Smart Home Controller using DWIN HMI LCD Display & ESP32 (Display BME280 Reading & Control Relays)

𝗗𝗪𝗜𝗡 𝗗𝗶𝘀𝗽𝗹𝗮𝘆 𝗣𝘂𝗿𝗰𝗵𝗮𝘀𝗲 𝗟𝗶𝗻𝗸: www.dwin-global.com/
--------------------------------------------
𝐖𝐡𝐚𝐭𝐬𝐀𝐩𝐩: api.whatsapp.com/send?phone=8...
--------------------------------------------
𝐄𝐦𝐚𝐢𝐥: [e-mail]
𝗩𝗶𝗱𝗲𝗼 𝟭 𝗟𝗶𝗻𝗸: • Getting Started with D...
𝗩𝗶𝗱𝗲𝗼 𝟮 𝗟𝗶𝗻𝗸: • DWIN LCD Display Tutor...
𝗩𝗶𝗱𝗲𝗼 3 𝗟𝗶𝗻𝗸: • Using DWIN 7-inch TFT ...
𝗣𝗿𝗼𝗷𝗲𝗰𝘁 𝗗𝗲𝘀𝗰𝗿𝗶𝗽𝘁𝗶𝗼𝗻:
In this guide, we will learn how to use DWIN HMI LCD Display with ESP32 WiFi Module. Currently, DWIN HMI Displays are very popular in the Maker’s market. Using the DGUS Software we can design any UI and control the UI Content with a microcontroller. The 7-inch DMG80480C070 Display has a resolution of 800X480 pixels. We can interface the display with any with 5V compatible microcontroller board like Arduino, ESP8266, ESP32, PIC, 8051, STM32, etc.
For this demo, we will make a Smart Home Controller using DWIN HMI Display & ESP32 Module. The BME280 will read the temperature, humidity, pressure, and dew point and display the data on DWIN Screen. Similarly, we will also control a 4-channel Relay Module using the UI/widgets on DWIN Screen.
The Smart Home Controller Project using DWIN HMI Display & ESP32 uses a 7-inch DWIN LCD Display DMG80480C070 and other components. The project comprises the following steps:
1. Installing required Software & Tools
2. Designing the GUI of the Display
3. Upload project files to the Display
4. Interface sensor and relays to the ESP32
5. Make a UART communication between ESP32 & DWIN HMI Display
6. Monitor sensor data & Control AC Home appliances from this touch display
𝗦𝗼𝘂𝗿𝗰𝗲 𝗖𝗼𝗱𝗲 & 𝗪𝗿𝗶𝘁𝘁𝗲𝗻 𝗧𝘂𝘁𝗼𝗿𝗶𝗮𝗹: how2electronics.com/smart-hom...
....................................................................................................................................................................................................................................
Drop a like if you liked this video.
Don't forget to subscribe to our channel for more Electronics projects and tutorials.
Website: www.how2electronics.com
Facebook: / howtoelectronics
Instagram: / howtoelectronics
Twitter: / how2electronics

[@HEX-qw7qp]

Спасибо тебе индус за то что познакомил меня с этой компанией!

[@mramzadg]

Awesome 👌

[@rockzhang976]

Nice work!👍👍👍👍👍

[@Rendon276]

Is it possible to request data variables from the MCU?
What I see there is that the data variable automatically uploads to the MCU (arduino in this case) as it is updated.
The question is, can that same data be requested by arduino. ie You send a command via the UART and the DWIN returns the data of the requested variable?

[@theexperimentlab7887]

Nice 🎉🎉

[@prasanthchigurupatii]

Please explain in MPlab, it will be great

[@nonsquid]

This isn't a small incremental step for the Arduino, this is a GIANT leap.

[@arungarg1997]

Can I add total 8 relay in this project

[@badushashaik8429]

for beginners this is critical to understand, you need to explain little parts of the gui

[@MrAlsan]

Awesome Smart home 🏠 Dashboard 👍

[@zazenergyli4112]

Hello, We are committed to manufacturing and developing high-quality smart TFT LCD modules, the software is similar to Dwin, and the quality is better. Please check our website www.stoneitech.com/

[@yuvarajs1530]

Hello, do you tested DWIN HMI LCD (1024x600 or 1024x768) with ESP32?

[@tienat7403]

Is there any demo of stm32 with dht11 showing on dwin screen?

[@kamalkamel7559]

nice!!

[@raystonrizwan7800]

how to get the adress so that i can display water level on dwin what adress to set please tell me

[@electronics2.075]

Can u tell me how to write float value on dwin display

[@kabitachand2578]

👍👍👍

[@arungarg1997]

Hello in my project dwin rx pin work with 16 no pin and relay doesn't work plz help

[@iniinfoboss3463]

Can hpa be changed to pa?

[@dominicapong4952]

Please how can I make a dynamic UI with this display?

[@MohammadAli-ni3zk]

how to write float value?

[@ssmgarhakota5653]

firmware not updated in lcd even it is present in SD card but its shows all files are 000 size. show to burn program in lcd .

[@nvn93]

What software do you create images and icons with?

[@rockzhang976]

support PS, AI etc.

[@sadamhussain816]

Hi!
You have entered 6100,6200...etc for text
I'm working with dynamic curve in dwin dgus software.
how chould i define address for curve?? Please reply

[@sudhakars8703]

Please make an video for oxygen monitoring system for home with oxygen sensor - OOM 202 or any other sensor

[@HowtoElectronics]

Ok i will order it someday and build it.

[@bodziobran]

Is this display 3.3V powered ? Is it safe to connect it to Esp32 ?

[@Fantet-lh5wv]

Of course no . VCC need to be powered by higher voltage . The rest connect to esp32

[@znkc-dn5pp]

I watched this video and followed the relay part. However, the background does not appear and only the buttons are displayed on the screen. As the background, it seems that the default background in dwin comes out. Does anyone know how to solve it? Please

[@raystonrizwan7800]

bro can u help me out with this dwin hmi project please 😢

[@YogeshPuriLevitation]

Unable to upload on Arduino board with modified pin

[@YogeshPuriLevitation]

I want to display 5v with 3 decimal places.
Please guide me. Thanks in advance