1.5 million views, and probaly 1.2 million taking credit for your video and teaching lessons here. that means this was a awesome video, well done. thanks man.
_Just stumbled across this vid. Yep, I had this happen 6 months ago on my wife's Pontiac GTP. She had burnt the dust boot around the caliper piston and blued the rotor, probably made it hard as diamond xD. I bought a new caliper, rotor and pads. Like you, I couldn't get the caliper to budge until I loosened the bleeder. I went back to Autozone and bought the new flexible line and everything's worked like normal since._ _I took the old line to work with me (Ind Maint Tech since '88) and performed an autopsy on it and found the inner liner had split and folded backwards at the crimped hyd fitting, at the bracket (i guess because of it flexing ). And yes it was acting like a check valve, just like you said._ _I know these new Poly-Lined hyd hoses protect Industrial systems from rubber debris in sensitive systems, but they're not designed to be flexed on a regular basis, like they are in autos. Like most all plastics the Poly liners get brittle over time._ _I'm sure your vid will help thousands of people. I think during the next oil change/tire rotation, I'm going to replace the passenger side flex line also._
Wow! I'd give this two thumbs up if I could! So far one of the most detailed and best explained videos on the subject I've seen. Thanks for taking time to share this!
finally some new info for a nightmare problem, after changing suspect calliper with used part still rotor was seized solid now i will try hose replacement as a last resort
I remembered watching this when you originally posted it, and referred back to it this week. Turns out I had a bad hose on my old Town & Country minivan. You do a great job of calmly, methodically diagnosing problems. I would have figured it out on my own, but not without a lot of head scratching and wasted time. Thank you for making these wonderful videos! I always look forward to them!
How likely would a brake hose get stuck and act like a check valve? If it ever did would it make any sense to just blow out the hose using compressed air and re-use? Thanks.
RadioRex72 I have a front brake hanging up on our '95 Buick Riviera, it's overheated one of the rotors and caused it to warp more than it already was. I noticed that when I let off of the brake pedal after a stop that the brakes gradually release. I have a feeling it's a bad front brake hose but I'm going to check everything.....And he does explain things well, "I like the way he talks"! Lol, he kinda reminds me of the way Joe Namath sounds.....
Thanks for taking the time to make this video. I've replaced everything but the hoses, lines, and expensive stuff and still dragging. Apparently this is fairly prevalent in Ford F150 in the 2002_2006 or so era. As is brake line rust. So here comes the penetrating oil and trip to the ijit auto parts place for hoses..... Thanks man, nice troubleshooting and video!!!
some very useful tips, thanks...that gravity bleed is something I've never seen before so for me working on my car by myself most of the time that is very useful...
Thanks! Great video, and a natural teaching style! This is helping me get my work truck back on the road! I could watch you working on cars and talking about it all day!
Changed the caliper. brakes were still sticking just on one side. I was pulling my hair out then found your video. it was the hose. thank you very much. problem solved
Thank you greatly! I've been trying to figure out where I'm having problems for 2 days now. I haven't been able to find a single thing. Your video is the only thing that has helped me and you answered everything I needed to know. Thank you again!
Thank you so much for this video. My front right caliper got stuck yesterday and happened before two years ago. Now I have some leads on where to start troubleshooting.
Hi Guys. Old mechanic here, managed brake shops that got to remedy jobbers work that was no good. NEVER reuse a dodgy hose. The very first comment provided is gold.
Thank you, my old reliable Malibu 2006 got the same problem, I replaced both front hoses and problem solved, next I will replace the two rear hoses too just in case, after all they all are same age. Thank you.
Good eye Ziggy . I saw it on the video too, The rotor is loose on there. I took it all apart and re lubed the slides, then realized the pads were wore on a taper. I think that may be doing it. Thanks for watching .
I was going to comment about the uneven slider pins movement also. And not to be a broken record if a bunch of people already said it . Then I saw this comment and apparently you caught it. I just ordered that permatex silicone brake lube. Its supposed to be good to 3000F. and wont swell the rubber boots on the sliders. I will find out after time. I did alot of research before I decided on that specific type. Hope I made a good choice.
Wilber that is a great way to bleed the brakes, I like it. I just greased the pins and it seems to have stopped the front left brake binding, if it sticks again I will replace the hose and caliper and use your method of bleeding the brakes.
I recently replace a caliper on a 95 dodge b2500 van and was still having issues. Your video pointed out my mistake. I hate to admit it but I left off one of the copper washers on the banjo fitting... Thanks for the video,helped me fix my error. Now to bleed the entire system...
This is really helpful,, it was my hose,,,good on ya bro for doing passing the knolage,,, ,i have a feeling there will be a seat in Valhalla reserved for you,,🍀
I’m still amazed at the banjo design and how 2 copper washers can stop brake fluid from leaking. If I was designing it I would have had a screw down fitting like on the other end of the hose has.
Thank you for posting, I am getting ready to replace the brake lines and 're-work my caliper' ~ this video is helpful ~ I suspect the brake line, but (have all of the parts) to proceed further if needed.
awesome video and a lot of very important details comes from a pro tech and deserve thump up from me and add % 100 on top of it ,thank you very much master tech.
Great video; thanks for sharing! I just replaced both front brake calipers/brackets on my son's 2007 Toyota Corolla and was able to verify the left caliper was in fact the culprit in this case.
I had same problem. Made same fix, still had same problem. On a hunch I pulled parking brake release....fixed it!! No my parking light indicator was NOT on. 2008 Silverado. It was barely barely engaged but apparently enough to grab the driver's side front wheel.
thanks..I am fighting a problem with fluid leaking out around the copper washers and hose/banjo bolt.I replaced the caliper since I saw a defect around where banjo bolt goes thru and also tride new washers with the new caliper and it still seeps,but less.Never had this before.Only option is to try a new banjo bolt and or a new hose.Fluid is not coming out of hose or it's pressed on fitting.
+newyota1 Would think it would seal with the copper ones , if every mating surface, on both sides of the washers looks good , clean and new washers, is there a crack someplace .
I gravity bleed 90% of my brake hydraulics...Is that a floating rotor...?..looked like the top was pushing a little more than the bottom..Nicely sorted mate.
Great video, very well explained, too bad no one in the comments knows how drum brakes work, ah well they are relics now a days to the domestic industry
Great Job ! Never Would Believe The Brake Line Would Swell THANKS this Vid Helped Me Diagnose My Issuse Which indeed was The Brake Line !!! After removing the Brake Hose I blew compressed air Through the new and the old Brake Hoss and the differance was Dramatic! Night and Day !!! Was so fustrated because the hanging caliper seemed like the bearings Where bad , but they were not bad ....spent 60+ bucks to learn that lesson Additionally Becareful when disconnecting the hard brake line from the body Mined needed 12hrs and some heat applied before i felt confident enough that I would not Break that hard line while disconnecting the flexible brake hose GOOD LUCK all and THE LORD BLESS YOU #JesusIsTheAnswer
Had the hose /acting as a check valve issue before.Of course I thought it was the caliper like you said until hours of frustration and two calipers.Long before you tube could help me.
Thank you sir!!! This is probably the best informational video I've seen on here don't skip steps and you take the time to describe what you're doing.. One question what is gravity bleeding and how do I do it? Does car have to be running? I'm guessing with cylinder cap off not running
Gravity bleed i loosen master cylinder cap . then open bleeder and let fluid run . just do not let master cylinder run out of brake fluid. no need to start car.
Awesome information and saved me a lot of grief low and behold it was the the hose great video the clamp on the control arm had rusted up and restricting the flow all good. Thank You
Nice video. I have subscribed. The mechanic changed new master cylinder and bled but still have spongy brake sometimes, so I guess it is the caliper and maybe hose. Most of times I get spongy brake when making left U turn while slow driving. Any advice please?
I have a 2005 Ford E150. I cannot find the problem of my front brakes dragging heavily. So far, I have replaced the master cylinder, calipers, and brake lines from the caliper to the connection on the body frame. I have not replaced the brake pads, as they are close to brand new. I also did not change the rotors, as they look pretty good. My ABS light does not go on, and the fuse is good. I have followed your utube and tried everything. Before the white coats come and get me, please help me if you can. Desperate Ron
If you have new calipers , we will assume it is good and the slides are free . thinking it has the slides in caliper . If slides are in caliper bracket then make sure they move in and out free. . You said brake pads look good . but do they slide freely . If they go into caliper bracket , make sure they slide around by hand . If attach to caliper then they will be fixed there and caliper would be the sliding part. . So make sure all the mechanical parts are in good working order . if so then see if holdin fluid pressure , by releasing bleeder . But a lot of tines dragging braks that one can still drive on is a slide stuck or pads stuck if they are the ones that float in caliper bracket .
Great video!!! I have watched my share as I typically do but this video was thorough and clear . I feel confident I can do the job and not have doubts I will do the job correctly. Thank you
I had both front rubber brake lines collapse on my 95 dodge neon. I went through a brake rotor and 2 sets of pads before I figured it out because I'd never heard of the line doing that.
Text my brakes marotta McCaleb and my brake lines on one side I replace one brake line two years ago for having the same problem when I run the car or truck for an hour that's the side that I just replace the line and it's grabbing its this is grabbing my brakes my brakes start smoking a Dodge Dakota 1999 pickup I need help finding the problem everything is been changed on the front
Thanks-I just got a new banjo bolt to install.Hope that fixes it.If not last thing is hose.Really can't see anything wrong there though.Problem is very small.
Thank you for making this video but I follow all steps and was trying to stop at a red light after doing about 45 and the brakes went out and i smashed into a mini van. Any ideas?
Thanks for the video...I just bought a 91 oldsmobile station wagon and the front brakes were not working at all..I put on a set of new caipers and pads..plenty of brakes now but the driver side was sticking and causing the car to pull to that side...also it would stop sticking sometimes but then it didn't work at all because when braking the right would pull and I had to turn the steering wheel to the left to keep the car on the road..I exchanged the driver side caliper for another because I thought it was defective but the newest one is doing the same..with the wheel off if I hit the brakes it gets tight and will not release until I open the bleed valve a little..then it spins free..the rubber line is new looking but I took it off and I could shoot air through it in both directions...my ABS light is not on but I wonder if it could be a problem?I might try and bypass it because that thing looks expensive!...I don't think the master cylinder is bad because the other front wheel is working good..could it be that I don't have the system bled good enough?...I am by myself and have to wait for my neighbor to pump the brakes for me..if you have a minute maybe you might think of something I didn't..thanks
You say it sticks until you loosen bleeder . . Next just to be sure do it again and loosen the metal line going in to the hose , on master cylinder side , if the caliper releases then hose is good , if not bad , if releases then keep going and loosening fittings till you find where it releases . it may act different with fluid pressure on it than with just air . I would not think air in system would stop caliper from releasing. A lot of times if top is off master cylinder and you loosen a bleeder it will gravity bleed on its own . that is how i do a lot of them .
great step by step visual video. I rely on these a lot. I do have a problem I can't find. 93 bronco. and BOTH front wheel hubs / lug nuts are so hot after driving short in town that you can't touch them. To fix I have replaced (on both sides) : pads, rotors, calipers, rubber brake hose from caliper and master cylinder. since the lug nuts are hot from smelly hot brakes on BOTH sids, I believe it has to be up at master cylinder. Could it be the metal brake lines ? Could it be the metal valve conection point at mastercylinder? I did not replace that nor did i replace the metal brake lines. This is driving me nuts. I have put 700 miles on the new pads/rotors calipers... still getting too hot like brakes are dragging.. any ideas?
SURE thing, im doing a mustang gt today that sat a long time ,very stuck ;pins two broke off in the hold down , welp back too the grind good info keep em commin.
Ive got a heat issue on both front rims and one rear. since its more than one wheel, could it be the ABS or just air in the line? I did take fuses out of ABS system but its still hot.
Prob not the abs unit . Only way to know for sure is to look and diagnose them . Could be calipers , caliper slides , pads not moving free , brake hose , Would need to see if something was not moving free , or if fluid pressure is not releasing , Could be abs unit , but many other things go wrong first
I bled the hole system and my pads are sticking to rotor, what would it be? The piston doesn't retract like 2 or 3 mm but when i push it, it retrack very easily. Whats the problem?
Are the caliper slides free , depending on the vehicle could the pads be stuck in the caliper bracket , If you push the brake pedal and release it will not move far , but just far enough for the rotor to turn fairly freely .
I too noticed that the top of the caliper was moving more than the bottom... I wonder if the bottom caliper pin might have had some rust in it, or not enough lubrication, and was sticking a bit?
I noticed that too. I thought that looked odd. Also, it was recommended that brake grease be used to lub slides. That is not recommended because the boots on the slides are a rubber product and brake grease a petroleum product will dissolve rubber over time. Only high temperature silicone based grease is recommended for caliper slide bolts. Silicone will not dissolve rubber boots.
+Ken In Atlanta I guess i did not know they made non silicone brake grease . Not sure why it looked that way , watching vid i agree it looked like one was moving more than the other , but both were cleaned and lubed , but it does look odd .
+wtbm123 Thanks for the followup. I should have started by saying that I always wondered how a hose could act as a check valve. You did an outstanding job showing how that could occure. I live in the south and the under side of cars down here look almost brand new so I'm going to suspect slides and calipers first before brake hoses for sticking caliper diagnosis. Here are two silicone products that work with caliper slides. 3M 08946 Clear Silicone Paste and Super Lube 92003 Silicone Lubricating Grease with PTFE
This video was very helpful especially when you showed how the brake caliper is supposed to move when you mash brakes. Thank you for sharing.
I've never gravity bled brakes before... always had to have someone apply the footbrake a number of times.. Great clip.
I do most by gravity , Thank you for stopping in and commenting
Ive been working on my own vehicles for a long time and never knew the hose could be the problem awesome video thank you
Thanks for watching and commenting
1.5 million views, and probaly 1.2 million taking credit for your video and teaching lessons here. that means this was a awesome video, well done. thanks man.
Thank you for the comment and the info
_Just stumbled across this vid. Yep, I had this happen 6 months ago on my wife's Pontiac GTP. She had burnt the dust boot around the caliper piston and blued the rotor, probably made it hard as diamond xD. I bought a new caliper, rotor and pads. Like you, I couldn't get the caliper to budge until I loosened the bleeder. I went back to Autozone and bought the new flexible line and everything's worked like normal since._
_I took the old line to work with me (Ind Maint Tech since '88) and performed an autopsy on it and found the inner liner had split and folded backwards at the crimped hyd fitting, at the bracket (i guess because of it flexing ). And yes it was acting like a check valve, just like you said._
_I know these new Poly-Lined hyd hoses protect Industrial systems from rubber debris in sensitive systems, but they're not designed to be flexed on a regular basis, like they are in autos. Like most all plastics the Poly liners get brittle over time._
_I'm sure your vid will help thousands of people. I think during the next oil change/tire rotation, I'm going to replace the passenger side flex line also._
Thank you for watching and commenting
Thanks for sharing the autopsy report. I was gonna do the same thing lol.
Wow! I'd give this two thumbs up if I could! So far one of the most detailed and best explained videos on the subject I've seen. Thanks for taking time to share this!
finally some new info for a nightmare problem, after changing suspect calliper with used part still rotor was seized solid now i will try hose replacement as a last resort
Hope it helps
I remembered watching this when you originally posted it, and referred back to it this week. Turns out I had a bad hose on my old Town & Country minivan. You do a great job of calmly, methodically diagnosing problems. I would have figured it out on my own, but not without a lot of head scratching and wasted time. Thank you for making these wonderful videos! I always look forward to them!
RadioRex72 Thank you for the kind words , Glad you got her all fixed up.
How likely would a brake hose get stuck and act like a check valve? If it ever did would it make any sense to just blow out the hose using compressed air and re-use? Thanks.
It happens a good bit . The inside comes apart , collapses and blocks the flow . Only way to fix is replace . Thanks for watching and commenting
RadioRex72 I have a front brake hanging up on our '95 Buick Riviera, it's overheated one of the rotors and caused it to warp more than it already was. I noticed that when I let off of the brake pedal after a stop that the brakes gradually release. I have a feeling it's a bad front brake hose but I'm going to check everything.....And he does explain things well, "I like the way he talks"! Lol, he kinda reminds me of the way Joe Namath sounds.....
great vid. my 2005 Malibu maxx had the same problem
Thanks for taking the time to make this video. I've replaced everything but the hoses, lines, and expensive stuff and still dragging. Apparently this is fairly prevalent in Ford F150 in the 2002_2006 or so era. As is brake line rust. So here comes the penetrating oil and trip to the ijit auto parts place for hoses..... Thanks man, nice troubleshooting and video!!!
Best video ever I was glued to it till the end
The rotor guard will sometimes get hit by rocks and well sound like your break is dragging. I just bend it back a little bit and no more sound
THANKS MAN. Many People will save money and appreciate this and other helpful videos for many years to come.
Glad it was helpful!
U can always tell if a mechanic is good by attention to detail. This guy has my respect.
Gene Friedman devil into details suttle
some very useful tips, thanks...that gravity bleed is something I've never seen before so for me working on my car by myself most of the time that is very useful...
Thomas T Thanks for watching and commenting
Me Too, gravity bleed,..I am liking that !
Gravity bleeding is never a good idea. Especially if it has abs.
Thanks! Great video, and a natural teaching style!
This is helping me get my work truck back on the road!
I could watch you working on cars and talking about it all day!
Good video
Changed the caliper. brakes were still sticking just on one side. I was pulling my hair out then found your video. it was the hose. thank you very much. problem solved
Glad it helped
I replaced the hose, caliper and master cylinder and front left is still sticking. Can't figure it out.
Thank You Thank You. Everyone who is not a car machanic, needs you as a best friend or a good neighbor at least.
Thank you glad it helped
defenely one of the best videos I have ever seen about calipers and brake lines ...awesome explanation
Wow, thanks!
Thank you greatly! I've been trying to figure out where I'm having problems for 2 days now. I haven't been able to find a single thing. Your video is the only thing that has helped me and you answered everything I needed to know. Thank you again!
Glad I could help!
Best brake caliper video instruction.
Glad you think so!
The best and full detailed video for the beginners or professionals to do correct job
Thank you
The accent somehow makes him more credible
lol
If you undo the bleeder screw and it squirts out then it would be the brake hose it's not letting the fluid out
Very good video. You are the man of brakes.
Thank you so much for this video. My front right caliper got stuck yesterday and happened before two years ago. Now I have some leads on where to start troubleshooting.
Glad it helped
Hi Guys. Old mechanic here, managed brake shops that got to remedy jobbers work that was no good. NEVER reuse a dodgy hose. The very first comment provided is gold.
Thanks for stopping in
Good info. I didn't know about diagnosing the brake lines and how that could make the brakes stick. Thanks.
Thanks for watching and commenting
I always like to see the dirty fluid going back into the bleed bottle in the first instance. Good work.
Thank you! Cheers!
Thank you, my old reliable Malibu 2006 got the same problem, I replaced both front hoses and problem solved, next I will replace the two rear hoses too just in case, after all they all are same age.
Thank you.
Sounds good
Good eye Ziggy . I saw it on the video too, The rotor is loose on there. I took it all apart and re lubed the slides, then realized the pads were wore on a taper. I think that may be doing it. Thanks for watching .
I was going to comment about the uneven slider pins movement also. And not to be a broken record if a bunch of people already said it . Then I saw this comment and apparently you caught it. I just ordered that permatex silicone brake lube. Its supposed to be good to 3000F. and wont swell the rubber boots on the sliders. I will find out after time. I did alot of research before I decided on that specific type. Hope I made a good choice.
Wilber that is a great way to bleed the brakes, I like it. I just greased the pins and it seems to have stopped the front left brake binding, if it sticks again I will replace the hose and caliper and use your method of bleeding the brakes.
Thanks for stopping by and commenting
I recently replace a caliper on a 95 dodge b2500 van and was still having issues. Your video pointed out my mistake. I hate to admit it but I left off one of the copper washers on the banjo fitting... Thanks for the video,helped me fix my error. Now to bleed the entire system...
Easy to do , main thing is you figured it out
@@wtbm123 Right on buddy! Thanks! :)
Looks good- no leaks!
Thank you
Great video. Instructions were clear and thorough
Great video. Helped me trouble shoot bad hose.
Thanks for watching and commenting
This is really helpful,, it was my hose,,,good on ya bro for doing passing the knolage,,, ,i have a feeling there will be a seat in Valhalla reserved for you,,🍀
Thanks for watching and commenting
I have just replaced the four brake callipers on my 1995 Rover 820 si with remanufactured ones, nice video I have enjoyed watching it.
Thanks for watching and commenting
Your video is excellent, your explanation and tips are outstanding, great communicator, good use of vocabulary!
Glad it was helpful!
I’m still amazed at the banjo design and how 2 copper washers can stop brake fluid from leaking. If I was designing it I would have had a screw down fitting like on the other end of the hose has.
The banjo fitting is pretty strong and needs to be as wheel is always turning left and right . Thanks for stopping in and commenting
Great Straight up Video Thanks Awesome Job nice and gravity bleed when you don't have a helper!
Thank you
Nice job clear and straight away in your presentation
+Manny Vilar Thank you
Thank you for posting, I am getting ready to replace the brake lines and 're-work my caliper' ~ this video is helpful ~
I suspect the brake line, but (have all of the parts) to proceed further if needed.
Thanks for stopping by
Hey hey hey
I saw a dribble of brake fluid.
Thanks for bring us along on the repair. 😁😁😁😁
Thanks for watching and commenting
Thanks for this video! It gave me the little details needed to successful complete my brake repair on my 2011 jeep patriot!
Glad it helped!
awesome video and a lot of very important details comes from a pro tech and deserve thump up from me and add % 100 on top of it ,thank you very much master tech.
Glad it was helpful!
Great explanation, and video work. Will use it to help me fix a stuck caliper tomorrow. Thanks for taking the time to do stuff like this, subscribed.
Caleb Hewlin Thank you
of course it was just another few bolts to fix the real issue thanks for the info
Thanks for stopping by
Great video; thanks for sharing! I just replaced both front brake calipers/brackets on my son's 2007 Toyota Corolla and was able to verify the left caliper was in fact the culprit in this case.
Glad it helped!
Great video helped me sort my motorcycle brakes. Thanks.
Excellent instruction...Simple, clear and easy to understand.
Thank You
Very helpful and well made. Thank you!
+Rockuhill Thanks
Very good video, sir. Answered questions that a few others didn't!
Thank you for watching and commenting
I had same problem. Made same fix, still had same problem. On a hunch I pulled parking brake release....fixed it!! No my parking light indicator was NOT on. 2008 Silverado. It was barely barely engaged but apparently enough to grab the driver's side front wheel.
thanks..I am fighting a problem with fluid leaking out around the copper washers and hose/banjo bolt.I replaced the caliper since I saw a defect around where banjo bolt goes thru and also tride new washers with the new caliper and it still seeps,but less.Never had this before.Only option is to try a new banjo bolt and or a new hose.Fluid is not coming out of hose or it's pressed on fitting.
+newyota1 Would think it would seal with the copper ones , if every mating surface, on both sides of the washers looks good , clean and new washers, is there a crack someplace .
Learn something new everyday, thanks for posting this.
Thank you
Great video! I have the same issue with my Ford Edge. Parts are on order and I'll be changing them out tomorrow.
Thanks for watching and commenting
Straight to the point. Awesome
Thank you
If you're changing caliper and line can you attach the new line to the new caliper before installing new line?
You could , but to me it seams easier to attach hose to caliper at banjo fitting last .
I gravity bleed 90% of my brake hydraulics...Is that a floating rotor...?..looked like the top was pushing a little more than the bottom..Nicely sorted mate.
Great explanation! Helped me repair my '99 F250
Thanks for watching and commenting .
You spend all your time doing that dontcha? 😂
Haha "If you see any leaks, yell out and tell me."
He almost got me on that one lol!
I started laughing, ..just like dad saying "hold the light".
didn't see any leaks .. can you re-kit these Toyota calipers and save a few bucks ?
Great video, very well explained, too bad no one in the comments knows how drum brakes work, ah well they are relics now a days to the domestic industry
Thanks for the kind words . Thanks for watching and commenting.
Great Job ! Never Would Believe The Brake Line Would Swell
THANKS this Vid Helped Me Diagnose My Issuse Which indeed was
The Brake Line !!! After removing the Brake Hose I blew compressed air
Through the new and the old Brake Hoss and the differance was Dramatic!
Night and Day !!! Was so fustrated because the hanging caliper seemed like the bearings
Where bad , but they were not bad ....spent 60+ bucks to learn that lesson
Additionally Becareful when disconnecting the hard brake line from the body
Mined needed 12hrs and some heat applied before i felt confident enough that I would not
Break that hard line while disconnecting the flexible brake hose
GOOD LUCK all and THE LORD BLESS YOU
#JesusIsTheAnswer
Ps thats 12hrs for the penetrating fluid to work :)
Glad you got it figured out , thanks for watching and commenting
Very well done explaining everything so perfectly thanks for helping me out
Glad it helped!
Cool got the whole thing all in one video. Thank you
Glad it helped!
Had the hose /acting as a check valve issue before.Of course I thought it was the caliper like you said until hours of frustration and two calipers.Long before you tube could help me.
+newyota1 Thanks for watching and commenting
Thank you sir!!! This is probably the best informational video I've seen on here don't skip steps and you take the time to describe what you're doing..
One question what is gravity bleeding and how do I do it? Does car have to be running? I'm guessing with cylinder cap off not running
Gravity bleed i loosen master cylinder cap . then open bleeder and let fluid run . just do not let master cylinder run out of brake fluid. no need to start car.
Awesome information and saved me a lot of grief low and behold it was the the hose great video the clamp on the control arm had rusted up and restricting the flow all good.
Thank You
Thanks for watching and commenting , Glad it helped
That was beautiful…gave me lots to think about…Thanks!!
You are so welcome!
Excellent video & some great troubleshooting tips. Thanks.
Nice video. I have subscribed. The mechanic changed new master cylinder and bled but still have spongy brake sometimes, so I guess it is the caliper and maybe hose. Most of times I get spongy brake when making left U turn while slow driving. Any advice please?
Great diagnostic tips, thanks!
I have a 2005 Ford E150. I cannot find the problem of my front brakes dragging heavily. So far, I have replaced the master cylinder, calipers, and brake lines from the caliper to the connection on the body frame. I have not replaced the brake pads, as they are close to brand new. I also did not change the rotors, as they look pretty good. My ABS light does not go on, and the fuse is good. I have followed your utube and tried everything. Before the white coats come and get me, please help me if you can. Desperate Ron
If you have new calipers , we will assume it is good and the slides are free . thinking it has the slides in caliper . If slides are in caliper bracket then make sure they move in and out free. . You said brake pads look good . but do they slide freely . If they go into caliper bracket , make sure they slide around by hand . If attach to caliper then they will be fixed there and caliper would be the sliding part. . So make sure all the mechanical parts are in good working order . if so then see if holdin fluid pressure , by releasing bleeder . But a lot of tines dragging braks that one can still drive on is a slide stuck or pads stuck if they are the ones that float in caliper bracket .
Thank you so much, god bless you
You are so welcome!
Good video, I learned a lot, keep em coming, thx for the info
Thanks for stopping by and commenting
Thanks , this video helps a lot.
Great video!!! I have watched my share as I typically do but this video was thorough and clear . I feel confident I can do the job and not have doubts I will do the job correctly. Thank you
Glad it was helpful!
I had both front rubber brake lines collapse on my 95 dodge neon. I went through a brake rotor and 2 sets of pads before I figured it out because I'd never heard of the line doing that.
Thanks for watching and commenting.
Text my brakes marotta McCaleb and my brake lines on one side I replace one brake line two years ago for having the same problem when I run the car or truck for an hour that's the side that I just replace the line and it's grabbing its this is grabbing my brakes my brakes start smoking a Dodge Dakota 1999 pickup I need help finding the problem everything is been changed on the front
hellcat1988 you’re first problem was that you bought a dodge
You rock! I've been looking for this
Man, I hollered! I thought I saw something! Turned out to be a little gunk on my contact lens...
Excellent video, nonetheless.
+Matt Hansen LOL thanks for watching
I like your troubleshooting .
Thanks
Thanks-I just got a new banjo bolt to install.Hope that fixes it.If not last thing is hose.Really can't see anything wrong there though.Problem is very small.
Thanks for the video, help me understand the throttle sensor light.
Thanks for watching and commenting
How do you know the problem is in that hose and not somewhere upstream in the brake line?
By doing the same where the hard line connects to the rubber line
No leaks, I watched for ya!
Thank you for making this video but I follow all steps and was trying to stop at a red light after doing about 45 and the brakes went out and i smashed into a mini van. Any ideas?
Something may not of been done right , leaking or something , may get a mechanic to look and see what went wrong
Did you test your brakes first?
You contaminated your brake pads with brake fluid most likely
Thanks for the video...I just bought a 91 oldsmobile station wagon and the front brakes were not working at all..I put on a set of new caipers and pads..plenty of brakes now but the driver side was sticking and causing the car to pull to that side...also it would stop sticking sometimes but then it didn't work at all because when braking the right would pull and I had to turn the steering wheel to the left to keep the car on the road..I exchanged the driver side caliper for another because I thought it was defective but the newest one is doing the same..with the wheel off if I hit the brakes it gets tight and will not release until I open the bleed valve a little..then it spins free..the rubber line is new looking but I took it off and I could shoot air through it in both directions...my ABS light is not on but I wonder if it could be a problem?I might try and bypass it because that thing looks expensive!...I don't think the master cylinder is bad because the other front wheel is working good..could it be that I don't have the system bled good enough?...I am by myself and have to wait for my neighbor to pump the brakes for me..if you have a minute maybe you might think of something I didn't..thanks
You say it sticks until you loosen bleeder . . Next just to be sure do it again and loosen the metal line going in to the hose , on master cylinder side , if the caliper releases then hose is good , if not bad , if releases then keep going and loosening fittings till you find where it releases . it may act different with fluid pressure on it than with just air . I would not think air in system would stop caliper from releasing. A lot of times if top is off master cylinder and you loosen a bleeder it will gravity bleed on its own . that is how i do a lot of them .
I will try that in the morning..thanks
If it starts leaking you guys
tell me you just got yourself a new subscriber lol 🤣😂👍
Thanks for the sub!
great step by step visual video. I rely on these a lot. I do have a problem I can't find. 93 bronco. and BOTH front wheel hubs / lug nuts are so hot after driving short in town that you can't touch them. To fix I have replaced (on both sides) : pads, rotors, calipers, rubber brake hose from caliper and master cylinder. since the lug nuts are hot from smelly hot brakes on BOTH sids, I believe it has to be up at master cylinder. Could it be the metal brake lines ? Could it be the metal valve conection point at mastercylinder? I did not replace that nor did i replace the metal brake lines.
This is driving me nuts. I have put 700 miles on the new pads/rotors calipers... still getting too hot like brakes are dragging.. any ideas?
adding and truck brakes straight and good. everyting seems fine except too much heat up there.
Jack it up and see if brake is dragging , also is it hot from brakes or wheel bearing , if center is hotter than caliper or rotor then check bearings
What exactly did you do to “readjust the brake” after the test drive, because the pedal still felt low?
Bleed the brakes if it feels low. Air is in the system if the pedal sinks. You should feel pressure when you press the pedal down
if rear drum brakes adjust them
@@wtbm123 they were disk
great video very well explained and presented this helped me so much thankyou so much sir...
Can you gravity bleed without the tube?
yes
Great video!! Thanks for sharing with us!
How did you adjust the back brakes?
They were drum brakes
Did you pump the brakes to get the bubbles out our let it freely come out .
I am not a fan of pumping to bleed , if it will not gravity bleed i use a vacuum bleeder . can get those pretty cheap.
every tool has a hammer side ha nice video sir
Yes they do
right too the littlest detail , i thank you
Thank you for watching and commenting
SURE thing, im doing a mustang gt today that sat a long time ,very stuck ;pins two broke off in the hold down , welp back too the grind good info keep em commin.
Brilliant 👍
Thanks for watching and the kind word
Ive got a heat issue on both front rims and one rear. since its more than one wheel, could it be the ABS or just air in the line? I did take fuses out of ABS system but its still hot.
Prob not the abs unit . Only way to know for sure is to look and diagnose them . Could be calipers , caliper slides , pads not moving free , brake hose , Would need to see if something was not moving free , or if fluid pressure is not releasing , Could be abs unit , but many other things go wrong first
I bled the hole system and my pads are sticking to rotor, what would it be? The piston doesn't retract like 2 or 3 mm but when i push it, it retrack very easily. Whats the problem?
Are the caliper slides free , depending on the vehicle could the pads be stuck in the caliper bracket , If you push the brake pedal and release it will not move far , but just far enough for the rotor to turn fairly freely .
@@wtbm123 yes they are, I cleaned it and and put grease. The pad thickness could afect? They aren't original, im using Kashima.
I too noticed that the top of the caliper was moving more than the bottom... I wonder if the bottom caliper pin might have had some rust in it, or not enough lubrication, and was sticking a bit?
I noticed that too. I thought that looked odd. Also, it was recommended that brake grease be used to lub slides. That is not recommended because the boots on the slides are a rubber product and brake grease a petroleum product will dissolve rubber over time. Only high temperature silicone based grease is recommended for caliper slide bolts. Silicone will not dissolve rubber boots.
+Ken In Atlanta I guess i did not know they made non silicone brake grease . Not sure why it looked that way , watching vid i agree it looked like one was moving more than the other , but both were cleaned and lubed , but it does look odd .
+wtbm123 Thanks for the followup. I should have started by saying that I always wondered how a hose could act as a check valve. You did an outstanding job showing how that could occure. I live in the south and the under side of cars down here look almost brand new so I'm going to suspect slides and calipers first before brake hoses for sticking caliper diagnosis. Here are two silicone products that work with caliper slides. 3M 08946 Clear Silicone Paste and Super Lube 92003 Silicone Lubricating Grease with PTFE
+Ken In Atlanta Permatex 24125 Ceramic Extreme ,or , Permatex - Ultra Disc Brake Caliper LubePart # 24110 , are the two that i use
Silicone breaks down in cold Weather. I thought it was anti seize that was suppose to be used.
Great video, thank you!
Glad you liked it!
Great video some wealth of experience gained from here 🙂
Glad it was helpful!