Protecting my Supra with Lanoguard DIY Rust Protection | Kit Review

In this video we use the rust protection kit from Lanoguard to help protect the supra during the UK's cold weather.
This is a comprehensive DIY kit that comes with everything you need to get started. If you are interested in a follow up video, let me know and I'll post one a few months down the line to see how it is holding up.

[@CRD90]

Let me know if you're interested in a follow up video in a few months to see how it's holding up.
Here is the link to the kit used in the video:
www.lanoguard.co.uk/products/lanoguard-vehicle-underbody-and-chassis-care-kit

[@aurimasmaldzius5345]

Definitely am ! looks like a nice and simple budget way of preventing rust in a pinch while you save up on a full undercarriage restoration for a nice vehicle light the supra, gonna do this on my 300zx for sure before winter sets in! Did you have to clean underneath much ?

[@CRD90]

@@aurimasmaldzius5345 not too much, I just used a wire brush to get rid of any loose bits

[@geoded]

Even after you corrected by putting the nozzle back on you were still using it on the wrong setting. If you tighten it mostly on then you get a fine mist instead of a concentrated jet which makes it considerably easier to cover your vehicle.

[@CRD90]

Thanks will keep that in mind for this year 👍🏽

[@rabmc]

I did my re-coat of Lanoguard the other day on my e46 m3, so basically this is my second year and I really do find it a bit of a pain doing it on axle stands. That being said I gave my car a quick wash underneath before doing it and I found it was still beading water from last year.

[@adamkhan5274]

Be interesting to see how this does. Ive got an Audi Ur quattro that will need to get underchassis protected when its out of workshop

[@levelcrossing150]

Looks like good stuff. The best way to get the jet to work is to adjust it while you spray. You need a heavy mist more than a jet. Spray kitchen cleaners all work in the same way.

[@A4ANT]

Agreed that nozzle needed adjusting to a fine spray
everyone I seen sprays it on with not a drop landing on the floor

[@ams0876]

The reason why it’s tethered is because the bottle stays upright for continuous spray, you should’ve got a pressure sprayer.

[@SuperMARKNORMAN]

how many liters did you use doing this?

[@CRD90]

About half the bottle