HEAVY DUTY Portable Ramp Build Overview, tips, and test...
ฝัง
- เผยแพร่เมื่อ 13 มิ.ย. 2021
- Beefcake construction in full effect. Just like proper upgrades inspire confidence, same holds true for a stoutly built moon launcher. Here's a detailed overview of proven construction principles to create your own custom sender. There's lots of designs that will work. These are skater and bike ramp concepts I've relied on successfully for decades. Please don't attempt to use power tools without 100% focus on tool safety and intimate knowledge of proper safe technique. Seek help from an experienced or professional craftsmen as needed.
And I LOVE your Kraton 6s! 🔥🔥🔥 I have a stock v3 and just built my EXB 6s getting a Typhon 3s with 6s system and a Typhon 6s within the week! You're the main reason I chose to get my Kraton 6s V3 as my first RC last summer!
So Saturday I’m watching ramp building videos and you release this today, serendipity! What a build and man it makes some stuff clear, thanks for getting out and suffering in the heat for this build. Mine won’t be as big but can’t wait to put it together and see the results. Great video and spectacular jumps.
Thanks so much Harry 🤗. I'm planning to build a smaller ramp with leftover wood I've saved up. I had an earlier ramp that stood only 19" and it was a complete blast 😍. Still got nice air and killer distance. 👀. Appreciate the kind words Brother. 🍻🚀🚀😎💪👊👊
Killer how to video, Love watching you just send it, at what seems to be full speed! Never gets old man!!
Thanks so much Jon 🤗. Glad to have the Beefcake ramp done ✅. She'll take full speed 8s hits all day long now 😱🍻😎💪👊👊
Awesome! Great info. Different than the skateboard ramps I used to build. I can't wait to send! Thanks man!
Thanks so much Brother 🤗. I've stuck with my skater and BMX build techniques. The lag screws make a huge difference in strength though 👀🍻😎💪👊👊
Dude, so helpful! I've had a ramp I built for my Stampede 4x4 and Losi 8 nitro which worked great. I just recently got my first 6s rig (Kraton V5) which is a lot bigger than my stampede and 8. After a couple jumps the ramp I had used for 2 years was done. I was punching a hole in the particle board upon initial entrance of the ramp. I thought let me use 1/4 plywood instead. After 15 minutes that ramp I just built was done as well. I remembered watching this video awhile back and decided to watch it again. You have all that reinforcement at the entry point to prevent putting holes in the ramp. I now know how to fix my problem. Thank you. Love your vids!!
Thanks so much Ron 😜. Ramp building can be a trial and error affair. My last ramp did great overall with 6s, but got hammered with the 30+lb ARRMA 8s rigs. I use to make them as light as possible for the task at hand. That's fine when it holds, but punching holes, splitting templates, and busting cross braces gets old. You basically chase your tail doing patch jobs. Glad this vid was helpful Brother. 🍻😎💪👊👊
Love watching your videos! You've taught me so much more than anyone else I've watched. Thank you so much for your content, tips, and tricks!
Thanks so very much for the warm comment my friend 🤗. Glad some of the stuff has been helpful. Truly appreciate it. Happy bashing!!!! 🍻😎💪👊👊
@@richduperbash2966 You're welcome! Happy bashing brother!!! Could you do a video on the best servos to use for all your rigs?
@@newamericatowguy3633 sorry I missed your reply Brother 👀. I run mostly Power HD 23kg WP servos in my 6s rigs and Hobbystar 6912 in all my 8s rigs. Can't beat the performance to value. 🍻
THANKS SO MUCH FOR THE GREAT INFO! Ive built quite a few and i learned some great info. awesome sends too!
Thanks so much Brother Avery 😜!!!! Building ramps is super fun 😍. Hope guys get some good ideas from this. Both rigs did Fantastic with M2C Racing beef in full effect of course 🍻🚀🚀😎💪👊👊
Nice ramp and good tips !! Thanks man!
Thanks Claude 🤗. Appreciate it Brother 🍻😎💪👊👊
I’m writing this before I watch, but I so need a portable ramp and have been putting off building one!! Thanks for this as it helps us noobs learn from you!
You bet Jon 🤗. Hope this vid gives guys some ideas about how to make their own custom sender. 🍻😎💪👊👊
Really cool video, lots of great tips. Beautiful work, so much attention to detail!
Thanks so much Brother 🤗. Really hope this vid proves helpful. 🍻😎💪👊👊
Listening to you explaining the ramp's build up is like a review of a new M2C parts..Thumbs up!
Thanks Brother 👊. Really appreciate it. Building ramps is actually fun. Just sucks that lumber prices are completely jacked at the moment 😂. Definitely measure twice and cut once 👀🍻😎💪👊👊
@@richduperbash2966 Even NASA couldn't keep up with your launches : )
Nice ramp build and awesome jumps
Thanks so much Brother 😜. Really appreciate it 🍻🤙🤙😎💪👊👊
Nice one great ramp and great tutorial
Thanks so much Brad 🤗. Truly appreciate it Brother 🍻😎💪👊👊
Dude, you make those RC hang in the air for ever (seem like), that is awesome.
Superb job Mr.Duperbash.....👏
New ramp time ! Been waiting for this bad boy , send it Rich 👍💪😜🔥
Thanks Lucas 🤗. This new ramp is doing Killer Brother 😱🍻😎💪👊👊
@@richduperbash2966 sweet mate . Definitely be rigging one up like that for myself. Small question if you don’t mind, what servo you running in your latest exb? I had a savox 40kg but it was a bit underwhelming and noisy as even with endpoints back way off . So I went Kev Talbot way with a power hobby HD 65 kg . Seems better once I re configured the avc but I buggered the avc because I had to reverse the servo but forgot to re bind. 😂
Great built , got some good pointers there!!!!!
Thanks Stephane 😜!!!! Hope it helps give some ideas for our bashing brotherhood out there. 🤗🍻😎💪👊👊
Super awesome informative video. Thanks much!
Thanks Brother 🤗. I hope it's helpful for ideas...etc... for making a custom sender 🍻😎💪👊👊
Very cool ramp. Super clean and looks pretty dam sturdy. Always looking to to try and make something that I might be able to take apart somehow to be more portable
Thanks Peter 👍. There's different ways to make folding ramps...etc. Just involves some ingenuity. This setup works well having a minivan. 🍻
Nice one Rich!!!
Thanks so much Michael 🍻😎💪👊👊
Nice ramp man ‘ you sure put a informative video up here. 👊😀
Thanks so much Brother 😜. Tried to share all the basic key concepts for solid construction and nice sends. 🍻
@@richduperbash2966
🤝👊😀
I’ll make my next ramp based on this exact build design.
Your work is spreading around the world.
Worldwide RC influence Man heck yeah 😍❤️🥰👊😀🤘👍🤝✌️💪😀😊
Great show.
A flawless Slice of portable heaven with Maximum overflow of awsomeness
Thanks so much Brother 🤗. Stoked this Beefcake version turned out nice. Plenty of up and out to have fun 🍻😎💪👊👊
The 👑 is back with a vengeance lol spectacular bash Rich awesome
Thanks so much Dhon 😜!!!! I had way more running footage from 2-3 group bashes, just didn't want to make a crazy long vid. I hope the build info proves helpful for guys wanting to make their own custom sender 🤗🍻😎💪👊👊
Wow that ramp is built like a tank. Good job!
Thanks so much Brother 😜. After seeing what the heavier 8s rigs can do to lighter studs and screws over time, it was time to go full Beefcake with the materials. 🍻😎💪👊👊
Solid ass ramp brother! 👍🤘👊👊
Thanks John 🤗. It's been working out great Brother. Hope all is well. 🍻🚀🚀😎💪👊👊
Brilliant job💪👌👍
Thanks Brother 🍻😎💪👊👊
Awesome beefcake Ramp build Rich! Appreciate all the helpful tips in the process. It Launches the big Mama no problem. Definitely got the angle just right for some big air and distance Bro. Love the flat top as a bench. That wing was hanging on for dear life 😂. The front2back flip was wicked bro. Another great one brother.
Thanks so much Brother Chris 😜!!!! Been wanting to do a ramp build vid for awhile 👍. I regret not getting a top view of the bare frame as planned, but my son had his friends over and they volunteered to help press and hold the top sheets while I got the screws sunk. Hopefully guys got enough of the fundamentals. So stoked she turned out stout 💪. No more speed scrub, punched holes, and cracked 2x3's 😂. I'm shocked the old ramp took the 8s rigs as long as it did 👀. Can't wait for a beefier wingmount option. 🍻🤙🤙😎💪👊
What a Monster of a ramp! 👍👍👍 Very cool, I wish I had a truck to transport a ramp like that. Have fun launching the rigs 😘😘😘
Thanks so much Kimberly 😍. The van has become a great RC hauler. It's nice being able to lock up without drawing attention to what's inside 👍. I had an older ramp I could fit in my Forester. This ramp should make for some fun times with friends 🤗🚀🚀😎💪👊👊
Hey Kimberly, ordering all the bling for my infraction, can’t wait 😜
@@Captinfun101 awesome, you will love it 💕
I called that the super launcher rich duperbash RAMP!!
You built it just right
so convenient for you but that ramp can still launch those car far and super high great built!!🙋♂️💪💪👊🤙👍👍👍
Thanks so much Brother Clarence 😜!!!! This dimension works great for nice sends while still being highly portable. Really comes down to a smooth transition and good lift. Truly appreciate it my friend. You are a true craftsman and your compliment means a lot Brother 🤗👍👍😎💪👊👊
huge ramp, i'd still miss it haha
Nice build man I learned the hard way even with my 6s rigs on cheap and flimsy ramps. Used to just try and throw something together every time we went out. I can’t tell you the number of make shift ramps I barreled through thinking they would hold. Finally built a proper one and haven’t had any trouble since lol as always brother great video
Thanks so much Anthony 😜. I used to build ramps as light as possible for convenience. That's great until you barrel right through top sheets and karate chop the frame 😂. The forces involved aren't fully appreciated until you see first-hand what an RC can do at speed 👀. Definitely a learning experience 😂🤙🤙😎💪👊👊
With the cost of lumber the ramp may be worth more than the van!
Gonna need a bike lock to secure your ramp.
@@VERY_MAD_ALIEN LMAO 😂
During lockdown last summer I built a ramp outta some beefy pallets I found outside a building I needed a Sawzall to cut the wood
That is so funny but maybe true 😂😂
I was going to say the same dang thing. You have enough cost in lumber to buy a brand new beefcake M2C Kraton 8S instead LOL
Nice Rich👍🏾
Thank you Brother 🤗🍻😎💪👊👊
Awesome ramp overview Brother Rich!👌 Nice details on the build for sure! Making it sturdy is a must especially for the heavyweights!💪💪This will really help a lot of guys out interested in making a ramp since good ramps are impossible to find now! SICK test too with Big Red and Orange Darling!😍Sucks on the wing mount!😆I keep a couple spares in my box now since a go through one a bash it seems!🤣🤣Killer vid bro! Take it easy!😎💪🤘🤘🍻
Thanks so much Brother Eric 😜!!!! I put off building this ramp for several weeks cuz I've been so busy lately and had kept patching up the first one. No question these 30lb rigs require stout materials all around 😱. Still shocked my lighter ramp lasted as long as it did 😂. So many wide open send sessions the past couple years, lots of great times with friends 🤗. That wingmount was literally out of the package new 😝🤣🤣. I always carry spares, but didn't feel like swapping it again. Waiting anxiously to see what Tom comes up with from his 3D printer 👀. Appreciate the kind words Brother!!!! 🍻🤙🤙😎💪👊👊
Luckily for me I just use your ramp 😉 can't wait to abuse the rigs with it some more 😁. Great job on it and the video for those looking to build one!
Thanks so much John 😜!!!! So glad to finally have the new ramp built 💪. The last one got so hammered by the 8s rigs. Still shocked she lasted almost 2 years with the skinnier ply and framing. Can't wait until we can catch a break from the crazy winds 😂. Every time out has been kite weather lately 👀. Big sends in high winds is such a crap shoot. Hope we can hook up again soon Brother. 🍻🤙🤙😎💪👊👊
Awesome how video man. I drive a sedan so I'm trying different ramp ideas. Like a way I can have several narrow ramps that can feed into each other like a Russian doll lol for transport n set up as a wider ramp. The 45 degree is a huge help too I can imagine at least half of us ha e designed mini quarter pipes by trial I'm sure lol. Thank you for another awesome video man can't wait to see many sends off that baby 🍻🍻🍻🍻🍻🍻
Thanks so much Nick 😜. You'll have to get creative with a sedan. A build on site or foldable ramp might be the answer 🤔. 45° is really a great take off 👍. I've built lots of different ramps through the years. Some were trial and error projects, but each was worthwhile and taught me something. Too much up is harsh without a proper downslope to land on 👀. Appreciate the kind words as always Brother. 🍻🚀🚀😎💪👊👊
Rich i can only say am so sorry for missing your vids 😔 why I've not had any notifications 😔 😕 this was a awesome video, the Ramp looks amazing and great info how to build it 👍, the ramp did a great Job 👍 amazing Jumping as always 😱I finally got a Kraton 😛 really enjoyed this Video and hopefully I can keep up with your vids again 🙏 , keep safe and well bro 🙏🇺🇲😎🇬🇧🙏
Thanks so much Brother Tony 🤗. I've also had notification issues with several of the guys I've been subbed too for years 😝. TH-cam is just weird 🤣. So glad to have this beefier ramp done. HUGE Congrats on your Kraton 😱🥰🥰. Hope you're digging it my friend!!!! 🍻🚀🚀😎💪👊👊
Best thing I’ve found to coat these Ramps with is red guard form your local Home Depot . It’s pricey because it works good . I threw sand on the wet coat and recoated on one ramp and it’s a gripper bro . This will keep your ramp dry outside and on the wet ground . Make sure to get the sides good . 3 coats at least 👍👍. I thought rhino lining might be ok too but I had extra red guard . We use it as an extra water barrier on top of concrete board on floors and in showers before tile is laid . Totally not necessary but it is good stuff
Thanks so much for the tip my friend 🤗. I've heard of red guard before. I ended up using porch paint on my kids half pipe "mini ramp" I built years ago and it also works quite well. 🍻
Nice ramp. Super nice ideal with taking cardboard to a skate park. Make a template 🤯. But orange darling looked absolutely killer out. 💪💪💪💪👊👊👊
Thanks so much Jordan 😜. Tracing an existing transition can be the way to go 👍. If not, the compass and string method is very effective for drawing a perfect, smooth transition..
Solid man.
Thanks for the info
You bet Brother 👊. Hope it proves helpful for others. 🍻😎💪👊👊
Beautiful and BEEFY all in one!!!!!! 😍😍
Great in depth video brother 🤟🏼👍🏼
Thanks so much Brother Dave 😜!!!! Hope we can hook up after the desert heatwave about to blast NorCal 😱🥵😂🚀🚀😎💪👊👊
I got that esc mount on the way for my notorious from basher queen max 6 combo going on my v5 notorious 6s going to b a beast great tips on the ramp
Thanks Curtis 🤗. Much appreciated Brother. Your Noto is gonna be a monster with that huge 1650 👀. Might have to keep the punch at 3 to keep the front end down. 🍻😎💪👊👊
Dam! That is super heavy duty! I think you have more wood in your ramp than I do in my two wood ramps combined 👀👀
Thanks Aaron 😜. After seeing what the heavy 8s rigs did to my last ramp, I knew exactly where the extra beef was needed. Still shocked the first one took the beating it did 😂🚀🚀😎💪👊👊
You did a good job on the ramp. I looked to build a ramp today and I priced the wood and decided I don't really care about an rc ramp until wood prices come back down. Its insanely high right now.
Thanks so much Brother 👍. I completely understand your decision to wait. Lumber prices are completely ridiculous right now. 🍻😎💪👊👊
Front- to backflip???
Supercool!
Always epic bashing
Thanks so much 😜!!!! Had a blast out there. 🍻🚀🚀😎💪👊👊
Slow floater front flip to fast backflip was sick! Some xxx main shit !!
Thanks so much Brother 😜!!!! Even jumping into headwinds and crosswinds, this ramp offers far better control without flexing, sliding, and scrubbing speed 👊. Much appreciated my friend. 🍻😎💪👊👊
Sweet vid man👌 that should help some people out, I had no idea what I was doing making my first few ramps😅
And man, front/back flips, I miss doing them so much😩
Thanks so much Brother 😜. Building a ramp is definitely a learning experience. Pays to take the time and get the dimensions right for your needs. 🍻😎💪👊👊
@@richduperbash2966 absolutely man, dimensions are most important, and yours looks almost perfect for anything!
I would've tried to Kickflip Indy that back in the day🛹🤣
A good video! Would be good for a step-by-step ramp build video.
Thanks John 🤗. Maybe when it cools down and I have more time. 😎💪👊👊
Thank you for this Rich! I've been wanting to get a ramp setup 👍👍👍 Besides the cost of lumber lately being insane! Hopefully I can get one put together this week as I was in a car accident two weeks ago and broke my neck so I'm off work at home for few months in this neck brace bored as heck!
You bet Brandon 🤗. So sorry about your accident and broken neck 👀. Be careful you don't aggravate or reinjure yourself. I usually have to get on the ground and torque my neck a bit to get the base cross members lined up and screwed down. I'd see if someone can help out for some of it anyways. 🍻😎💪👊👊
@@richduperbash2966 thanks so much Rich!! 🤜🤛 I'm trying to take it as easy as I can it just gets soo boring sitting around so I'm soo happy I've got RC to keep me going 👍 I will make sure my buddie gives me a hand so I don't mess myself up anymore than I already did! Hahah thanks again bro really appreciate the help!
@@brandonreid4511 you bet Brother 👊. Hope you heal quickly 🍻
Very nice video and super duty ramp. I'm looking at building one but will have to make a smaller more portable version as mine will have to go in the attic in between runs. I wish I could make a diesel one like that but then it would live in my living room and my wife would kill me.
Thanks so much Johny 🤗. Happy wife, happy life 100%. I totally get your situation Brother. Hope you can get something more portable or foldable figured out. Merry Christmas 🍻😎💪👊👊
@@richduperbash2966 Thank you and Merry Christmas to you as well.
i know i'm not the only one who was rootin' for the lil bug.. way to leave nature be! 😂
Damm Rich, I really wish you lived in southern Indiana. Would love to pick your brain! Especially with my new kraton exb roller setup. Or maybe I just need to move to California!
Thank you rich really appreciate it hit the like button 👍
Dude that is pretty much exactly how l built my ramp. Little different materials. Like the casters
wow very beefy ramp. I made some and learned a lot would like to build again, but the lumber prices are to much right now to be worth it.
Thanks Brother 🤗. Agreed 100% on waiting for prices to normalize 👍. Unfortunately, my old ramp reached it's limits from heavy 8s abuse. Just bit the bullet with it. 🍻😎💪👊👊
Sweet
So I got a question when you made your wide mojave kraton can I use my m2c extended hubs on it
So I need all the
A arms driveshafts use the kraton caster bearing holders or the mojave what else do I need
Hey Rich, killer vid, and thankyou for the advice earlier I'm defs getting a k8exb or the new outcast. I already have 5687 1100kv max 5 combo so can't wait to do those few key m2c upgrades and get some footage of my own I'm nearly set up!! Can't wait to see more mate thanks again♥️🚀
Thanks Saran 🤗. You're welcome for the recommendations too Brother 👍. Hope your new build comes together nicely. 🍻🚀😎💪👊👊
Awesome! Great vid. Is that Folsom Lake you’re bashing at?
Thanks Ryan 🤗. Yes indeed about Folsom 😍. Absolutely LOVE the lake for fishing, hiking, Mt biking, and just rippin around. 🍻😎💪👊👊
@@richduperbash2966 yes sir! Great lake! I’m down in Modesto so it’s not so foreign to me. Anyway… lovin your content, bud!
@@ryancasey973 thanks Brother 🤗. Hopefully we'll see water levels get back up. Kinda like a pond at the moment 😂
@@richduperbash2966 no doubt. Looks like it’s going to be a while though, unfortunately. Stay hydrated. 🤣🤣
Wow I would love to see this in person! I learning and I wish I could land so smoothly.. is it stock?
The Outcast 8s has electronics aftermarket and M2C Racing 7075 T6 chassis and other upgrades. The "Orange Darling" 6s is a beefed up Kraton 6s with longer Mojave M2C chassis. I did a build video about it a few weeks ago. 😎💪👊👊
I'm seriously impressed that you didn't break anything. What truck is that?
The "Orange Darling" XL is an upgraded Kraton 6s with a longer Mojave M2C chassis. It's a new build I recently put together. I'll link the overview vid if you're interested 😎💪👊👊th-cam.com/video/rYZeRUD3JkQ/w-d-xo.html
Those were high!
The ramps curve sends them pretty good 🍻😎💪👊👊
Haha! I just got a ramp just like that for FREE from a millionaire who didn’t want it anymore! It’s like Your ramp but above the surface you drive over there is a sheet of textured plastic that gives it grip when driving over the ramp kind of like a grip tape! I would suggest that mod ( putting grip tape on the ramp ) Lol I guess I was just in the right place at the right time! Great video brother! 👍👌😎🏎
Bro one of these days when I start my yt channel, I wanna collab with you. I live in Arizona but I go to California all the time.
Literally air surfing. 🇨🇦🥓
Rich, If you had to choose one which would it be, Kraton 8s or Outcast 8s?
For pure fun factor, probably the Outcast 8s. The thing is, the Kraton is better for massive jumps and high speed drifting. It gets the power down much easier without the front end lifting. 😎💪👊👊
nice work May I think this ramp would be better for you it folds like a suitcase and you can put it in your trunk easily 👍
th-cam.com/video/OYXH7nC3rjU/w-d-xo.html
area 51 best ramp 👍
th-cam.com/video/8K5qx61lgBY/w-d-xo.html 👍
th-cam.com/video/DjTlVloHXCg/w-d-xo.html 👍
That ramp is Killer for doing mountain bike or MX jumps as designed, but too narrow for RC at high speeds. 🍻
Where is this spot you launch at? The one you usually go to looks like a construction spot?
That's Folsom Lake, CA. Absolutely beautiful place to recreate.🍻😎💪👊👊
Hey rich I’ve noticed you run hobby star on some of your rigs and on one of your kratons I think. I’m building me up a v4 kraton and I’m runnin the stock blx 6s system and I was wantin to put a hobby star motor in it but what Kv would you suggest for the factory blx system and what size pinion do you run? Thanks man I appreciate it.
Oh and I’m runnin backflip lp’s. I take a lot of ideas from you and rcdude81. I’m a huge fan of both you guys. And I’m tryin to build a basher similar to yours and his. Thanks again for any info or advice you can give.
Hey Trevor 🤗. Been running Hobbystar motors for years. Love the 4092 1730kv. Most guys run them on an 18-20T pinion. I haven't ran mine paired with the stock BLX185 ESC, but it would probably work with all 6.5mm connectors. In general the 4092 is probably best ran with a 160A ESC for max performance, but RCJuice claims any 1/8 150A is sufficient. 🍻
Hey man I really appreciate that. I thought about gettin the 1900kv and runnin it on a 18 tooth pinion but I was just worried it might be too much motor for the blx185.
@@richduperbash2966 I actually think I’m gonna go with the 4092 1730. It seems like it should work with the blx system. Man I really appreciate your help. Thanks again!
Take a look at a sheet of HDPE for the top sheet. Way more durable. It’s like a cutting board material. You can get it thin enough to shape it.
Thanks for the suggestion Brother 🍻. Polyethylene is Crazy durable with tons of applications.😎💪👊👊
Hey Rich was wondering what I could do to prevent my rear main diff gear from constantly stripping out on my kraton 6s?
Make sure to shim as needed. I typically run 2 or 3 Tekno #1222 shims on the crown gear side bearing to help keep the input and crown gears in better alignment. Make certain your diff case isn't cracked or stripped. Otherwise it won't do it's job keeping the diff in its proper position. 🍻😎💪👊👊
Thanks rich u da man!!
I think the ones which can be bought out of metal and can be fold are much better as your wood construction. And even if I would build one it would be out of metal nod wood.
Metal ramps can be very strong no question. Unfortunately, they can also be heavy, loud, and damaging to RC's. If you have a metal mesh surface in particular, any chassis screws that come loose will snag and snap clean off. Metal ramps are best for freestyle MX in my opinion. The only decent premade ramp I've seen is the Freshpark Ramp. The rest look like overpriced junk 😝
Hey rich i just wanted to know what would be better the hobbywing max 5 with the 1100kv or the 800kv hobbywing all around
That's a tough call 🤔. Both motors are great with the right gearing. I'd recommend the 800kv with 1/1 gearing for the heavier Kraton and probably the 5687 1100kv with around 29/39 gearing on the Outcast 8s. 🍻😎💪👊👊
Right on 800 it is with 1to 1 yessah thanks I gotta order my outcast now lol exb thanks again
For servo what u recommend best budget or i shouldn't budget just go straight get a good one
king bash....all day
Anyone have problems with kraton 6s diffs? I keep braking a planetary gear. It’s super annoying. I’ve got ear plugs in all 3 diffs. It’s a v5 tuning 6s…
Ear plugs are too thick for the 6s rigs 👀. The truck can't diff out as designed when needed. That puts all the force on the planetary gears and set pins. I run 50/500/20k front to rear and it works great. 🍻
Dude was wondering if the ass end of my truck would quit bouncing up on landing if l quick the damping on rear shocks? I was going to drill holes in piston a little bigger size. Is this a good idea? The only problem is it's a Traxxas Maxx lol🤪. Sorry bro lol. If you could hit me back thata be sweet thanks bro.
Hey Brother. Sorry I just saw this 👀. Bouncing during landings is usually from having under-dampened shocks, meaning the oil is too thin. I'd try going a bit heavier on the fluids first. You might need to play with the preload too. Try adjusting the shock collars up or down a few turns. Shocks always require experimentation to find a happy medium for different terrain, jumps,...etc. 🍻😎💪👊👊
What would it be like with grip tape. Mean ramp bro. Like a pro
Thanks so much Brother 😜. Grip tape is not a bad idea. Because the skids and chassis rub with higher speed hits, it would probably wear down or might snag the occasional loose chassis screw 🤔. Porch paint is another option. I used that to coat my mini ramp with for skating. It's takes the slip out of most all woods. 🍻😎💪👊👊
#BigBadaBoom
What do your fun as far as cooling in your cars ? Because you drive wide open like me lmao 🤣 and mine are over heating in my Kraton
I don't have any motor fans on my off-road rigs but I limit my max gearing and make certain my ESC fans are functional. I'll check temps routinely too 👍. My goal motor temp is around 150F, ESC around 130-140. Been using my buddy Ian's fan mod to preserve the stock fans with great success. No more busted blades despite brutal impacts. I left a link to it in the pinned comment a couple vids ago. 🍻😎💪👊👊
built the same as a skateboard ramp. to step for bmx
You know it Casey 😜. Built my first skate ramps decades ago using the same techniques. They were strong enough to launch with my dirt bike 😍. Big thanks to my shop teacher and older friends who showed me how to use tools safely and proper construction 🍻😎💪👊👊
how much was this roughly?
Around 250$ USD. That's more than double normal cost, but lumber and steel prices are super jacked at the moment. Fortunately, I have enough spare ply to build another ramp 🍻
how many rc cars you have?
Probably around 20 🤔. Around 15 are in running order. The others need electronics or rebuilding of some sort. 😎💪👊👊
NOTHING boots a car like one with these specs... Only problem is storage :)
Thanks Isaac 🤗. Storage isn't bad with the ramp upright on the wheels. Just need a garage or covered area to park it. 😎💪👊👊
outcast with no wing is kinda like yankee with no brim
Hey Rich did you know that their are two names gaininghouse hold recognition in rc house hold and they Rude dude81 and Rich duperbash keep sending them and we keep watching 👀lol
I've said it before and I'll say it again: the Outcasts look better with no wing 8)
I agree, but it help protect the truck during rolls and stacks. 🍻😎💪👊👊
Just do what us Skateboarders have been building for decades...
I've been skating since the mid 80's Jesse. That's where I learned basic ramp construction. Use to hit the ramps with my BMX and MX too. Same principles still apply. 🍻😎💪👊👊
@@richduperbash2966 Yes what was your first pro set up?
Cab xt boneite, rat bones, thunders, and of course 80's fluorescent grip, that was mine
@@jesseormond3202 grew up near San Jose and met Cab several times. Skated his original 12ft , ramp in East SJ. He was married to my soccer coach's sister later on 😂. Rode his board, Mark Gonzalez, Hosoi, and a mix of others 😍. Rode Independent trucks mostly. Street and vert 🤙
@@richduperbash2966 I knew when I see your lines at the skateboard parks they were not coming from an rc background!
Keep em up
Chris Miller and Eddie R from Alva were my first pros I met in Ontario Canada.
I can’t afford lumber
Yeah prices are so ramped up it's a joke 😂🍻😎💪👊👊
So which is the real voice lol
Yea right now is such a BAD time to build a ramp lol! At $121 PER board, its not worth it. But i l know that point is moot. This is to show how to build YOUR ramp haha
Yeah the timing is horrible 😂. Lumber prices have driven the average new home price up about 30k 👀. It was painful paying 3X what I should've, but my last ramp wasn't safe anymore either. Getting hit by an 8s at at speed is no joke. Not a risk I wanted to flirt with injuring myself or my friends. 😎💪👊👊
@@richduperbash2966 Yea you need something robust the way you fly haha!! The one I built is 4 ft wide, just the standard what you see on youtube, and good lord it weighs a ton lol I like the wheels concept here....easier to roll in certain locations 👍 I may modify my ramp to something like this 😁
@@RUZTY1311 yeah 4' wide is perfect 👌. The inner moulding and tail area of my van has a narrow spot, hence the 40" for easy loading. Definitely grab some casters. They're cheap and make rolling around a breeze. Easiest to use self tapping lag screws to lock them on.
@@richduperbash2966 Right on Right on!
That's Nice mate. But you need a van to move it hahaha. I put adjustable legs on my ramp and no sides it takes X maxx arrma my motorbike hahaha. I drive Subaru forester turbo of course and it takes ramp and all the toys no problems.
That's awesome Brother 🤗. Your ramp sounds nice 👍. Just sold my 2007 Forester XT STi conversion this past year 😝. It was the ultimate sleeper. Loads of fun too.🚀🚀😎💪👊👊
@@richduperbash2966 hahaha shore are a great car hahaha. Try loctite bearing mount on wheel hexes to take the play away instead of washers 👍🤙