@@Weerryuiop no need to seek for forgiveness ,is all good.. glad that it helps . Anything can ring me up on my insta. As I’m more active there @kbuildingthings
Excellent video and I do appreciate that you were detailed with the paint you used.. Thank You.. also like that you mentioned the LED series an drill bit. Looking forward to seeing more of your works. Great job Sir.. keep it up
@@K.buildingthings thank ya Sir, taken a few years to get it all in order and then 3 months to set it up while recovering from surgery lol getting old sucks sometimes.. but the down time was enjoyable.. I've got another room I have to set up for a different hobby this summer lol
You can .. it takes awhile to set it up .. 10 is just nice . Why don’t just set it up as a display first . When you decided to start painting you can work one 1 set first and test things out . Slowly progress from there
Hi there, thanks for watching the video. i got my LEDs off Shoppee. they come from china but unfortunately the previous seller no longer actice. There are other product avaiable , you can try searching " wired SMD LED" Size 0402 or Size 0603 . I paid roughly $5 for 20 wired LED. You can also try those robotics sellers on amazon, they might carry these product too.
yea , this whole build was experimental all the way. so there are a lot of things are my first time . weathering was mainly used to fill up panel lines the lazy way..
Just stumbled onto this page and I think it is fantastic! On time stamp 7:12 what is that staircase from I would love to purchase that!! And the crane nice stuff for a base!
@@scottfordbrewer4380 I’m not sure what is the brand . I got it from a local hobbystore . They just call it a domain base staircase / corridor . Ping me on IG I will share the image and link to it. Maybe you can use image search to find your local vendor that brings them in
For the base since is not something your eyes would focus on. So you can skip the preshade and straight do a base color (this case is black) then follow with highlights (the two shade of grey )
Great work and awesome video! Do you have a slowed down or non-speed build version? There are some parts when weathering the accessories that I'd like to see your technique on in normal speed cuz the video went so fast. And do you have a link for the crane you mentioned needing to buy from VT by chance? Amazing job!!
It’s nearly impossible not to speed up the video . Else the video be at least 50 hour long . You let me know which section you wan and I try check if I recorded it using timelapse or not. If I have it on normal speed I don’t mind sharing it . DM me on Facebook. Weathering was pretty much using Mr weathering and then removing it with lighter fluid .
hi toy bal. i power them with 2x AA size battery match with battery holder that you usually can get at those robotic hobby store, my older project salvage the holders from abandon toys
Amazing job bro! i want some suggestion. May i know where i can get third party 1:64 maintenance crew? Bandai 1/100 is too small for my PG . Thanks alot.
hi there i just notice i never got around replying to your comment. For this build i was using the 1:100 scale version from bandai. But if you want to use it for PG, 1:64 scale will be the best , generally these can be found from those Hotwheel or scale car collectors hobby store for their diorama. Those high detail ones are usually resin printed and dont come cheap
wow! realy great build! looking for the vt crane you mentioned but could't find them on the i-net! do you have a link (ebay or amazone?)? i come from germany so international delivery is necessary... THX...
Hey there .. they cranes are not sold separately .. they come as an accessory with the CG domain base . I bought mine at the local hobby store. If you can't find "CG domain base" on your online store can try the original product which is "kotobukiya mechanical chain base"
I so like this domain base style,I myself started making a base with your style as standard,may I ask you The micro smd led can using by rgb controller?? How to connect it ??
@ctm Chong . The RGB is from a tea light candle set I got from MRDIY store instead of a micro SMD led... then use optic fiber cable to transfer the lights over to the runway.. The only SMD led I used are the one on the cage &the back of the base
it really depends what you looking for. if you only have limted tools , then buy the Wing Gundam, becuase the kit whitout painting looks very plain . i used total of 12 box to create this scene, and total with LED extra accessories and painting is surely enough to buy a PG zaku.
I got total of 12 sets , so basic A-H set 1 each and additional 2 F and 1 B 1G, you can mix and match any kind of combination you like as long the wall backing are correct.
@@JerickoTejido depends how you plan to lay things out .. for me each block is 15cm x 15cm just nice for a MG . But will look very tight if you put one each . So I only made space for 5 and the rest are for the hangar bay accesories
What website(s) did you get most of the mechanical chain base sets from? I am having a hard time finding different sets other than the same few on multiple websites.
@soundblast52 I'm not sure where you are .. but I got mine from my local hobby stores I saw it before on GMC , here is the link www.gundammodelcenter.com/index.php?route=product/category&path=16
i got seperately off my local hobby store. is called the CG DOMAIN BASE STAIRSCASE & CORRIDOR. It might be called something else somewhere. shopee.com.my/CG-Domain-Base-(suitable-for-all-scale)-Staircase-Corridor-i.85615218.5618556815
Everyone I appreciate the subscribe and like .. i will be doing more 3rd party kits to help guide how to make it look better in the future . Any question , suggestion and feedback will be answered . Edit: any question can also directed to my IG page instagram.com/k.buildingthings?igshid=NTc4MTIwNjQ2YQ==
AMAZING MATER PIECE! its the best video of gundam base! and Im really love your technical,not less not much,as you say less is more,u made a colorful on SDMG,u made a great base in this video, and your digimon and exia is perfect tone.....oh my god Im looking forward your new video maybe more tutorial of coloring and LED, and I just sharing to my Hong Kong friends!wish you all the best
@@edmond411hair thanks for the love .. sorry haven’t had time to put up more video and content . But if you like to follow some of my recent work . I have it in my Instagram . instagram.com/kbuildingthings?igshid=YmMyMTA2M2Y=
Hello, just wanted to ask if the CG domain base compatible with VT domain base, comparing to other videos the VT is more suitable for 1/144 scale and a bit smaller in other videos as I compare it. Thanks.
@@MercyRabbit nope I both are same scale.. the whole base can fit RG up to PG depending on how big you build it .. accessories doesn’t really matter .. Base on another builder have used VT and CG. He recommended to use CG because better fitment . instagram.com/p/COqfEn6DOAR/?igshid=YmMyMTA2M2Y=
in 1:56 min there, can you tell me how to connect that part onto the base?? I bought a kit with the same parts but can't see how it can stick the base.
@@K.buildingthings if you used a community post section. You should be able to post picture too like any other social media. Saw other TH-camr post picture there
Hi, Your video is perfect, I learnt a lot from your video, Thank you very much for sharing how to build a domain base! I would like build my domain base but wanna to use my 1/60 PG Gundam, not a 1/100, a little bit biggest size, so I want to ask a few more question about that. Do you think the CG domain base Staircase and Corridor also match for the 1/60 figure, like some of the maintenance? I just a bit worry about the scale. About the colour paint for the whole base, if I want to do spray paint the colour like mechanical metallic. Which colour you recommend? And I saw from 5:34 to 6:00, which colour you were using? The colour just look very similar with photo-etched sheets and I love that! Sorry to ask too much but im just new and love to learn more! 🙏
@grace megumi , let me tackle few of your question . 1. if you planning to do a PG size, you can still a PGU into a two floor of the Domain base , but if you planning to fit a PG Unicorn, then it will be slightly over two floors 2. the CG staircase it is modular. so you can actually swith around panels to make it a giant 1 floor stair case like what your see @7:42 or even stack it up to a 2 floor stairs. Dont worry so much about the scale as it is actually big for a 1/100 scale . (you probably cant tell but the Engineer figures are 1/144 and many ppl use them in PG as well) 3. The colors, im mainly using airbrush to paint them. Not really an expert in spray can, but , going with Gun metal / Grey would give that industrial look to the base. as for the metalic colors i was using is from a chinese brand JUMPWIND. hope i manage to answer your questions. If you have more , dont shy away and go aheasd and ask.
May i ask a bit more about Thinner, after I did panel line for my gundam, I try to use very little SMS Premium Thinner with cotton swabs to brush the part of the line out of bounds. But after I brush I saw like a glue conjunctiva on the surface and cannot clean it.... Is that SMS Premium Thinner different from the X20 Thinner? I am first to use this ...🙏
@@gracemegumi9181 are you using tamiya panel line ? If yes then just use x20 or zippo lighter fluid.. Googled sms thinner . Is lacquer . Lacquer is stronger than enamel will remove all.
O i see ! yes, im using tamiya panel line, I have no idea the SMS premium thinner is too strong for that ! Thank you for replying and answer 🙏 I will get the X20 one !
Nathan i dont really get them from websites. most tool i get from my local hobbystore. but if there is something particular you want maybe i can give you the name rought price you can search it amazon or taobao
Hi! i am trying to build a base for my figuring collection. i have a couple of question on the base. is there a limit to how many based you can connect ? are they all the same edge ?. how high can you build it up, most photo i see it to max 3 levels. lastly how high in Cm/mm is 1 base ?
hi there is no limit to how many base you can connect , and the back panel is about 15cm heigh , so having 2 floors will be around 30cm usually ppl go max of 3 floor because there are not many kit taller than 45cm. If you have further question can message me directly on my IG same user name
![[GUNPLA] 1/100 MG RGM-79[G] - CUSTOM PAINTING, MISSILE LAUNCHER EFFECT DIORAMA filament LED](http://i.ytimg.com/vi/GXR9fdt_15o/mqdefault.jpg)
![[GUNPLA] 1/100 MG RGM-79[G] - CUSTOM PAINTING, MISSILE LAUNCHER EFFECT DIORAMA filament LED](/img/tr.png)
Forgive me for only seeing your videos now. These processes not only allowed me to learn some skills but also gave me a good viewing experience.
@@Weerryuiop no need to seek for forgiveness ,is all good.. glad that it helps . Anything can ring me up on my insta. As I’m more active there @kbuildingthings
Dude this look amazing! Great work man, worth it.
Thanks for the compliment
Excellent video and I do appreciate that you were detailed with the paint you used.. Thank You.. also like that you mentioned the LED series an drill bit. Looking forward to seeing more of your works. Great job Sir.. keep it up
Thanks for watching . I now mainly put my recent project and updates on Instagram. Video editing take too much time .
My IG profile : K.buildingthings
@@K.buildingthings awesome, Thank You for the name, I just started following you there, cowboy735.. keep rocking those skills Sir
@@RattleSnakeScaleModeler you have a dang cool work station
@@K.buildingthings thank ya Sir, taken a few years to get it all in order and then 3 months to set it up while recovering from surgery lol getting old sucks sometimes.. but the down time was enjoyable.. I've got another room I have to set up for a different hobby this summer lol
Absolutely beautiful work!
thx for the complement
WOW!!! Very cool my friend! Building/painting Strike M/S now.
Thanks for the complement
That's masking tips is really helpful 👍
You are welcome ❤️
that domain base looks sick! killer job!
thank you so much for the complement
Right on bro! It's looking killer!
subbed i wish i am this talented and have time to paint/decal hahah, but i do have 10 of these sitting in the backlog
You can .. it takes awhile to set it up .. 10 is just nice . Why don’t just set it up as a display first . When you decided to start painting you can work one 1 set first and test things out . Slowly progress from there
WELL DONE! 👏👏👏👏😳😳
Incredible!!!!!!
Thanks for the compliment @davidwood
Amazing build! I just placed an order for the same product but different set. Would you mind to share where to purchase the LED light please?
Hi there, thanks for watching the video.
i got my LEDs off Shoppee. they come from china but unfortunately the previous seller no longer actice. There are other product avaiable , you can try searching " wired SMD LED" Size 0402 or Size 0603 . I paid roughly $5 for 20 wired LED. You can also try those robotics sellers on amazon, they might carry these product too.
Thank you so much! Very detail and helpful information
Much welcome
Nice work but wheathering are bit unusual for hanger for realistic look..overall love ur airbl brushing
yea , this whole build was experimental all the way. so there are a lot of things are my first time .
weathering was mainly used to fill up panel lines the lazy way..
Wow! Great Job! keep it up!
👊
Just stumbled onto this page and I think it is fantastic! On time stamp 7:12 what is that staircase from I would love to purchase that!! And the crane nice stuff for a base!
@@scottfordbrewer4380 I’m not sure what is the brand . I got it from a local hobbystore . They just call it a domain base staircase / corridor . Ping me on IG I will share the image and link to it. Maybe you can use image search to find your local vendor that brings them in
Great amount of effort
How do you connect all leds? What circuit? Is it series or parallel? And do you use resistors?
Hi Marquis.. I only connect them directly to a 3v battery pack. No resistor
Awesome
very nice
thank for your video awesome , but how to shading base like you ? black -> gray -> white right ?😃
For the base since is not something your eyes would focus on. So you can skip the preshade and straight do a base color (this case is black) then follow with highlights (the two shade of grey )
@@K.buildingthings i see ,Thank you very much, thank you for your quick response , have a nice day ^^
@@misakiimoe3037 you can drop me a message on IG I can send you a video.
Great work and awesome video! Do you have a slowed down or non-speed build version? There are some parts when weathering the accessories that I'd like to see your technique on in normal speed cuz the video went so fast. And do you have a link for the crane you mentioned needing to buy from VT by chance? Amazing job!!
It’s nearly impossible not to speed up the video . Else the video be at least 50 hour long . You let me know which section you wan and I try check if I recorded it using timelapse or not. If I have it on normal speed I don’t mind sharing it .
DM me on Facebook.
Weathering was pretty much using Mr weathering and then removing it with lighter fluid .
Great work! I'm just curious how did you power those LEDs.
hi toy bal. i power them with 2x AA size battery match with battery holder that you usually can get at those robotic hobby store, my older project salvage the holders from abandon toys
Amazing job bro! i want some suggestion. May i know where i can get third party 1:64 maintenance crew? Bandai 1/100 is too small for my PG . Thanks alot.
hi there i just notice i never got around replying to your comment. For this build i was using the 1:100 scale version from bandai. But if you want to use it for PG, 1:64 scale will be the best , generally these can be found from those Hotwheel or scale car collectors hobby store for their diorama. Those high detail ones are usually resin printed and dont come cheap
wow! realy great build! looking for the vt crane you mentioned but could't find them on the i-net! do you have a link (ebay or amazone?)? i come from germany so international delivery is necessary... THX...
Hey there .. they cranes are not sold separately .. they come as an accessory with the CG domain base .
I bought mine at the local hobby store.
If you can't find "CG domain base" on your online store can try the original product which is "kotobukiya mechanical chain base"
good job brooo
thanks for the feedback! anything i should improve on? i know my voice over explaination not that great yet but this is my first attempt
I so like this domain base style,I myself started making a base with your style as standard,may I ask you The micro smd led can using by rgb controller?? How to connect it ??
@ctm Chong . The RGB is from a tea light candle set I got from MRDIY store instead of a micro SMD led... then use optic fiber cable to transfer the lights over to the runway..
The only SMD led I used are the one on the cage &the back of the base
Can refer to @24:45 part of the video
nice tips and tricks, that set of hangar base for MG is costs same with a brand new Wing Zero verka kit in my country, do u think its worth?
it really depends what you looking for.
if you only have limted tools , then buy the Wing Gundam, becuase the kit whitout painting looks very plain .
i used total of 12 box to create this scene, and total with LED extra accessories and painting is surely enough to buy a PG zaku.
my hand and fingers really hurt trying to assemble the base, did u sand any of the connection points?
The base ,No .But the connection points for the accessories ,yes . I only widen them with a drill bit
They are normally labelled Unit A to K..may I know how many of each you purchased?
I got total of 12 sets , so basic A-H set 1 each and additional 2 F and 1 B 1G, you can mix and match any kind of combination you like as long the wall backing are correct.
Thanks! Now I know what to buy..geez their instructions are downright confusing for me (for fitting 5-6 MG) :D
@@JerickoTejido depends how you plan to lay things out .. for me each block is 15cm x 15cm just nice for a MG . But will look very tight if you put one each . So I only made space for 5 and the rest are for the hangar bay accesories
Thanks mate!
Will ordering 1 decal enough for those?or is it safe to get 2
What website(s) did you get most of the mechanical chain base sets from? I am having a hard time finding different sets other than the same few on multiple websites.
@soundblast52 I'm not sure where you are .. but I got mine from my local hobby stores
I saw it before on GMC , here is the link
www.gundammodelcenter.com/index.php?route=product/category&path=16
@@K.buildingthings Thanks for the help!
I have a question: Where did you get that staircase model from?
i got seperately off my local hobby store. is called the CG DOMAIN BASE STAIRSCASE & CORRIDOR.
It might be called something else somewhere.
shopee.com.my/CG-Domain-Base-(suitable-for-all-scale)-Staircase-Corridor-i.85615218.5618556815
@@K.buildingthings Thank you!
the maintenance crew figure at 19:04 can u share the link where you bought it?
I bought from my local hobby store. Is a resin copy .. but if you can find bandai original one is call "ms builders parts figure #01"
@@K.buildingthings i tried, but the Bandai models always run out of stock. You are from Malaysia right? I am from Malaysia too
pleaseee
Oh then you can get it from Hobby store
www.thehobbystore.my/products/bandai-builders-parts-hd-1-100-ms-figure-01
@@K.buildingthings thank you! i have ordered from them, I really appreciate it
Everyone I appreciate the subscribe and like .. i will be doing more 3rd party kits to help guide how to make it look better in the future . Any question , suggestion and feedback will be answered .
Edit: any question can also directed to my IG page instagram.com/k.buildingthings?igshid=NTc4MTIwNjQ2YQ==
AMAZING MATER PIECE! its the best video of gundam base! and Im really love your technical,not less not much,as you say less is more,u made a colorful on SDMG,u made a great base in this video, and your digimon and exia is perfect tone.....oh my god Im looking forward your new video maybe more tutorial of coloring and LED, and I just sharing to my Hong Kong friends!wish you all the best
and you make me decied to DIY a smaller domain base like you, may be 50cm x 30cm in my glass cabinet,and put on some GUNDAM on that
@@edmond411hair thanks for the love .. sorry haven’t had time to put up more video and content . But if you like to follow some of my recent work . I have it in my Instagram .
instagram.com/kbuildingthings?igshid=YmMyMTA2M2Y=
Hello, just wanted to ask if the CG domain base compatible with VT domain base, comparing to other videos the VT is more suitable for 1/144 scale and a bit smaller in other videos as I compare it. Thanks.
@@MercyRabbit nope I both are same scale.. the whole base can fit RG up to PG depending on how big you build it .. accessories doesn’t really matter ..
Base on another builder have used VT and CG. He recommended to use CG because better fitment .
instagram.com/p/COqfEn6DOAR/?igshid=YmMyMTA2M2Y=
in 1:56 min there, can you tell me how to connect that part onto the base?? I bought a kit with the same parts but can't see how it can stick the base.
Oh that I don’t stick on to the base .. is free moving .
@@K.buildingthings i see. Thanks 👍
@@leonk9168 wish I can show you some photos .. but too bad TH-cam can’t attached any
@@K.buildingthings if you used a community post section. You should be able to post picture too like any other social media. Saw other TH-camr post picture there
Hi, Your video is perfect, I learnt a lot from your video, Thank you very much for sharing how to build a domain base!
I would like build my domain base but wanna to use my 1/60 PG Gundam, not a 1/100, a little bit biggest size, so I want to ask a few more question about that.
Do you think the CG domain base Staircase and Corridor also match for the 1/60 figure, like some of the maintenance? I just a bit worry about the scale.
About the colour paint for the whole base, if I want to do spray paint the colour like mechanical metallic. Which colour you recommend? And I saw from 5:34 to 6:00, which colour you were using?
The colour just look very similar with photo-etched sheets and I love that!
Sorry to ask too much but im just new and love to learn more! 🙏
@grace megumi , let me tackle few of your question .
1. if you planning to do a PG size, you can still a PGU into a two floor of the Domain base , but if you planning to fit a PG Unicorn, then it will be slightly over two floors
2. the CG staircase it is modular. so you can actually swith around panels to make it a giant 1 floor stair case like what your see @7:42 or even stack it up to a 2 floor stairs. Dont worry so much about the scale as it is actually big for a 1/100 scale .
(you probably cant tell but the Engineer figures are 1/144 and many ppl use them in PG as well)
3. The colors, im mainly using airbrush to paint them. Not really an expert in spray can, but , going with Gun metal / Grey would give that industrial look to the base.
as for the metalic colors i was using is from a chinese brand JUMPWIND.
hope i manage to answer your questions. If you have more , dont shy away and go aheasd and ask.
@@K.buildingthings
I really really appreciate your answer my question!! It helped me a lot! Thank you so much !! !! 🙏🙏🙏🙏🙇🙇
May i ask a bit more about Thinner,
after I did panel line for my gundam, I try to use very little SMS Premium Thinner with cotton swabs to brush the part of the line out of bounds.
But after I brush I saw like a glue conjunctiva on the surface and cannot clean it....
Is that SMS Premium Thinner different from the X20 Thinner? I am first to use this ...🙏
@@gracemegumi9181 are you using tamiya panel line ?
If yes then just use x20 or zippo lighter fluid..
Googled sms thinner . Is lacquer . Lacquer is stronger than enamel will remove all.
O i see ! yes, im using tamiya panel line, I have no idea the SMS premium thinner is too strong for that !
Thank you for replying and answer 🙏 I will get the X20 one !
Where did you get the stuff to do all this what website??
Thanks
Nathan i dont really get them from websites. most tool i get from my local hobbystore.
but if there is something particular you want maybe i can give you the name rought price you can search it amazon or taobao
Sweet thanks mate Il check out your page looks awesome dude 😎
Hi! i am trying to build a base for my figuring collection. i have a couple of question on the base. is there a limit to how many based you can connect ? are they all the same edge ?. how high can you build it up, most photo i see it to max 3 levels. lastly how high in Cm/mm is 1 base ?
hi there is no limit to how many base you can connect , and the back panel is about 15cm heigh , so having 2 floors will be around 30cm usually ppl go max of 3 floor because there are not many kit taller than 45cm. If you have further question can message me directly on my IG same user name
how did you do it can you share with me , thank you
Sorry What do you mean how do I do it ?? The whole video is how I build it 😂
Son los hangares que están en Aliexpress?
i believe you can get them from aliexpress. i got them from local hobby store
Can i know what set that u use?
I wonder if my mg jesta cannon will fit?
@@zaarif2246 you can fit a PG even if with this size but not the cages
@@K.buildingthings can just buy 1 base of my MG because i wan to put inside my display cage, or i need to buy whole set?
@@zaarif2246 1 is too short .. is only 15cm tall. MG is around 20cm tall
Which LED circuit you use?
I'm using mostly Micro SMD LED size 0603 or 0402. Direct to 3v battery power pack .
Remote LED is from those a LED TEA CUP CANDLE SET
Thank you so much. I have micro LED but when I put all 5 it didn’t work.
@@JustForFun-hy9pp what is the voltage been used ? You need 2.5v -3v depending on color .
Pakai cat apa bang?
Mix bro... Lebih kepada anchoreT and Jumpwind
Hand paint , Vallejo metallic & Tamiya enamel