Awesome video I finally managed to get one just the other day and it’s great id love to be able to run mine like you did , so I’m gonna make some mud in my yard lol.
I personally own trx6 snap-on hauler and I'm waiting for my pre order of two regular Trx6 Hauler but I'm in the process of making kits for working bed and Accessories and decals
With that soap you just forced into those bearings you're going to have to rebuild all those axles now or those bearings will rust up and seize because all the grease has been removed
It greatly improves break over angle however it does force one of your center driveshaft to be used as a skid plate so hopefully someone creates a skid plate for that. You can see what I’m talking about in my latest video with it rock crawling
As for me I wouldn't use high pressure, low pressure is okay. But always always blow it dry. Whether you use compressor or like myself I can use the exhaust side of my shop vac. If you don't have that use a household hair dryer. But absolutely blow it dry. After that to keep everything moving freely I silicone spray the entire chassis to and bottom and wipe it down. Works for me keeps them working and looking great. I hope this helped.
Yes Traxxas claims their electronics to need waterproof however it’s a good idea to keep in mind electronics and water do mix so you’re always chancing it. I have been testing Traxxas waterproof claim since 2008 and out of over 100 vehicles. I’ve only lost one ESC and one motor. This includes full submersion up to 4 feet underwater
My trx4 has good torque on low gear but once I put it in high it has less torque then low gear.if I get stuck on deep mud or is under pressure the high gear does not even move the wheels but low gear does move the wheels. I just changed the spur gear to a steel one so I’m not sure if that is the reason. Do you know why it’s doing that?
It sounds like what you’re referring to is a physic of gearing. Which is the higher the gearing, the less the torque and more ability on the top speed. The lower the gearing the more torue and lower ability on top speed. You could change the size of pinion/spur gear to effect it but I would just start with getting a Sensored brushless set up! Hobbywing is great! I’m a huge fan of the Hobbywing Fusion Line
Love the articulation
Nice to see you enjoying it to the fullest.. literally
Awesome truck 👍😮 good video
Thanks :)
I love mine. Waiting on Hobbywing fusion 2300 kills volt motor. Yes I said KV
I have 1800kv for almost 2 years and it's great!
Awesome video I finally managed to get one just the other day and it’s great id love to be able to run mine like you did , so I’m gonna make some mud in my yard lol.
Have mine on order! Thanks for the video!
I don’t know why this is on my feed, but I just spent $739 😆. Honestly it’s the most fun I’ve had in a long time. Thank you for posting.
Good video!
I personally own trx6 snap-on hauler and I'm waiting for my pre order of two regular Trx6 Hauler but I'm in the process of making kits for working bed and Accessories and decals
Great Vídeo! A very muddy spot! Cute 🐕!
Naice Footage! Loved and Subscrived! Cheers!
wow...perfect truck mate🏆🏆
It's the new Trx-6 stock from Traxxas...
Like...rc 👍💥👍💥
nice dog
Cool
Very cool our dogs could be siblings too lol!
Really cool 👍😍👍😁😁
Thank you!! Love this truck!!
nice video friend...
Nice!💪
Nice performance video !
Thanks for sharing!
PS: i'm going to get one...
I’ve got more videos coming too! Awesome, it’s a super cool truck for sure
@@cheneyrcgarage good news !
I have added my subscription to your channe, so I won't loose them !
Here You can see our RC channel if you like
th-cam.com/channels/r_jzynRy886LVUM-mqu8yw.html
RC Offroad Climb
Nice 💪🙂👍
Where is your firewood? Ha ha ha nice video!
Good idea!!!
I went rock crawling in my latest video and picked up some wood on the trail ;)
Beautiful video bro. Putting it to the test...will do one with mine someday
Really wish they put V3 configuration engine set-up in it
I’m not sure what you’re referencing
With that soap you just forced into those bearings you're going to have to rebuild all those axles now or those bearings will rust up and seize because all the grease has been removed
Every vehicle I have that gets exposed to water is periodically taken apart, cleaned, and packed with marine grease ;)
Is it hard to do that
Lol ur a weirdo
Nice video!! I’m thinking of taking my gas tanks and tool boxes off also. No issues taking to to the power washer ?
It greatly improves break over angle however it does force one of your center driveshaft to be used as a skid plate so hopefully someone creates a skid plate for that. You can see what I’m talking about in my latest video with it rock crawling
As for me I wouldn't use high pressure, low pressure is okay. But always always blow it dry. Whether you use compressor or like myself I can use the exhaust side of my shop vac. If you don't have that use a household hair dryer. But absolutely blow it dry. After that to keep everything moving freely I silicone spray the entire chassis to and bottom and wipe it down.
Works for me keeps them working and looking great.
I hope this helped.
Is this truck water resistant? I saw you were just spraying it down to clean it
Yes Traxxas claims their electronics to need waterproof however it’s a good idea to keep in mind electronics and water do mix so you’re always chancing it.
I have been testing Traxxas waterproof claim since 2008 and out of over 100 vehicles. I’ve only lost one ESC and one motor.
This includes full submersion up to 4 feet underwater
@@cheneyrcgarage awesome
Hi,
Very grateful for you. Can it run on "Spektrum" esc & motor for 4X4 not for "Crawlers" for speed on sand?
Thank you
Anything is possible with rcs!
My trx4 has good torque on low gear but once I put it in high it has less torque then low gear.if I get stuck on deep mud or is under pressure the high gear does not even move the wheels but low gear does move the wheels. I just changed the spur gear to a steel one so I’m not sure if that is the reason. Do you know why it’s doing that?
It sounds like what you’re referring to is a physic of gearing.
Which is the higher the gearing, the less the torque and more ability on the top speed. The lower the gearing the more torue and lower ability on top speed.
You could change the size of pinion/spur gear to effect it but I would just start with getting a Sensored brushless set up! Hobbywing is great! I’m a huge fan of the Hobbywing Fusion Line
Thanks for watching and stopping to chat!
HeyI love your channel you guys inspired me to start my own check it out Beast Rc