Building Wooden Banca Speedboat - Part 7-firts Sea Trial and Error
ฝัง
- เผยแพร่เมื่อ 12 ก.ย. 2024
- This boat is an innovative build made of wood and marine plywood. It is inspired by speedboat style but engine are inboard. This is a non outrigger boat type in the Philippines. It is powered by 2 units of 18hp inboard engine.
Technical Characteristics
Length: 18ft
Beam: 5ft
Depth: 30 inches
Part 1-Hull frame
• Building Wooden Speedb...
Walkthrough of the frame explained at this • The frame concept of B...
• The frame concept of B...
Part 2-Wall
• Building Wooden Speedb...
Part 3-Fiberglassing
• Building Wooden Speedb...
Part 4-Painting
• Building Wooden Speedb...
Part 5-Steering, Canopy and Seat installation
• Building Wooden Speedb...
Part 6-Steering, canopy and seats installation
• Building Wooden Banca ...
Dapat pag ganyan mga bossing naka jetski type sana or water jet type ang propeller,, tas tinaasan kunti yong abante (Pamawong) naka incline pag naka sideview.. Pero mapaganda pa yan next mong gawa kasi makkta mo na now after sa trial kong ano dapat mga e improve sa ssnod na gawa.. Good luck boss..
Great boat... felt sorry for the duck, though!
Nice job 👏 time to go fishing 🎣
Thing about surface drives. A couple MPH or a few pounds could be all that's stopping it planing and running 40 mph. I'm sure it's worked out by now.
Gaming mo talaga sir, aabangan ko ang nxt mong gagawin, sana cabin boat naman😅
Soon Sir. Yan ang next build ko. Salamat po
idol you need higher engine rpm for speed., consider a second hand outboard engine, mas madali i launch,, nice boat anyway ^^
Pa English ka pa pilipino naman sinasabihan mo !
Sir tagpila man ni kung magpagawa maganda to sariling atin na bangka?And saan ito sa pinas ginawa?
sir 100-150k ang price sa ana na mga porma na finished na pero la pa na makina yan. Kaw na bili. kung ipagkage nating with double 18hp engine, nasa 200k. Davao o Iligan City Location Sir.
I love it, a low cost slowboat. How much fuel does it use per hour at top speed?
Greetings from Indonesia, the Aru Islands, Maluku province, on the Indonesian-Australian border, very creative, my friend, how to make a nice and unique boat model
Thank you for the appreciation and complements.
@@InnovationsMindChannel thanks again senior
Good shot guys, improve it.
Thank you for the compliment. Surely I will.
Nice job idol
congrats mga bossing..maayo pagka himo sa imong wooden speedboat
it's floats nicely great job, can't wait for the drawing plans
Galing nang pagkagawa mo sir napaka detalyado mula part 1 hanggang 7 sa hatak siguro sir bigger propeler or swap sa bigger engine
Salamat sir sa appreciation. Tama ka sir need to go a bit bigger na propeler. Other options is car engine.
Idol no skip ads matagal kona to inabangan heheh
Ang ganda master ng gawa panalo po...
galing...sir nasa magkano ang budget sa ganyan..maglalaro sa anong presyo? kasama makina.
mga nasa 150k-200k sir ang gastos kasama na labor, materials at 2 units na 18hp engine.
Salam sukses lanjut ber karya saudara ku tuhan memberkati
Ayos,matatag sa tubig ewan lang sa alon.
yes sir, lumalaban sa alon. stable sya. ito new sea trial th-cam.com/video/7j7VW2LwdMc/w-d-xo.html
Try surplus diesel engine like 4bc2.
@jeffrey Garcia, nrxt model sir try ko mga sasakyan na engine.
bahasa apa yg anda pakai tu,,english or thailand??
Npakagandang tingnan nakalutang at nkakatakbo na boss. Next video n ulit boss
Pagkatapos ng adjustment at improvement ng speed. Salamat Sir.
Dapat ang makina nya yong pang multicab tapos water jet
Should have built a boat ramp ...
Magkno b Yung ganyang speed boat
Hayranlıkla izliyorum başarıların daim olsun 😉
çok teşekkür ederim. Sadece kendine inan. kendinizi zorlayın ve gerçeğe dönüştürün. Desteğiniz ve videomu paylaştığınız için teşekkür ederim. Bir tane daha yapıyorum, daha küçük bir versiyonu ve ben buna james bond diyorum. yakında yükleyeceğim.
Bigger Engine! 😃
Yes. Considering for higher hp or bigger engine.
Hindi tugma ang body form sa makina, dapat mataas na rpm hpeed..bili ka ng outboard engine 50 HP, march yan.
Match
Try ko po in the next build. Salamat po.
grabe idol ang galing mo
Salamat po. :D
ano po yun gamit nyo na silencer boss?sa motor po ba yun?
Congratulations sa imong inovations. ASA man workshop mo Bai.
Salamat Bay. Iliganko Sir.
Feel free to suggest your expert idea on how to improve the speed. Susubukan ko Palitan ng kapay na 3/4 X 2.5 X 8.5 or 3/4 X 2. 1/4 X 8, Alin ang akma sa kanya?
If you know the weight, you can calculate the max. speed by weight per horse power, and the lenght of the water line. Also the pitch of the propellers need to be correct to RPM, hp and weight of the boat.
@@jimsoprano711 lets assume around 400kg weight
draft 5 inches
length of waterline 12 ft
boat dimension is 19 ft X 5 ft 25 inches.
i need to go to bit bigger propeller. currently using 2 blades 3/4 (thread) 2 inches (width of the blade thread) 9 inches (length of the props blades/leaves).
Try to change the engine on a 3 cylinder engine.... Remove the double engine ..mabagal yan.... D sila akma sa style ng speedboat...
Considering your suggestion. thanks
Wew! Congrats dad shane :)
Salamat po. :D
Magkano po abutin ng gastos sa ganyan at pano gwin he he
Taga san po kau idol magkanu inabot nyan ?
davao city po at davao oriental location ko. more or less nasa 200k po.
Sa laki ng boat mo dapat aralin mo yung jetski type na kung jetsky type yan mabilis yan atpalutin mo ng fiver glass
Kung outboard na motor kahit 40hp ayos nayan ok yung body ng boat mo sir kahit second hand lang na outboard sayang pera jan sa Chinese engine nayan.
Di ko afford sa budget sir. In the future pag meron na sapat na pera. In the meantime, pagtiyagaan ko muna. So far ok naman. Salamat.
Pwede jan makina ng CBR 400 honda
ayus yan sir
WOW Ang galing😊😊 boss pa share naman ng idea and Costing salamat sa sagot..😊😊😊
Salamat din Sir. Wala kasi ako blueprint, bali iniisip ko lang talaga. Nasa almost 100k gasto ko nito kasama wood, nails, epoxy, fiberglass and paint.
@@InnovationsMindChannel boss magkano yung kabuuan ng engine ?
@@bosszorokun6276 15,500 bili kò ng isa ng 18hp proquip so nasa 31k lang 2 units of engine.
Starej dobrej Vietnam :D
Taga asa ka sir?
Iligan sir
How fast did you get it to go?
it a bit slow, i think I run around 8-10 knots. 15kph, the propeller it a bit small and cannot give power. I will adjust and replace to a bit bigger size.
Kung engine kaya ng multicab ang ilagay?
Pweding pwedi. Downside kasi gasoline so mahal fuel. Pero goodside di mausok.
Anong haba nyan lods??
19 feet lods
Boss magkano lahat ng gastos ung ganyan.
Mga nasa 150k sir
Boss ok yan.aq bgo isip q fiberglass na bangka pagawa q.problema saan ba nakakabili ng fiberglass materials sa manila na mura lng.thanks
Manila, cebu amd davao. meron din sa lazada and shoppee. Polymer or polyklear na barnd.
Boss idol ayus kaau pagkahimo boss iyahang porma mura pod ug gikan other country bah nindot maka suroy kag acmac boss manlangit family naa mi mga panagat pod boss f ever makasuroy ka welcome boss
Naa mn gud me buhatonon dako nga panagatan nga sakayan pod boss pro kasko pa atlest f evr mkasuroy basin mkakoha mig dsign unsay maau buh ahaha manlangit family boss acmac .godbless laag skoang channel nga gamay boss ha pki support ko boss salamat godbless
Salamat Idol. Puhon Idol suruyon taka. Naka dikit nako sa channel nmo Idol. Puhon masaag rako diha.
saan pwedr mag pagawa?
Ako gumagawa. Iligan City location ko sir. Tawag ka sa number ko sir 09776974214
Magkano budget mo dyan boss?
simula ka mga 100k to 150k kasali makina at dependi sa engine mo.
magkano yang ganyan bangka
150k po Sir, with paint, canopy, seats, steering and dashboard pero di kasama ang engine. double engine kasi to na 18hp Proquip with electric start. more or less gagasto ka ng 50k sa engine at mga elisi, shafting etc niya. Made of wood, marine plywood and fiberglass.
Magkano eto boz
150k sir.
Hindi naman yan speed boat eh,,,, slow boat po yan kc mabagal tumakbo.
Unsa kaha ug makina sa multicab ibutang, and mas dako ma prop
Pwedi kaayo
Sir ilan Po sukat ung lapad netong Bangka at Yung haha po
19feet haba at 5ft ang width.
ang proportion migo sa length/with/height para sa inboard
19ft length
5ft width
27" side height
boss pwede magpagawa sayo ng ganyan boss ,kaso Lang sa cebu ako boss ?
pwedi boss, pwedi naman isakay mo sa barko.
@@InnovationsMindChannel sir magkano Kaya transportation Yan sa barko.?
@@fcjoxspider9005 siguro nasa less than 15k lang yan.
pila magpagaw a yan bosing
150k sir without engine
Bkt hns kna lng bumiii ng maliliit na car engine
Yun nga, sa susunod na projecct, mag diesel car engine ako. Hanap ako maliit o katamtaman lang laki at bigat.
16:51 Why is that guy carrying a goose like that?
In Pilipino (bisayan) beliefs, when you have new owned machine for transport, they need to slaugter an animal and spread the blood (they call it "Padugo") as an offering to the spirts.
Boss magkano nagastos mo dyan?
200k plus sir.
pila gastos ana idol pagawa q nimo
gastos ni og 180k Idol apil duha kabook makina na 18hp pro quip with electric starter.
Bossing mabilis pa yung 5 hp ko made of plywood
Thats great. Share mo boss para maraming matuto ng pamaraan mo.
New subscriber.
Hope maka palit ko ani pohon. 😊
Iponi lang sir para pabuhat ka puhon. Salamat sa subscribe.
Magkano po lahat na nagasto nyu po sir except po sa makina nya po?😊
Ang finished ull kasama mga canopy searts foam etc. Nasa around 150k. And 2 engine pati accesoriea around 50k sir.
@@InnovationsMindChannel dolar olarak hesaplasan ne kadar tutar tüm giderler
@@tahsinozden9207 yaklaşık 4000 dolara mal olacak. bu minimumdur. Dıştan takma motor için giderseniz, o zaman daha pahalıya mal olur.
how much po pagawa ganito Pano kayo ma contact
Magkano kaya ganyan boss?
150k sir exluding engine set up
San po ba location nyo boss?
@@winriepiano iligan City. Kayo po?
Ang layo Pala, iloilo ako
@@winriepiano malapit lang, pwedi lang ikarga mo sa barko o kaya itawid galing iligan City to Iloilo SIr.
Prang kapus ung pwersa sir naliitan ata s Elise sir,,
Oo sir. 3/4 x 2 x 9 yan. Kailangan adjust sa size. Anu maganda?
@@InnovationsMindChannel lakihan cguro ng kunti ung elise sir,,
@@InnovationsMindChannel ok n ung lutang nya sir eh ganda ng pgka gawa,,
@@alvindbuilders5803 lakihan ko sir, 3/4 x 2. 1/4 x 8.5 or 3/4 x 2.5 x 8, alin sa dalawa?
And ingay ng makina
E build mo pawte paano mag reverse para di kaw magpugong ng bugsay
need transmission for that. in the next build, ill put transmission so I could have reverse drive.:)
จักรยาน เร็วกว่า 555
เริ่มทดลองขับและต้องปรับเพื่อให้ได้ความเร็วของมอเตอร์ไซค์ :)
Ambagal
Pormang speedboat lng pero Hindi speed manakbo...dalawang makina na nga sobrang bagal...
Prototype palang kasi Bro. Pinag aaralan pa paano makatakbo ng mabilis sa murang halaga. Magandang simula na to sa mga bagohan para maka learn. Salamat sa input mo. Susubokan ko pa tong pabilisin.
Pano naging speed boat yan 😆 mas mabilis pa ako lumangoy diyan eh HAHAHAHA
Boss may cp number kayo gusto ko pagawa
09776974214