributor****
Auto??
Klk estaduro