How to SCRATCH BUILD a Balsa Electric Glider
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- Here I show from start to finish how to build an Electric Glider designed to beat a Radian from scratch.
Foil section used: SD7037
Balsa Wing Covering Tips:
• Balsa Wing Covering Tips
This Glider Crashed today, haven't been able to find yet it but I expect it to be destroyed.
TheRattleSnake3145 noooo it was so beautiful I am trying to make my own and is was looking again for som ideas
TheRattleSnake3145 have u already found it?
Floris Heuperman will have a look again tomorrow, it landed in very thick Mangrove trees and the tide was in at the time. I was walking in waist deep water muddy water in mangroves that thick it was about 5 -10 meters visability at points. Looked for about 1 hr but figured it landed in water so not much chance of finding anything usable.
I’m sorry buddy, what happened?
I think some kind of turbulence causing a tip stall, when I pulled out of it the wings couldn't handle the g's and one broke. Looked for it for around 6 hrs total and after the 3rd attempt (2 weeks later) it was found. much less damage than I expected. The wings have been strengthened and it has now been fully repaired. recovering has almost been finished, then I just need to reinstall new electronics as it was out in the weather for 2 weeks and I don't trust it even if it seems to be working fine.
I'm not a modeller but I find this video so inspiring. What a beautiful looking plane too, I was shocked to see your "I expect it to be destroyed" and that it ended up lost in a swamp and so glad to see that it survived! I look forward to seeing more footage of it. Thanks very much.
Awesome built! Thank you for the idea of wing part joiner with Motor and ESC connectors!
@@goldenfish77 don't forget , you still need to tape the wings on or use different method to secure the wings. The connectors are just to locate the wings.
@@TheRattleSnake3145
Thanks for the warning too! I hope you fly with this beautiful glider!
dude, that is fruckin awesome... brings back memories of building with my dad as a kid... that covering job is cool... looks like a bunch of solar panels
thanks!
mate that is frankly an awesome bit of workmanship, totally impressed ..
Great build tnx robin
I used to build models with my dad years ago and want to make one now. This is the best tutorial I have ever seen on TH-cam and beautiful model
That's a beautiful build. Thanks for sharing. The copper color and the blue osmokote are a great color scheme.
Thanks!
What a glider !!! great to see old school building !! warms me heart !!!
Excellent craftsmanship. Floats perfectly without the motor.
Jason Jackson thanks for your kind words.
Impressionant! Little wing load and great gliding capacity---Perfect Finish
Very nice build my friend. Looks like a hell of a floater.
thanks, and it is!
thanks, and it is!
wow. great video edit and gorgeous plane. loved the maiden toss. perfection.
lots of satisfaction when you see something you create working as you intended.
damn mate, that was a beauty, test throw was stunning, and a nice build vid.
Wow!! beautiful job and a fantastic finish.
You obviously took your time and care during the build and it shows.
Well done. 👍
thanks!
Wow what an excellent flying plane. Great build. That thing friggin floats!
Mate, very nice. Maybe I don't have to buy a Gentle Lady or Bird of Time, just make my own.
At our club, Logan, the guys kill their own Radians. Three major crashes in the past two weeks and two fly away's in the past six weeks. Yikes ....
Great to see you got her back. Keep up the great work.
Excellent!! It always amazes me when I come across a channel like this after so many years of balsa search history have gone by. No YT, I don’t wanna see this guy just killin’ it in the wind, I’d rather you suggest Dr. Pimple Popper. Subbed and added to the “Why the hell am I unsubscribed?” Checklist.
Beautiful and I’m a true fan of balsa but it’s only from a lack of understanding of the modern hobby to think this would come even close to the radian in terms of popularity and sales - folk don’t build anymore, they can’t even fly without complex stabilisation and airframes they can dispose of and replace with “just 2 screws”
Dude that is beautiful, seriously hats off and thanks for sharing!
Thankyou, sadly it crashed today and still haven't found it. If I do find it I expect it to be destroyed.
Great share, thanks. Not everything needs to be an ARF, nice replication of characteristics. Wing looks bigger than 2m, though.
Oh my god that thing is so stable unbelievable, it beats fluid drag.
It glides really well. Nice wing design. This thing might be able to sustain on solar power with a few panels fitted on the wing.
What a wonderful machine. A thing of beauty.
Excellent video and a great test flight - congratulations.
Funnily enough the tip I really liked (and may well 'steal') is using 4mm bullet connectors for anti wing rotation. I think they may also make neat hatch retainers, helped by my usual small magnets.
Thanks, mine were 3.5mm bullets, Don't forget to tape the wings on :P
i thought the purple coverings were solar panels.
you should do a solar plane
amazing fuselage from balsa. great colours!
+Wernerrrrr Thanks. After I uploaded this I realised I forgot to shop the bottom, which is black instead of metalic copper.
well done! Its so good, I thought it would just fly away at the test throw :)
Very inspiring build with Great Tips, Very well though out design Huge thumbs up in spades
Nice video and top effort on the glider...which I will call the RK.
Excellent build. You've got skills.
Amazing craftsmanship, thanks for sharing.
Beautiful build
Stunning build fella.
beautifully built and covered.
.Very fine workmanship.
Flies pretty sweet too.
Hats off to ya laddie. :)
Thanks!
Love to see a set of PDF plans, Great job!!!
+Kevin Matney I only have what I drew up sorry.
Hats off to u bro that was AMAZING! But seriously that was really good.
That`s a nice piece of design and workmanship. Seems to fly OPK too!!
Thanks.
Very nice build and vid. Liked and subbed man. Cool
That is a thing of beauty
Just amazed by your work
Awesome build
So cool stuff your design is also very good.
Fantastic build! Beautiful.
thanks!
Beautiful work.
Thankyou!
Terrific build! Thanks for sharing. Always interesting to see how someone else dose it. I especially liked how you used the electrical connector for the wing position. I hope you don't' mind if I steel your idea! LOL
Don't forget to tape the wings on :P
Beautiful build. Thank you for sharing.
Such a clean work, well done!
Something with that good of a glide ratio and the right mix of battery, solar, and capacitor would be exactly what we'd need for a network of solar aircraft for worldwide wireless internet.
awesome I thought you were gonna throttle up then lol great job
thanks.
amazing build dude!!! greetings from Italy.. i subscribe your channel !!
Sorry to hear that. Add a locator next time. Great build.!Only thing you forgot is what airfoil you used, how you see the wing incidence and CG determination.
What do you mean? He lost it?
Great instructional video. Thanks for sharing!
That's just beautiful ...
thanks!
Thanks man you gave some idea for my wing joiner using bullet connector
Make sure you tape the wing on with a low adhesive tape, the connector itself isn't enough to hold it on. just peel the tape off when you want to pack up.
Don't forget to use some tape to hold them on!
looks very professional!
thanks, I've definitely improved since my first plane.
Beautiful aircraft.
Well done, very nice build.
+RCHELIBUG Thanks, already on to my next build now.
Love your videos , such a great builder .
+Scott Thompson Thanks, Im always building something. At the moment im building an air/swamp boat.
great job! what an amazing glider! :)
thank you!
Nice work man.. Haven't seen an upload from you in a while. Looks like a dream to fly
+DCVINRC Thanks. Yea, been slack lately. I have 2 more scratch builds I could put up when the stuff is edited also a CL-84 tilt wing VTOL I'm keen to film, just waiting on good weather.
handles just as I was hoping.
Really good job
it looks amazing. can you show how you covered the wings in another video?
hello, I have a video titled "balsa wing covering tips"
on my channel that will help you.
Nice job
very nice work!!!
Amazing plane!!! Could you please make a video with all the dimensions so I could build a mini chuck version.
it's a fairly simple design so I suggest that you try your own design, you will have more fun and get much more satisfaction seeing something that you have designed and built flying well.
Any plans or at least some measuring moments so I can reproduce this model plan ? Amazing craftsmanship and awesome flight performance. Thank you for any feedback.
Holy schmoli! What a beautiful job you did! From scratch!!! One thing I don’t get is why you’d put such cheap/garbage servos in such a fine bird?
love it
Well done, indeed, its 10x better than a Radian for sure.
+FGDude Thanks. close to 50% more wing area and less drag than a radian. it weighs 30 grams more than a radian but climbs as good if not a bit better.
+TheRattleSnake3145 Dont forget to mention the looks ;o)
Its a nice glider I can see that by the first trow. Good job !
Beautiful glider! Any chance you will offer plans?
I wish you would make a set of plans and put them on so we could print them to build the glider, I think its beautiful. I live in Arizona usa. ron
honestly, if you have the skill to build this, you could most likely design it too.
Give it a go and you will have fun learning!
I'd like to give it a go!! You're right we can do our own designs, can you share just a bit of info on a few key dimensions like wing span, wing cord, dimension from motor mount to wing LE, and length of boom? I'd like to get these basic measurements just so I don't need to add a ton of ballast to get the balance on CG!
what I do to make sure I dont need to add any weight to get the cg right is make the fuse ahead of the wing longer than I think it needs to be. Then when the rear half of the plane is finished (servos and wire installed etc ), I temporarily place the motor and battery up front so I can adjust where it needs to be. Then cut the fuse as needed.
That way no weight is needed to correct the cg.
Wingspan is 2.5 meters
Cord is 28cm
Your materials will likely weigh different so your fuse length will probably be different but:
LE to motor mount = 29cm
LE to rear end on boom = 1.9m
@@wshurmatz1 just do like I do. find a plane you want to build and then build a plane that fits those measurements and Design. I haven't built any big gliders yet but I've been building small Balsa gliders from plans I find online. But I don't have a printer to print out the pages so I just take the measurements and draw the lines in myself by hand.
beautiful job.
She took to ths sky like a home sick angle! Edited: Nooo! just found out the fait of this beautiful bird
Beautiful glider!
I'm planning to build one myself, but I do not dare to build it by drawing wing plans by myself. Since I do believe in your experience, I'd like to ask you to recomend me some printable plans similar to yours..
thanks! I'be only ever built of what I have drawn up myself so I can't recommend any sorry.
The best way to learn is to do it yourself!
give it a try in a smaller scale.
I would also love to see a flite video of this, some slope soaring maybe?
there is flight footage at 10:33 . I don't live near any slope soaring sites sorry.
nice build bro
Buen trabajo de Aeromodelismo.... Saludos
Wow...I wonder what the glide ratio is!
that's very cool, the wings are only attached with the connector and the carbon rod?
do you have plans for it?
The wings are taped on with a low strength tape. that connector is just to locate the wing.
@@filippoorlando5175 I don't sorry.
@@TheRattleSnake3145 ok, i'm planning to build someting like this
To claim to be a radian killer is a big claim, its a great glider for a foamy, i believe you have done it. How is the penetration of this glider/ Your l/d looks to beat a radian by a bit. Give us more please. I am going to extend the wings of the radian by 2 to 3ft and see what happens. i will let you know thanks!!
penetration AND float can be seen in $2,000 DLGs To get both in a balsa electric poly, some tradeoffs will have to be made.
if you are modifying a radian , you should check out my triple radian videos. the one with the emergency parachute was fun.
The main spar should be located on the wings center of pressure and a D cell should extend back to the center of pressure as well to avoid the wing twisting under load which allows adding ballast for the conditions you will fly in. And might as well take advantage of using carbon fiber to make it stronger in the first areas to fail. Lot's of work to build a balsa wood glider from a pile of wood but it's the only way to try out new foils and wind shapes.
Correct, this would be ideal.
Everything you have just said would have substantially increased the weight of the wing.
You then mention adding ballast, when weight saving was the priority, there is no chance I would do any of those suggestions.
You can see another build of mine where I built more with strength in mind here: th-cam.com/video/RJSgMHVt_IE/w-d-xo.html
You did a beautiful job building your design. But nevertheless using a main spar on the ideal C/P location relative to the C/G (C/P changes with angle of attack) to prevent the wing twisting is a much lighter weight design alternative to using a D cell which is why low sink rate thermal gliders like the original OLY2 and Top Model's newer Ibis etc. don't use a sheeted leading edge D cell but always try to have the spar at the estimated ideal C/P location. Wing flex, such as induced tip washout to prevent tip stalling, can be achieved by tapering the wingtip ahead of the C/G to give the area of pressure behind the C/P more leverage and is part of determining the wing shape in relation to its aspect ratio and design parameters. Without added material weight required to prevent twisting on a wing supported ahead of the C/P twisting and therefore wing flutter and instability will be increased.
Ballasting to accommodate even a small change in the wind/direction will make the difference between winning and losing a contest using similar gliders flown by equally skilled pilots on average. Adding power and weight makes a neutral twist balanced wing even more important. The advantages of a main spar in the RC model scale is shown in building a very thin wing with a forward foil (a thinner modified airfoil) and comparing the flight performance to a similar thicker wing. I have seen an RC "thermal" glider often flown in high winds with a much higher wing loading than an OLY2 fool experienced pilots by it's thin wing providing an extremely low sink rate that seemed to contradict it's higher weight and wing loading in out performing the OLY2 in sink rate as well as other flight modes. Most things have been tried building RC aircraft and what we see is a result of trial and error and copying more than using applied mathematics that will show the same results done correctly. Going thinner due to having access to better materials allows for new exploration but the basic principles of support in relationship to material weight required remain. And as usual keeping it simple is generally the better way to do anything.
well done.
Super! (Latvia)
That's a brilliant floater, what are the rough dimensions of it, such as wingspan, wing chord and lengths, thanks ?
Thanks, Wingspan 2530cm Fuse length 1340cm wing cord 27cm
Nice build! What carbon tube are you using?
I really like it RS, though I would choose different colours. But balsa building is too complex for me. I work in a precision engineering works and have discovered that, after work, I can't be bothered with the finesse required in the details. So I'm more into foam board and no sanding. But I do like to think up problems and find solutions. I've not owned a Radian, though people say it's good. Hmm, maybe I should try and make something like yours here, but emulate the Radian's dimensions exactly, ie, span/length, just to see what it can do. I'm off out to sort out some more 6mm foam sheets today. :¬)
Thanks, If I had to do it again, I wouldn't have picked the metallic. it added 30 grams more weight then if I had chosen a normal colour.
The Radian is good, I prefer the normal Radian over the pro version.
I also have depron sheets for concept testing.
30g extra? Yowch!
I wouldn't mind buying a Radian one of these days, but I'm never one to leave things alone and I'd probably end up flattening the wings quite a bit and adding ailerons. :¬P
Oh, and I now find that I lied about the sanding, as I've just repaired, re-purposed a pair of Armin type wings that I extended to 2.5 meters. I used a "Mouse" sander with 120 grit extensively. I ended up using a bit of water sprayed on to the surface to eliminate 'balling' of the lightweight filler. It works a treat.
They are now 2.46 mtrs but with semi elliptical wing tips and fully glued in carbon tubes right at the top and bottom surfaces. They are ridiculously rigid, compared to any Armin job. And with a fishing rod tube for a tail boom and basic foam board fuselage I've started to discover what people mean when they talk about lift.
Though I'll admit that I didn't get fanatical about weight and covered most of it with glass reinforced tape. Well, we're approaching winter here now and winds are picking up, so the glider is actually quite fun as I already know It can take a knock. ;¬)
Good job, I like this video.
thanks .
Did you post your build on RC Groups ? i am guessing your wing root chord is 8 inches ? i am Most interested in your Leading edge shape of the wing , its very hard to tell from the video but i am guessing you are shaping the LE to achieve a more modern air foil ?? any little tid bit of info on that would be most Awesome
Sir plz tell me this details of this RC glider plane, like wingspan, fuselage length, motor kv, cg point and maximum weight ( including all electronic ). Plz reply me
Great Job
She’s a Beauty
Can you give me all the technical specifications of how much material is composed this model and how many ribs consists wing.
AWESOME. that's so smooth. can i get the the lines plan? i wanna build one.
nice job mate
Thanks!
Loved watching this video and the great flight characteristics. What wing profile did you use? I'd like to try this one out.
+Brad Dixon I cant think of the exact one off the top of my head but it was definitely a thermal soaring foil.
how i can download the plan for this aircraft??
Amazing.
How did you find the perfect wing shape? Beautiful plane!
Sweet build!
Earned you a sub ;)