olá andré, estou estudando essa tela, já tenho uma mas não estou conseguindo fazer aparecer na tela a leitura do sensor dht22, vc poderia me ajudar? rio de janeiro
Hi. For me , Your article is very helpful. Now I understand DGUS logic. Only 10:50 You write VP 0x5000, next 19:13 You send data to address VP 0x5500. I'm using DMG10600T070_A5WTC. Thanks
But sadly they are also like X4 the price... In my country the 2.8 dwin is 450, the 2.8 nextion is 2500...so over x5 in my case😢, I'd rather have 5 displays over 1 you know
I would like to ask for some information. I selected a 4-byte variable (unsigned long int) to receive values on the screen. How do I write and send values from Arduino? Thank you.
Hello Friend, I need your help. I've being following your video So, the example is: Turn off and Turn on the led. When I start to try the serial port in the application, I push button (ON and OFF) on the display. The hexadecimal values I received are: ON: 2D 3E 55 FD FF FD 00 OFF: 2D 3E 55 FD FF FF 00 My Question is: Are the values correct? I have a doubt about that one. I hope your answer
Well the price point is quite good compared to Nextion but programming is more primitive. Hope some one will make a library for it. Do you really need the expensive acessory kit to program it?
Not necessary. You can very well connect TTL pins to your Microcontroller to program it. Or use an USB-TTL device to decode the HEX code at the port pins.
Thank you for wonderful explanation. If possible please do make video of read write and save arrays and pages functionality and keypad inputs also. Thank you
great.is there any way to send & display text in DWIN from arduino? I can see text show text display in DGUS but have no idea how to send String as HEX bytes.
Spot on ! Only one thing, after uploading code trough sd card, it booted up, but when I slide on the first screen it beeps but not going to second screen... any advice ? @Saravanan AL ?
Good afternoon, I have 2 pieces of such a display, one broke. How do I copy the program from the working display to my computer to flash it on the new display?
Hello, nice explanation. Is possible use this arduino code for Mega 2560 ? Because Mega 2560 have more Tx/Rx pins. There, by my opinion, is needed setting Rx/Tx pins for the comunication in Arduino code. Or how recognize Arduino Mega, which Rx/Tx pins is use for comunications ? Thank you for understanding
Hello Friend, congrats for your video, it is very useful. Friend, do you have some video where you can send data from Arduino - To - Display and this data is shown in the screen. It is possible. Do you have some material? Regards Nelson
An error occurred while upgrading the screen and it became a black screen that does not work Can you help me to restart it DWIN LCD DMG80480C050_03WTR can you help me I can't find a way to reset the screen again
In 10:30 you put vb5000 and in 19:19 different its 5500 ... is it magic ?? 😂 VB different and work with you .. but 3 day am still trying its not working with me i do all same
Hi, all works ok but the main screen BMP's do not load. ive tried puting the BMP's in folder and on the disk root but only loads the control function. any ideas and Thanks
![[LIVE] BABYMONSTER(베이비몬스터) - DRIP | 두시탈출 컬투쇼](http://i.ytimg.com/vi/UG05pxLGwzc/mqdefault.jpg)
Hi, my name's Andre, I'm from Brazil and I want to thank you for many project with Dwin. Your channel was very helpfull to me. Thanks!
olá andré, estou estudando essa tela, já tenho uma mas não estou conseguindo fazer aparecer na tela a leitura do sensor dht22, vc poderia me ajudar? rio de janeiro
@@marcos1alexandre2 Tudo bem, Marcos? Conseguiu progredir com a tela? Posso te ajudar se quiser...
@@FRO2010fuz muito obrigado por querer me ajudar mas ja consegui resolver o problema . Mas fico muito agradecido por tentar ajudar.
Hi. For me , Your article is very helpful. Now I understand DGUS logic. Only 10:50 You write VP 0x5000, next 19:13 You send data to address VP 0x5500. I'm using DMG10600T070_A5WTC. Thanks
I have same confusion. How is this working?
Ok, I checked this in project files, it is 5500 in the code as well.
The Nextion Displays are WAY easier to use
But sadly they are also like X4 the price... In my country the 2.8 dwin is 450, the 2.8 nextion is 2500...so over x5 in my case😢, I'd rather have 5 displays over 1 you know
Thats right, DWIN is cheap. App is hard at first time, then is Ok.
I'm using GIMP to create pictures. In GIMP You change target dimensions of icons.
I'm using GTKterm to send data over RS232. I'm sending byte by byte( 5A - Enter, A5 - Enter, ....)
I would like to ask for some information. I selected a 4-byte variable (unsigned long int) to receive values on the screen. How do I write and send values from Arduino? Thank you.
Hello Friend, I need your help.
I've being following your video
So, the example is: Turn off and Turn on the led.
When I start to try the serial port in the application, I push button (ON and OFF) on the display.
The hexadecimal values I received are:
ON: 2D 3E 55 FD FF FD 00
OFF: 2D 3E 55 FD FF FF 00
My Question is: Are the values correct?
I have a doubt about that one.
I hope your answer
Well the price point is quite good compared to Nextion but programming is more primitive. Hope some one will make a library for it. Do you really need the expensive acessory kit to program it?
Not necessary. You can very well connect TTL pins to your Microcontroller to program it. Or use an USB-TTL device to decode the HEX code at the port pins.
Thank you for wonderful explanation. If possible please do make video of read write and save arrays and pages functionality and keypad inputs also. Thank you
great.is there any way to send & display text in DWIN from arduino?
I can see text show text display in DGUS but have no idea how to send String as HEX bytes.
Sir, thank you very much for sharing you huge knowledge !!! You´re a very good Professor🙏!!!
Spot on ! Only one thing, after uploading code trough sd card, it booted up, but when I slide on the first screen it beeps but not going to second screen... any advice ? @Saravanan AL ?
Hello, do you have the diagram connection wire with arduino mega 2560?
Good afternoon, I have 2 pieces of such a display, one broke. How do I copy the program from the working display to my computer to flash it on the new display?
Hello Sir, Why is my Data variables displayed incorrectly when I create an ICL file larger than 136Kb? Thanks
Is it possible to to design a navigation system in DGUS if we want to use these displays for bike dashboard. If so Please help
Hi i have an issue, on the terminal its send the correct string but five times instead of one, what might cause this issue?
Thz for videos, I need to display them from an SD card image. MC displays a BMP image. is it possible
thank you so much for such clear explanation sir
Which program is used for image editing?
This is a greate work but I have question
Can I make ten buttons in a display?
Yes you can. Check out this video for 4 button , same procedure for 10 buttons
th-cam.com/video/PgoKV3dQAoQ/w-d-xo.html
@@SaravananAL
Thanks for all
how do we make tha esp32 data to show on dwin display
Hello Sir,
Wanted to send RTC variable data of date and time, what will be the Hex code for the same ???
Please drop Hex code if anyone knows
Maximum How many relays can be controlled with this module
What is the max File size of 32.icl?
Hello, nice explanation. Is possible use this arduino code for Mega 2560 ? Because Mega 2560 have more Tx/Rx pins. There, by my opinion, is needed setting Rx/Tx pins for the comunication in Arduino code. Or how recognize Arduino Mega, which Rx/Tx pins is use for comunications ? Thank you for understanding
Hello friend, Did you can?
Seems they have removed the 0.1” header on Als version and changed it to a proprietary connector to make you buy the expensive kit.
does return key control works for DMG80480C050_03WTR display?
in what program did you create the pictures? can the display be used at a height?
MANY THANKS how its possible upload the video ???
hi saravanan ,Arduino codes cannot be accessed, I think the site is not working. How can we access the codes?
Thanks for your wonderful video 👍
how can i connect dmg80480c050_03wtr with Arduino or NodeMCU?
Hi sir you can help me with LCD screen Dwin and stepper motor I'm need cod
Hi Sir, i can't connect dwin display with Arduino
Hello Friend, congrats for your video, it is very useful.
Friend, do you have some video where you can send data from Arduino - To - Display and this data is shown in the screen. It is possible. Do you have some material?
Regards
Nelson
An error occurred while upgrading the screen and it became a black screen that does not work
Can you help me to restart it
DWIN LCD DMG80480C050_03WTR
can you help me
I can't find a way to reset the screen again
Im sure that you can message to the hwin support with that problem
after plugging in SD card blue screen is not appearing and it is directly going to main screen , please help me
You need to change your sd card it has to be compatible with the screen
👏
Very helpful
In 10:30 you put vb5000 and in 19:19 different its 5500 ... is it magic ?? 😂 VB different and work with you .. but 3 day am still trying its not working with me i do all same
I had similar doubt
Ok, I checked this in project files, it is 5500 in the code as well.
i am very famous
stop that farmer
i am very farmer
stop that famous
Good effort...
Hi, all works ok but the main screen BMP's do not load. ive tried puting the BMP's in folder and on the disk root but only loads the control function. any ideas and Thanks