Thank you for your feedback! Yes, you are right, suspension components should be tightened in full compression. Our new videos will surely contain information for our viewers. Best regards, Autodoc.
Thank you for the feedback! You can find out all videos of replacements in AUDI A6 C5 here: th-cam.com/play/PLWep5LzT0sxluxskB-tJaT_VW5NGDiJv4.html Stay tuned and follow our latest updates. Best regards, Autodoc.
Thank you for your feedback. It is unclear to us what he wants. Please clarify, on which minute the video shows it, so that we could understand it. Best regards, Autodoc.
то ли лыжи не едут то ли я того.Нузасунь болт изнутри подрамника чтоб в следующий раз люди не ипались откручивая подрамник лишний раз.И затягивать болты сайлентов нужно на стоящей машине.Немцы ск)
This bush seems to be a common failure on this cars . What is the reason for its failure ? I have replaced my whole suspension some 20k km ago (Lemførder and Ruville) , and this bush is now damaged again.
Because of exactly what he did in the video where the bolt through the new bushing was not tightened with the cars weight on the suspension. If you tighten with the wheel hanging, the bushing will tear near immediately as it tries to fight the weight of the car.
![How to change a front shock strut on AUDI A6 C5 Avant [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/CSwe1hzSBh4/mqdefault.jpg)
Should have tightened the inner bushing with the suspension at full compression (driving height). Bearing will quickly wear out installed as shown.
Thank you for your feedback! Yes, you are right, suspension components should be tightened in full compression. Our new videos will surely contain information for our viewers. Best regards, Autodoc.
Bad advise. If you tighten the bolts with decompressed suspension, that new bushing is going to tear in no time...
Well that’s the whole point to sell more 😂🫣
This guy getting paid by the hour or something?
Try shooting a video while installing something. Mongrel
Hi, great videos! Hey, what is NR? Is an NR18 wrench simply a 18mm wrench?
Need to show how to remove and replace front motor mounts
Thank you for the feedback!
You can find out all videos of replacements in AUDI A6 C5 here: th-cam.com/play/PLWep5LzT0sxluxskB-tJaT_VW5NGDiJv4.html
Stay tuned and follow our latest updates.
Best regards, Autodoc.
What is front arm suspension play in pin /bush on a Audi TT 2002 is it a big job plz
Thank you for your feedback. It is unclear to us what he wants. Please clarify, on which minute the video shows it, so that we could understand it. Best regards, Autodoc.
is there a video for rear sway bar link replacement
Thank you for the feedback! Stay tuned and follow our latest updates. Best regards, Autodoc.
то ли лыжи не едут то ли я того.Нузасунь болт изнутри подрамника чтоб в следующий раз люди не ипались откручивая подрамник лишний раз.И затягивать болты сайлентов нужно на стоящей машине.Немцы ск)
This bush seems to be a common failure on this cars . What is the reason for its failure ? I have replaced my whole suspension some 20k km ago (Lemførder and Ruville) , and this bush is now damaged again.
Thank you for the feedback! We strongly recommend you to visit a specialized car service center. Best regards, Autodoc.
:D this is not a feedback , but a question .
Because of exactly what he did in the video where the bolt through the new bushing was not tightened with the cars weight on the suspension. If you tighten with the wheel hanging, the bushing will tear near immediately as it tries to fight the weight of the car.
@@donaldsullivan6979 MVP
Because mechanics dont use brain sometimes.