Good review dude. My Firefly is a little wobbly at the torso joint but tight at all other joints. Nothing like my Snake Eyes, that one is so wobbly that he barely stands. I really like this version of Firefly, they nailed the colors and look of him.
Hey! Thank you for checking out my video! I think they did a fantastic job with the look of the figure. It's just too bad it has the quality issues. So far it standing well on my shelf so I'm happy about that. You're right about the first snake eyes figure. I hope we don't see these issues in the future. Cheers dude 🍻
I see a trend with review videos. The reviewer watched other people's videos before doing their own review. The video creator said he heard others complain about the ab looseness. This tells the audience that this video is not a blind, uninformed review. Once the figure was unpacked, "QC issue" was said so much that I felt I needed to take a drink every time I heard the phrase. In my opinion, a QC issue hinders the ability to pose the figure. For example, if I pose the figure to fire their weapon with an outstretched arm and the arm continually falls down to the figure's waist, that is a QC issue. I did not see any evidence of a QC issue in the video (or with my figure). My figure also had the loose abs but it didn't hinder the figure posing. The part that really got me was we couldn't stand the figure but the figure was standing on its own (on a rotating platform) at the end of the video.
Hi, I appreciate your comments. First of all, I'm in Canada so by the time I get my hands on a figure, it has already been out for a month in the USA. So yes I've seen and heard videos, comments and photos of this figure and and over and over I'm hearing this figure has a few issues. I do my videos for me because I enjoy creating and editing them. So when I got this figure I was obviously wondering how it was going to be. First time opening it right on camera and yes it has some issues. Is it the end of the world? Absolutely not. It's only a toy. This is the first figure I have reviewed that I wasn't happy with. Have you watched any of my other videos? Probably not. And in those other videos I praise how much I like the figures and never say a bad thing about them even if they have little imperfections. And yes after moving the figure around on camera I realized that the posing of the figure wasnt too bad. And it's now standing on my shelf and he's standing fine. So really in the end I'm allowed to express how I feel about the figure in my review, it's up to you if you want to watch it or not. Cheers
@@destrosdeskThe question becomes what is the video’s purpose and audience? Is this video supposed to be a review (to inform/persuade a watcher to buy or not buy)? Or is this video a form of artistic expression like a parody or rant? Unfortunately the video comes off as neither. In my opinion, the video says “Others said this figure sucks and I want to jump on the bandwagon”. I know I am being overly critical but I do see potential in your material
@Paingame3 Thank goodness for your review of his review video. Youre changing the world! I'm sure his videos will be so much better now that you've got that off your chest
Hey! Thank you so much for checking out my video! It really is a great looking figure. Its just too bad it has a few issues. I'm hoping you got a good one! Thank you for the Sub, very much appreciated!
Thanks for the shout out, Rob! Great review, thorough as always. Sucks that yours is loosey-goosey, I haven't actually heard of any that weren't and haven't received mine yet so kinda expecting the same issue.
Hey brother, thank you for checking out the video! Yup I was lucky enough to get a loose one. I hope you get a good one! Apparently there is a number code on the back of the box. Two different codes. One code has the crap figure in the box and the other code are good ones. Good luck brother!
oh yeah I read somewhere it has to do with what factory it was made in. Chances are all the NA distribution through the usual dealers will be the same.@@destrosdesk
I'm not sure where, I thought I tried all the spaces but it doesn't hold it. On his left forearm, you can wedge it in the "cuff" and it holds pretty well.
You can fix the looseness by putting watery elmers glue on it. Let it fall in the seams and move it up and down. Leave him alone for 24 hrs and then move him. Instant fix. The waist is unfixable though.
I bought 2. 1st one came from BBTS. It came with his head off. Legs twisted and back arched all to hell. His ab crunch is loose. But once posed and on my shelf, it isn't an issue. He still looks awesome. I haven't opened the one from Pulse yet.
Hey! Thank you for checking out my video! Sorry to hear you also have these issues too. Man that sounds rough the way it was packaged too. I got mine from pulse so your other one might not be good but I'll keep my fingers crossed for you! I tried taking the head goggles 🥽 off his head and his head fell off with no effort.
Hey dude, thank you for checking out the video! Ya I got a bad figure but hopefully doesn't happen again. I love your channel man! I've learned a lot from your videos. Hearing about character back stories is what I need. Cheers man! 🍻
Hey man! Thank you for checking out the video! That sucks you are dealing with the same issues with Firefly. I hope these unfortunate quality issues get resolved at Hasbro. Cheers dude 🍻
Hey! Thank you for checking out my video! I'm thinking I'm going to ordering one from Amazon in November. This wave of figures get released on Amazon in Canada on November 1st. So hopefully those ones are good. Cheers 🍻
I don't have the issue at the knee or the torso. Love this figure. I've heard there's a production issue, but I have two that are fine. One has a little torso looseness but it's not wobbly. I do have a bit of that gap, but by pushing the diaper up a bit it seems to have helped. No issues posing or standing, even on one leg. A second one might be better.
Hey! Thank you for checking out my video! I wish I had your luck! It is a great figure and I love the look of it. I've got mine posed on my shelf and seems to be ok. Down the road I might get another one and see if it's better but I'm not going to worry about it too much. I just hope Hasbro takes this seriously and they can fix the issues causing this. Cheers 🍻
@@destrosdesk Definitely agree, and keep up the good work. I know they've been having some factory issues over the last couple of years. Looks like they fix one and another crops up. This has to do with moving production away from their long-time, high end partners in China to less experienced but more geopolitically stable operations in Vietnam.
Hey! Thank you for checking out my video! That's good you at least got stiffer knee joints. Sorry to hear you are experiencing some issues with Firefly. Hoping Hasbro has a fix for this or I might just buy another in a couple months and hopefully get a good one. Cheers 🍻
Yeah, my firefly has it as well. The torso spacing. So I have to shove his belt way up in his torso to cover it. Kind of sucks Thank for doing the video!
Hey! Thank you for checking out the video! That's sucks dude. Its very unfortunate that these poor quality Firefly figures were allowed to be released. Hopefully this doesn't happen with future figures. Cheers 🍻
Yes I agree the figure looks amazing but oh that ab crunch.... very unfortunate. And a messed up gun... brutal. I'm thinking I might order a weapons pack from Gridiron or action force to replace the crap weapons we've been getting lately.
@@destrosdesk same thought, i used one from AF weapon set (forgot the name), a green/olive drab psa ar9. The colour relatively matches FF's green pouches. The gun fits FF aesthetic seamlessly, you can mod the suppressor onto the barrel to resemble the og even more.
Good review. I have one question regarding "looseness" as I don't have Firefly in hand yet. I see a lot of people complaining about it being loose. But it does not look loose on camera. I'm fearfull that we American Figure collectors have become so accustomed to Hasbro and others incredibly stiff/need to be heated joints that we've forgotten how they are actually supposed to move. if you put the limb, hips or abs in a specific position does it hold it well if you lightly shake the figure? Or does it go all rag doll? Rag doll is bad. Joints moving smoothly with little effort os actually good. Try posing a Figma or Sen-ti-Nel and you'll get what I mean. Can the figure support its own weight? Figures being slightly looser than what we've been getting the last few years is actually good. Floppy Rag Doll is bad.
Hey Man, thank you for checking out the video! I get what you are saying. I would say the way you described it, it's not a rag doll. I was able to pose it and add it to my Joe shelf. So if yours is the same looseness as mine then you won't mind it. I think if it was played with over time it would become a rag doll. All the figures I've gotten so far have been tight but this one is a little off. It's nothing to lose sleep over. Let me know how your Firefly is when you get it! Cheers man! 🍻
Mine was the exact same way and it also had a gap at the left bicep swivel. Sent back for a refund. I’ll wait a month or so and will reorder in the hopes I get a better one.
Hey! Thank you for checking out my video! I'm not going to send mine back but ya down the road a bit I might pick up another one and hope for the best! Cheers 🍻
Hey! Thank you for checking out my video! Oh you lucky guys that got good figures lol. I'm glad you got a good one. I'm probably going to order another one in November and see what happens. Cheers 🍻
Can you believe I have the first version of Firefly in the Classified series but I haven't unboxed it yet! The first figure is great but 2.0 is awesome. If it didn't have the issues it has I think it would have been a perfect figure! Cheers 🍻
Good review. Sometimes you get some bad batches, probably depending on how it was made. I did a review on him on my channel. I am not a big fan of most of the backpacks in the Classified line, especially the Tunnel Rat backpack is oversized and the vintage one was too big and top heavy . I don’t think I had an issue with Firefly’s backpack though in my video review of him on my channel.
Hey! Thank you for checking out the video! Ya in my video I said the back pack was just holding on but really I think the back pack stays on well. It looked like they put a bit of a curve in the back pack to align with his back. So that helps a lot. It's just a bit heavy to pose the figure but I've got him posed up on my shelf and so far so good. Really nice figure to look at. Cheers dude 🍻
Yep, somehow, it seems like they use an incredibly inconsistent algorithm in the same plastic format for the backpack in the plastic injection molding process in my opinion. I am not sure why, but since Hasbro, I think, refuses to move out of China, there will always be inconsistent results of their machines that are injection molding machines due to the quality control issues, in my opinion.
Hey! Thank you for checking out the video! Do you know if there is a fix for that waist gap? I'm going to take a closer look at mine and see if there is anything that can be done. Thank you for your comments! Cheers 🍻
@@destrosdesk It was a solid review! I always like watching the new stuff. I don't have a good solution yet. I'm not a big customizer, so I'm trying to remember folks who are to ask them. I am hesitant to do a straight boil because of the softer plastic on his bandoliers and crop holster rig. Once I get those off, I'm thinking a boil and separation to at least be able to see what's going on.
Hey! Thank you for checking out my video! I'm hoping there is a fix for this but if not I might pick up another one in a month or two and see if I can get lucky with a new one. If I hear of a fix I will let you know! Cheers 🍻
This is the first post I've made here. Nice review, and I agree with your assessments of this figure! I have two of these figures, and one of them is better than the other when it comes to the loose waist issue. That said, I think that even though one is better, the waist still has a loose feel to me. Clearly, there are QC issues with this figure. I'm betting that the ball joint that holds the torso onto the pelvis is too small, or the hole that it fits in was carved a little too big. The worst of my two figures is REALLY bad. I can see the gap, and I fear that the figure is going to snap into eventually. Hasbro has used some very cheap plastic on this figure. That's pretty obvious. Too bad, because the sculpt and details are pretty nice. Not sure why all the Fireflys got the glossy eyebrows either! Both of my figures have glosses eyes--which is great--but also have the shiny eyebrows--which makes no sense at all. I may try to use soak my Firefly with the weakest waist in some boiling water to see if I can pop him apart. Then I might be able to figure out what's going on with the looseness of the waist. Perhaps it can be fixed by adding some apoxie sculpt to the ball joint or something as simple as that? I'll have to risk one of them to find out what the issue truly is, but it's clearly a real problem.
Hey man! Thank you for checking out my video! And thank you for your comments! Ya its just too bad we are dealing with these issues on a figure that looks so good. After recording the video I went to take the head piece/goggles off and his head popped off with no effort. All I could do was laugh at that point. Let me know if you find a solution to the issues. Cheers dude 🍻
I honestly think they decided to move to a different plastic with this figure. Prbly something more cheaper, its definitely alot more "gummier". My Vypra was the same way.
Hey! Thank you for checking out my video! I hope they aren't changing plastic. They need to improve the quality of plastic for weapons too. People are 3D printing better weapons at home! Thank you for your comments. Cheers 🍻
I just ordered an Action Force weapons pack for the Joe's. Keep your eyes open for a weapons set that will work specifically with Firefly. Like they have a desert commando set that will work with desert commando snake eyes. So they may come out with one for Firefly. That way you'll get a new kick ass backpack guaranteed to have a peg on the back pack. If I see something I'll let you know. Cheers dude 🍻
I am not so sure your "loose" issue was bad luck. I believe it is systemic across the board. Mine was and every review I have seen has the same problem. It's hard to say whether it is an actual QC issue or an engineering/design problem.
No you're right it's not just my bad luck but I have heard there are Fireflys out there that apparently don't have any issues. Since the figure looks as great as it does I may get another in a month or so and see if I can get a better one. But for now he's posed on my shelf and is looking good! Cheers dude 🍻
My whole figure is like a marionette. If you look at the box art, there is even a huge gap in his waist there. I'm 100% disappointed in this figure i got from Hasbro Pulse. I bought a snow job due to FOMO and I almost canceled it, but when I say that figure is the EXACT OPPOSITE of this figure. They both came the exact same day. Opened firefly first and then I properly put him back in his box. Took out Snow job and left his on display for a couple of days until the next figures came. Does the floor wax hack we used for transformers work or is it a no go because those are hard plastic?
Hey! Thank you for checking out the video! I'm sorry to hear that you are having the same issues with Firefly. Mine also came from Hasbro Pulse. I heard it was made at a different factory which is causing the problem. Apparently there are Firefly figures that are perfectly fine. I may wait a while and down the road get another one and hope for the best. I have not heard of any solutions to fix the issues with this figure. Ya all the figures I have everything has been fine. I hope Hasbro takes this seriously and it doesn't happen again. Cheers 🍻
Hey Walter! Thank you for checking out my video! Yes unfortunately the weapons Hasbro equips with these figures are disappointing. They are all way to flexible. My suggestion (unfortunately another cost) is to check out the Valaverse weapons packs and/or Gridiron Studios for their weapons kits. The stuff Gridiron is putting out for Classified figures is incredible. I really hope Hasbro makes better quality weapons in the near future.
@@destrosdesk I have purchased form them, Gridiron and Aresenal Of Pew Pews on eBay. They all have great selections. I had a futuristic rifle from one of the Snake Eyes that I have him using. It looks fine.
Oh that's awesome you have ordered from those guys. I have a Valaverse pack but I'm looking to order some stuff from Gridiron. And the upgrades for the Vamp that Gridiron is doing is incredible!
I got 4 of these, all are trash. Bad ab crunch, weird hip gapping, waist gap and what’s with the shape of these butterfly joints… the hard corners stick out like broken bones. I was kinda afraid to play around with this figure to much so I didn’t take notice of the elbow joints, I hope they’re not like the Crimson Vipers and extremely soft. The head sculpt is bland looking imo, the V1 Firefly has a much better face. Will it stand on a shelf and look good at a distance? Sure, will it last long under actual play, doubtful. I don’t know who is buying these for their 4 year old, but that’s the age range for them 🤨
Hey! Yes that describes exactly what my is like. I can see them maybe have issues with the first wave or two but not this far down the line. I'm trying to collect all the figures but now I may not be in a rush to get them. I really hope this doesn't continue or it'll be bad news for this toy line. Cheers dude thanks for your comments 🍻
Good review dude. My Firefly is a little wobbly at the torso joint but tight at all other joints. Nothing like my Snake Eyes, that one is so wobbly that he barely stands. I really like this version of Firefly, they nailed the colors and look of him.
Hey! Thank you for checking out my video!
I think they did a fantastic job with the look of the figure. It's just too bad it has the quality issues. So far it standing well on my shelf so I'm happy about that. You're right about the first snake eyes figure. I hope we don't see these issues in the future. Cheers dude 🍻
I see a trend with review videos. The reviewer watched other people's videos before doing their own review. The video creator said he heard others complain about the ab looseness. This tells the audience that this video is not a blind, uninformed review. Once the figure was unpacked, "QC issue" was said so much that I felt I needed to take a drink every time I heard the phrase. In my opinion, a QC issue hinders the ability to pose the figure. For example, if I pose the figure to fire their weapon with an outstretched arm and the arm continually falls down to the figure's waist, that is a QC issue. I did not see any evidence of a QC issue in the video (or with my figure). My figure also had the loose abs but it didn't hinder the figure posing. The part that really got me was we couldn't stand the figure but the figure was standing on its own (on a rotating platform) at the end of the video.
Hi, I appreciate your comments.
First of all, I'm in Canada so by the time I get my hands on a figure, it has already been out for a month in the USA. So yes I've seen and heard videos, comments and photos of this figure and and over and over I'm hearing this figure has a few issues.
I do my videos for me because I enjoy creating and editing them. So when I got this figure I was obviously wondering how it was going to be. First time opening it right on camera and yes it has some issues. Is it the end of the world? Absolutely not. It's only a toy. This is the first figure I have reviewed that I wasn't happy with. Have you watched any of my other videos? Probably not. And in those other videos I praise how much I like the figures and never say a bad thing about them even if they have little imperfections. And yes after moving the figure around on camera I realized that the posing of the figure wasnt too bad. And it's now standing on my shelf and he's standing fine. So really in the end I'm allowed to express how I feel about the figure in my review, it's up to you if you want to watch it or not.
Cheers
@@destrosdeskThe question becomes what is the video’s purpose and audience? Is this video supposed to be a review (to inform/persuade a watcher to buy or not buy)? Or is this video a form of artistic expression like a parody or rant? Unfortunately the video comes off as neither. In my opinion, the video says “Others said this figure sucks and I want to jump on the bandwagon”. I know I am being overly critical but I do see potential in your material
None of that changes the fact that the figures ARE loose.
@@davegoodwin1848the abs are a bit loose but not out of line for a mass produced product.
@Paingame3 Thank goodness for your review of his review video. Youre changing the world! I'm sure his videos will be so much better now that you've got that off your chest
Mine was also loose. Sucks cause he is by far the best of 2023 for me.
I totally agree dude!
Thank you for checking out the video!
Very much appreciated!
New sub. This figure takes me back. He looks great. Can't wait to unbox him. Great vid..
Hey! Thank you so much for checking out my video! It really is a great looking figure. Its just too bad it has a few issues. I'm hoping you got a good one! Thank you for the Sub, very much appreciated!
Thanks for the shout out, Rob! Great review, thorough as always. Sucks that yours is loosey-goosey, I haven't actually heard of any that weren't and haven't received mine yet so kinda expecting the same issue.
Hey brother, thank you for checking out the video! Yup I was lucky enough to get a loose one. I hope you get a good one! Apparently there is a number code on the back of the box. Two different codes. One code has the crap figure in the box and the other code are good ones. Good luck brother!
oh yeah I read somewhere it has to do with what factory it was made in. Chances are all the NA distribution through the usual dealers will be the same.@@destrosdesk
@@brandonr8269 My figures are Cross 🤞 for you my friend!
There's a space to wedge the remote in on the backpack. It looks great and holds it really well.
Oh really! I totally missed that. Thank you for the tip! Much appreciated 👍
Where is that? Just so I know if and when I finally get mine
I'm not sure where, I thought I tried all the spaces but it doesn't hold it. On his left forearm, you can wedge it in the "cuff" and it holds pretty well.
You can fix the looseness by putting watery elmers glue on it. Let it fall in the seams and move it up and down. Leave him alone for 24 hrs and then move him. Instant fix. The waist is unfixable though.
Awesome! Thank you for sharing this! I just might give it a try 👍
I bought 2. 1st one came from BBTS. It came with his head off. Legs twisted and back arched all to hell. His ab crunch is loose. But once posed and on my shelf, it isn't an issue. He still looks awesome. I haven't opened the one from Pulse yet.
Hey! Thank you for checking out my video! Sorry to hear you also have these issues too. Man that sounds rough the way it was packaged too. I got mine from pulse so your other one might not be good but I'll keep my fingers crossed for you! I tried taking the head goggles 🥽 off his head and his head fell off with no effort.
Nice review and congrats on passing 300! Sorry to see yours has QC issues
Hey dude, thank you for checking out the video! Ya I got a bad figure but hopefully doesn't happen again. I love your channel man! I've learned a lot from your videos. Hearing about character back stories is what I need. Cheers man! 🍻
Awesome video man! I have the same issues with this figure! 👍🏿
Hey man! Thank you for checking out the video! That sucks you are dealing with the same issues with Firefly. I hope these unfortunate quality issues get resolved at Hasbro. Cheers dude 🍻
This Fig looks great saw him today!
Ya man the figure looks great, it's just too bad it's loose. But I've had good luck with figures so one poor one isn't that bad I guess.
I received mine from Amazon last week- same issues. Scheduled a return/exchange. Received the new one: it's not perfect, but a lot better.
I'm glad they sent you a new one that seems to be better! I'm looking into getting another one.
The artwork looks fantastic!
I agree, they did a great job with the artwork on this one!
Ordered through Amazon. Joints came super stiff. Had to use hot water to break in joints.
Hey! Thank you for checking out my video! I'm thinking I'm going to ordering one from Amazon in November. This wave of figures get released on Amazon in Canada on November 1st. So hopefully those ones are good. Cheers 🍻
Fortunately, I dodged the QC bug, which you may see next week.
That's awesome! I'm glad you got a good one!!
Found him at gamestop the other day. For the price really cool figure.
I agree! Hopefully your figure didn't have too many issues with quality.
I don't have the issue at the knee or the torso. Love this figure. I've heard there's a production issue, but I have two that are fine. One has a little torso looseness but it's not wobbly. I do have a bit of that gap, but by pushing the diaper up a bit it seems to have helped. No issues posing or standing, even on one leg. A second one might be better.
Hey! Thank you for checking out my video! I wish I had your luck! It is a great figure and I love the look of it. I've got mine posed on my shelf and seems to be ok. Down the road I might get another one and see if it's better but I'm not going to worry about it too much. I just hope Hasbro takes this seriously and they can fix the issues causing this. Cheers 🍻
@@destrosdesk Definitely agree, and keep up the good work. I know they've been having some factory issues over the last couple of years. Looks like they fix one and another crops up. This has to do with moving production away from their long-time, high end partners in China to less experienced but more geopolitically stable operations in Vietnam.
Mine is really floppy as well but the legs are fine actually i had to run them under hot water to loosen them up great video
Hey! Thank you for checking out my video! That's good you at least got stiffer knee joints. Sorry to hear you are experiencing some issues with Firefly. Hoping Hasbro has a fix for this or I might just buy another in a couple months and hopefully get a good one. Cheers 🍻
Yeah, my firefly has it as well. The torso
spacing. So I have to shove his belt way up in his torso to cover it. Kind of sucks Thank for doing the video!
Hey! Thank you for checking out the video!
That's sucks dude. Its very unfortunate that these poor quality Firefly figures were allowed to be released. Hopefully this doesn't happen with future figures.
Cheers 🍻
Yeah, considering the fact I’m collecting all of them but he is still workable and he is still super cool figure.
I agree 💯
FF looks amazing. Sadly, mine 's ab crunch is a floppy mess, gun got messed up beyond warm water fix.
Yes I agree the figure looks amazing but oh that ab crunch.... very unfortunate. And a messed up gun... brutal. I'm thinking I might order a weapons pack from Gridiron or action force to replace the crap weapons we've been getting lately.
@@destrosdesk same thought, i used one from AF weapon set (forgot the name), a green/olive drab psa ar9. The colour relatively matches FF's green pouches. The gun fits FF aesthetic seamlessly, you can mod the suppressor onto the barrel to resemble the og even more.
Awesome! I'm going to look into this today!
I ordered a AF weapons set! Got it Friday. Going to start changing weapons out today!
Good review. I have one question regarding "looseness" as I don't have Firefly in hand yet. I see a lot of people complaining about it being loose. But it does not look loose on camera. I'm fearfull that we American Figure collectors have become so accustomed to Hasbro and others incredibly stiff/need to be heated joints that we've forgotten how they are actually supposed to move. if you put the limb, hips or abs in a specific position does it hold it well if you lightly shake the figure? Or does it go all rag doll? Rag doll is bad. Joints moving smoothly with little effort os actually good. Try posing a Figma or Sen-ti-Nel and you'll get what I mean. Can the figure support its own weight? Figures being slightly looser than what we've been getting the last few years is actually good. Floppy Rag Doll is bad.
Hey Man, thank you for checking out the video! I get what you are saying. I would say the way you described it, it's not a rag doll. I was able to pose it and add it to my Joe shelf. So if yours is the same looseness as mine then you won't mind it. I think if it was played with over time it would become a rag doll. All the figures I've gotten so far have been tight but this one is a little off. It's nothing to lose sleep over. Let me know how your Firefly is when you get it! Cheers man! 🍻
I think everyone is facing the QC issues😊
Mine was the exact same way and it also had a gap at the left bicep swivel. Sent back for a refund. I’ll wait a month or so and will reorder in the hopes I get a better one.
Hey! Thank you for checking out my video! I'm not going to send mine back but ya down the road a bit I might pick up another one and hope for the best! Cheers 🍻
im almost positive that every firefly will have the same waist gap having said that i have no loose joints
Apparently some of these don't have any issues. I'm going to wait a bit and then try and get another one. Hopefully it'll be better.
Out of 3 I got one ok one. Still a bit loose but not as bad as my first
Well that is good news that you got a decent one! Where did you order from?
Great review!! Except for the waist, mine was good to go.
Hey! Thank you for checking out my video! Oh you lucky guys that got good figures lol. I'm glad you got a good one. I'm probably going to order another one in November and see what happens. Cheers 🍻
I still have the one from the first waves.
Can you believe I have the first version of Firefly in the Classified series but I haven't unboxed it yet! The first figure is great but 2.0 is awesome. If it didn't have the issues it has I think it would have been a perfect figure! Cheers 🍻
Good review. Sometimes you get some bad batches, probably depending on how it was made. I did a review on him on my channel. I am not a big fan of most of the backpacks in the Classified line, especially the Tunnel Rat backpack is oversized and the vintage one was too big and top heavy . I don’t think I had an issue with Firefly’s backpack though in my video review of him on my channel.
Hey! Thank you for checking out the video! Ya in my video I said the back pack was just holding on but really I think the back pack stays on well. It looked like they put a bit of a curve in the back pack to align with his back. So that helps a lot. It's just a bit heavy to pose the figure but I've got him posed up on my shelf and so far so good. Really nice figure to look at. Cheers dude 🍻
Yep, somehow, it seems like they use an incredibly inconsistent algorithm in the same plastic format for the backpack in the plastic injection molding process in my opinion. I am not sure why, but since Hasbro, I think, refuses to move out of China, there will always be inconsistent results of their machines that are injection molding machines due to the quality control issues, in my opinion.
I subbed to your channel!
@@destrosdesk Thanks. I subbed to your channel as well.
The torso and waist aren't connected all the way. If you move the belt lower, you'll see the torso sits higher that should.
Hey! Thank you for checking out the video!
Do you know if there is a fix for that waist gap? I'm going to take a closer look at mine and see if there is anything that can be done.
Thank you for your comments! Cheers 🍻
@@destrosdesk It was a solid review! I always like watching the new stuff.
I don't have a good solution yet. I'm not a big customizer, so I'm trying to remember folks who are to ask them. I am hesitant to do a straight boil because of the softer plastic on his bandoliers and crop holster rig. Once I get those off, I'm thinking a boil and separation to at least be able to see what's going on.
Let me know if you have a fix
Mine was floppy too. I'm hoping someone comes up with a way to fix or manage that flop.
Hey! Thank you for checking out my video! I'm hoping there is a fix for this but if not I might pick up another one in a month or two and see if I can get lucky with a new one. If I hear of a fix I will let you know! Cheers 🍻
This is the first post I've made here. Nice review, and I agree with your assessments of this figure!
I have two of these figures, and one of them is better than the other when it comes to the loose waist issue. That said, I think that even though one is better, the waist still has a loose feel to me. Clearly, there are QC issues with this figure. I'm betting that the ball joint that holds the torso onto the pelvis is too small, or the hole that it fits in was carved a little too big. The worst of my two figures is REALLY bad. I can see the gap, and I fear that the figure is going to snap into eventually. Hasbro has used some very cheap plastic on this figure. That's pretty obvious. Too bad, because the sculpt and details are pretty nice.
Not sure why all the Fireflys got the glossy eyebrows either! Both of my figures have glosses eyes--which is great--but also have the shiny eyebrows--which makes no sense at all.
I may try to use soak my Firefly with the weakest waist in some boiling water to see if I can pop him apart. Then I might be able to figure out what's going on with the looseness of the waist. Perhaps it can be fixed by adding some apoxie sculpt to the ball joint or something as simple as that? I'll have to risk one of them to find out what the issue truly is, but it's clearly a real problem.
Hey man! Thank you for checking out my video! And thank you for your comments!
Ya its just too bad we are dealing with these issues on a figure that looks so good. After recording the video I went to take the head piece/goggles off and his head popped off with no effort. All I could do was laugh at that point. Let me know if you find a solution to the issues. Cheers dude 🍻
I honestly think they decided to move to a different plastic with this figure. Prbly something more cheaper, its definitely alot more "gummier". My Vypra was the same way.
Hey! Thank you for checking out my video! I hope they aren't changing plastic. They need to improve the quality of plastic for weapons too. People are 3D printing better weapons at home! Thank you for your comments. Cheers 🍻
To me he is just like the 1st version Snake Eyes. ALL my 1st version Snake Eyes have the same ab crunch and same issue. Very squirrely loose.
thinkin im throwin the old o ring back into the waist between the torso and waist see if it tightens it up a bit lol
Let me know if you get something to work!
@@destrosdesk I definitely will
i always thought that was hair on zartan's head. 🤣
Yeah a lot of people think it's hair but it's a hood. Easily mistaken! 😁
I love the looseness easy to play around with. However my backpack has no peg!!
The backpack didn't come with a peg...oh man that is brutal. Are you going to send it back?
@@destrosdesk im not sure what I can do about it, never sent anything back. I got from gamestop, but not their fault.
@@destrosdesk i can live with it, maybe pose him carrying the backpack.
I just ordered an Action Force weapons pack for the Joe's. Keep your eyes open for a weapons set that will work specifically with Firefly. Like they have a desert commando set that will work with desert commando snake eyes. So they may come out with one for Firefly. That way you'll get a new kick ass backpack guaranteed to have a peg on the back pack. If I see something I'll let you know. Cheers dude 🍻
@@destrosdesk thanks for the heads up!
Yeah mines came gummie too but dope fig
Ya man it is a great figure! Has a few issues but looks awesome!
Same issue but mine got a right arm that pops off easily
That sucks dude. I discovered that mines head pops off taking the goggles off! At least it looks good to look at!
I am not so sure your "loose" issue was bad luck. I believe it is systemic across the board. Mine was and every review I have seen has the same problem. It's hard to say whether it is an actual QC issue or an engineering/design problem.
No you're right it's not just my bad luck but I have heard there are Fireflys out there that apparently don't have any issues. Since the figure looks as great as it does I may get another in a month or so and see if I can get a better one. But for now he's posed on my shelf and is looking good! Cheers dude 🍻
I got lucky enough to get one that's has zero issues so it's not all of them.
@@gregarcher8177 that's awesome dude! I'm glad you got a good one! At least that shows there are good ones out there.
My whole figure is like a marionette. If you look at the box art, there is even a huge gap in his waist there. I'm 100% disappointed in this figure i got from Hasbro Pulse. I bought a snow job due to FOMO and I almost canceled it, but when I say that figure is the EXACT OPPOSITE of this figure. They both came the exact same day. Opened firefly first and then I properly put him back in his box. Took out Snow job and left his on display for a couple of days until the next figures came.
Does the floor wax hack we used for transformers work or is it a no go because those are hard plastic?
Hey! Thank you for checking out the video! I'm sorry to hear that you are having the same issues with Firefly. Mine also came from Hasbro Pulse. I heard it was made at a different factory which is causing the problem. Apparently there are Firefly figures that are perfectly fine. I may wait a while and down the road get another one and hope for the best. I have not heard of any solutions to fix the issues with this figure. Ya all the figures I have everything has been fine.
I hope Hasbro takes this seriously and it doesn't happen again. Cheers 🍻
Only the torso on mine is loose..
Hey! Well that is good news! You shouldn't have any trouble displaying in a pose. Thank you for checking out the video! Cheers 🍻
I found that his rifle is too pliable and bends too much when you try to pose him with him holding it with both hands, The stock is way to flexible.
Hey Walter! Thank you for checking out my video! Yes unfortunately the weapons Hasbro equips with these figures are disappointing. They are all way to flexible. My suggestion (unfortunately another cost) is to check out the Valaverse weapons packs and/or Gridiron Studios for their weapons kits. The stuff Gridiron is putting out for Classified figures is incredible. I really hope Hasbro makes better quality weapons in the near future.
@@destrosdesk I have purchased form them, Gridiron and Aresenal Of Pew Pews on eBay. They all have great selections. I had a futuristic rifle from one of the Snake Eyes that I have him using. It looks fine.
Oh that's awesome you have ordered from those guys. I have a Valaverse pack but I'm looking to order some stuff from Gridiron. And the upgrades for the Vamp that Gridiron is doing is incredible!
@@destrosdesk I saw the Gridiron upgrades to the VAMP, but I think I will keep it stock for now, but who knows, that may change after a few videos.
I feel the same. Stock right now but that may change!
its super7 casey jones all over again you cant place a rounded off torso on a flat surfaced waist section
Oh did the super7 CJ have issues with the waist? I didn't know that.
@@destrosdesk yea same exact issue, looking like a dodgeball on a dinner plate lol
Lol!
I got 4 of these, all are trash. Bad ab crunch, weird hip gapping, waist gap and what’s with the shape of these butterfly joints… the hard corners stick out like broken bones. I was kinda afraid to play around with this figure to much so I didn’t take notice of the elbow joints, I hope they’re not like the Crimson Vipers and extremely soft. The head sculpt is bland looking imo, the V1 Firefly has a much better face. Will it stand on a shelf and look good at a distance? Sure, will it last long under actual play, doubtful. I don’t know who is buying these for their 4 year old, but that’s the age range for them 🤨
Hey! Yes that describes exactly what my is like. I can see them maybe have issues with the first wave or two but not this far down the line. I'm trying to collect all the figures but now I may not be in a rush to get them. I really hope this doesn't continue or it'll be bad news for this toy line. Cheers dude thanks for your comments 🍻
Meticulously meticulous
I had success
Oh nice, what did you do?
Quality is gonna be crappy get over it
I'm over it! 😁