A Broken Crankshaft of The Generator Engine That The Mechanic Attached to The Challenge//Must watch
ฝัง
- เผยแพร่เมื่อ 11 ม.ค. 2024
- A Broken Crankshaft of The Generator Engine That The Mechanic Attached to The Challenge//Must watch
#broken#crankshaft#generator#engine#that#mechanic#attached#challenge#pkdiscoveringtechnology - ยานยนต์และพาหนะ
Я- дурак, индикатором угол выставляю, да пробкой на краску конус проверяю, а тут херак и готово!
Ты еще не видел, как они блоки ДВС гильзуют. Вопрос, на сколько он далеко уехал, после установки калена на мотоцикл. Там приваривали сталь к чугуну, а это шикарное решение, что бы оказаться на берегу Ганга!
Хороший коленвал получился. Привязать на шею, и в Ганг!
16:05 готово - можно нести на мусорку 🤣🤣🤣🤣🤣
6:43 купил новый станок - быстрее вари в нём сваркой, делай из него наковальню, что бы испортить шпиндельные подшипники🤣🤣🤣🤣🤣
You'll get a better job and your lathe tools will last longer if you use cutting oil !
We don't need repair, we only buy new one., but this video is amazing
17:06 наш девиз - делай всё максимально криво🤣🤣🤣🤣
The keyway cut for the wrong key type was a joke.
резцы точить надо, и желательно не раз в пятилетку
глядишь и стружка гореть не будет и не поломает ничего
Тебя только это смущает в подобных роликах?
@@user-mi2yv4fb2b а есть что то ещё ?
Да , колхоз - колхозище . Сверлом шпоночный паз , а конус это вообще высший пилотаж , я тоже так смогу ))) хоть и не токарь , но именно так смогу однозначно
Он даже шейку шатуна перегрел🤣🤣🤣🤣🤣🤣
have these people ever heard about using coolant when machining? i wouldnt be bragging and posting a video. every one of these videos like this just exposes these quack fakes ignorance.
This guy is total hell with that laser!
U people are real engeenering
I like the part were he's hamming outer part of the race bearing. This such bs would never work .
Look at the oil seals on this bearing 1 is totalled before he even starts to hammer and since when has an IC engine used double sealed bearings on its crankshaft?
I like how he is cutting the key hole with a drill bit 😂 bit dodgy
And how balanced is it?
I was wondering the same thing, maybe that bearing is only used in the shop to confirm the fitment to the crank.
This guy is a hack. Taper is not even close.
Как думаете, его гордость берет за проделанную рукожопную работу?🤣
Muito legal bom demais meu amigo acabei de me inscrever no seu vídeo canal
Good
15:00 отрезной резец 🤣🤣🤣🤣🤣🤣
Brutal job. Amateur.
Why did it break on the flywheel side? Keyway not timed with magneto location plus very loose fitting key
th-cam.com/video/mJYAavPUdAc/w-d-xo.htmlsi=Xxjr7mrRsaN8n5IZ
rough work that's no way to cut a slot for a woodruff key
Автор заточить резец не может - жесть
That's really cool bro... Anyway, the spelling is neat
13:42 🤣🤣🤣🤣шлифовка шеек коленвала - неужели и правда руки из задницы - заточить резец?
Super,svaka cast,visokokvalifikovan majstor svog zanata...
8:36 интересно отрезать будет то же резьовым резцом? 🤣🤣🤣🤣🤣
Pandai dan kreatif 👍👍👍
Варить кардан "Это опасно, но су..а смело"*
это коленвал
Кардан от коленвала отличить не может, вот умора😂
Это коленвал, но видел как кардан укорачивали и варили на Roadkill, ЧСХ он у них естественно лопнул и сломал коробку. Но Roadkill в сравнении с пакистанцами это верх технологий.
3:00 на центровку то же нет денег 🤣🤣🤣
Sau xỉn tham gia giao thông hại mình, hại người phải dẹp tận gốc
Интересно, сколько секунд проживёт сальник на таком валу?
На клей лучше!
Hi❤❤
Saludos otro suscriptor
Аз не бих тръгнал никаке с този вал!
Super jest to odrestaurowane pozdrawiam serdecznie. 👍👍👍👍
nice welding.
Vai ter que tirar o escorpião do bolsso aí e caro da trabalho pra se fazer vai esvaziar a guaca mesmo sem pestanejar very good
Parabéns!
17:36 ровно, Н ,,надежность"
Make do and mend ! or needs must !
В ускоренном режиме прикольно, как миньоны разговаривают🤣🤣🤣
nice new lathe.
I like the chip catcher to protect the slides.
Why it broke at all and shouldn't be that forged after welding?
It seems like it broke because the casting/forging process was bad in the first place
@@Elyjah1 possible.
I love how all the parts were moving around and not properly secured. Lmao. I think that shaft is out of balance to...
Хитрый индус! Не на баджаже своём катается, а на Хонде! Видимо что-то знает.
это пакистан
1500 so ke new mil jate hy g
schon mal etwas davon gehört , dass man lager auch erhitzen kann um sie auf den sitz zu bekommen . hauruck schlosser
подсознательно ждал, что начнут электродом варить закаленную сталь
видимо не напрасно ждал
zuberdast
Sure, we believe you can fix that crank off a 50 yo 1 cylinder diesel that will never have enough compression to blow out a match. No, never in a million years.
Very nice
👍👍
😎 Mais a engrenagem ⚙️ foi soldada de lado como retirar depois 😮😮😮
Great job ! 👍👍👍
I Dont understand the reason for the pin connecting the two shafts other than allignment but you can do tha another way, cuz before all that area of the shaft was fused all the way from inside to out, but now with that pin and only welding over on top of that is only making a ring of contact between the two shafts which has to at least make it 25% weaker than what it was originally, the only good for that pin is sideways bending force as it will be locked in there as if it was a solid shaft but for rotation, its only a ring of contact and not even that thick and that pin isnt gonna help with the reducing any turning stress from that weld ring.
Amazing job mans, doing intresting work. wishing you good luck guys
А как перевез коленвал 😂😂😂😂😂😂😂😂😂в кармане
Big thing showing the honda name at every opportunity, but was the broken crank shaft honda , ....i think not
Maybe bonda..
@@trexmidnite it could be any brand , ...if I were a betting man I would put my money on it being cast in a Indian or Pakistani forge ,
Eixo virabrequim não pode faltar óleo no cater e nem passar da costa se faltar óleo deverá todas as engrenagem destempera e se parte
Professional Always Professional ❤👍
Plasma cutting, then welding and turning. Even if you hit this shaft with a sledgehammer, it will not break
bulloni
Токарь недоделанный , Махараджа долбанный .
Clearly you have never used a plasma cutter to cut a thick solid shaft just as you failed to see the heat discoloration on the crank / big end.
This was gut using an oxy / gas cutter and the discoloration is due to the large amount of pre-heat needed before cutting can commence.
very good pakistan number one
no,
カムシャフト
グリップローラー
My guess is these doctored up parts are sold to some poor unsuspecting victim seems scamming is the m.o. in their country.
Like
Опять всё точит одним единственным тупым резцом 🤣🤣🤣 наверное на второй нет денег
Good job
❤❤❤❤
Replacement crankshafts must be hard to come by in that part of the world
Sir you did not mention the price of this repair
Probably more than what a new single throw crank cost.
😯
У меня на лодочном моторе была подобная поломка, токарей по пальцам можно сосчитать, заломили цену больше нового коленвала.
А во сколько бы Вы лично оценили эту работу? Станок, навыки, электроэнергия и потраченое время.
@@TheNewerman The "value" of the work relates to IF it would even work in the first place and then what its life expectancy is.
Remember this IS NOT a "broken" crankshaft but one that has been deliberately cut up using an oxy-gas cutting torch.
Che saldatrici anno
animals ....
👍👍👍
👌
Qu'en je pense qu'il y a des cons qui arrose lors d'un usinage
Key way abit rough after all theeat work sorry 6/10
Could do better job ,there was some sloppy ness
Yet another FAUX TH-cam "clickbait2 special that is only fit to fill the scrap bin.
Good