Hik Vision PT Camera DS-2CV2Q21FD-IW: How to WiFi Setup + Hik-Connect, by only Using Phone.

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ก.พ. 2025

ความคิดเห็น • 51

  • @DASH1497
    @DASH1497 ปีที่แล้ว +1

    Thanks for this good video

  • @viekhs
    @viekhs ปีที่แล้ว

    Thank you for sharing 😊

  • @RyanGodiee
    @RyanGodiee 8 หลายเดือนก่อน

    Thanks for sharing I really appreciate it

  • @stormlitsayala1572
    @stormlitsayala1572 6 หลายเดือนก่อน

    thank you sir.. God bless.

  • @Shaina30Magnaye
    @Shaina30Magnaye ปีที่แล้ว +1

    Hello if I got wifi connect it to my house and I'm going to move the camera to other house did I need to reconnect again?

  • @闹天宫武曲
    @闹天宫武曲 ปีที่แล้ว

    tq bro, and one more question,256gb can support how many hour?

  • @DanYeo-c7d
    @DanYeo-c7d ปีที่แล้ว

    When I set to audio mode will the camera unit hear my back ground noise ? Thanks

    • @securityproducthelper2971
      @securityproducthelper2971  ปีที่แล้ว

      Yes, usually will heard. U can adjust the gain by accessing by web browsing directly by computer.

  • @ronniedc08
    @ronniedc08 ปีที่แล้ว

    hi sir is this hikvsion Q1 can still continue record in sd card even when the wifi sudden down ? is there continues record if offlline?

    • @securityproducthelper2971
      @securityproducthelper2971  ปีที่แล้ว

      If u use this Q1 camera as standalone yes. Cause the camera will record to SD card, even WiFi is down.

    • @ronniedc08
      @ronniedc08 ปีที่แล้ว

      @@securityproducthelper2971 Hi Sir thank you!!. one more question sir .. if i use 256gb in Q1 hikvision although the capacity is 128gb .. is there is a possible to still work the 256gb sd card in Q1?

  • @cherlannerivas39
    @cherlannerivas39 4 หลายเดือนก่อน

    Hi can you show me how to reconnect that exact cctv to the wifi if ever we change the wifi password please

  • @alexshah7277
    @alexshah7277 2 ปีที่แล้ว

    Hi sir... How to set up full recording through apps... Now the device only recorded base only motion recordings..

    • @securityproducthelper2971
      @securityproducthelper2971  ปีที่แล้ว +1

      Not possible to change the record setting on apps for now, you may access to this camera setting by using web browser and the camera ip address then manually change it to 24h record

  • @86hafifi
    @86hafifi ปีที่แล้ว

    Hi sir, can i used power 5v 2A?..because cctv spec is 5V 1.4A

    • @securityproducthelper2971
      @securityproducthelper2971  ปีที่แล้ว

      Can, Ampere little higher ok, but dun over until 6A or above, might will harm to ur equipment

  • @phengkim2595
    @phengkim2595 6 หลายเดือนก่อน

    I have tried to reset my camera. Yet, the WIFI of camera still not exist which aren’t able to set up.

  • @winthanlay7664
    @winthanlay7664 2 ปีที่แล้ว

    How to setup that camera already used my sister and now she not used and forgot account and password? I would like to use it with new account? Thanks

    • @securityproducthelper2971
      @securityproducthelper2971  2 ปีที่แล้ว

      Hi sir, you can reset the camera by using the camera reset button (it is located beside the sd card slot). After done reset you will need to unbind the camera from previous account by using this method (th-cam.com/video/VJFKMz-iaS4/w-d-xo.html).Then you are good to go.

  • @dtkl36
    @dtkl36 6 หลายเดือนก่อน

    Hi Bro...how to change to another wifi network...? Right now connected to wifi 1...and I changed router with diff ssid. Want to change to wifi 2 with diff password.
    Besides that..how to upgrade the firmware..?
    Thanks in advance sir. Appreciate it.😊

    • @securityproducthelper2971
      @securityproducthelper2971  6 หลายเดือนก่อน

      @@dtkl36
      ~>Upgrade firmware:
      As long u able access to the web browser u can upgrade thru configuration > maintenance page there
      ~> changing of router + SSID
      However, this problem always happen ard my friend and SI. However, u need attach LAN cable to that camera and go to WiFi Setting to do it the connection.
      *i prefer u get a reyee wifi router eg:EW1800GX PRO, this model able broadcast 3 SSID, so can use 1 SSID for camera or ioT product

  • @harishamid5455
    @harishamid5455 ปีที่แล้ว

    Hi bro how to find that code. I cant see mine just a barcode only. Im using hikvision model DS which has no router yet

    • @securityproducthelper2971
      @securityproducthelper2971  ปีที่แล้ว

      Means your camera dun have barcode sn on it?

    • @harishamid5455
      @harishamid5455 ปีที่แล้ว

      @@securityproducthelper2971 yess

    • @securityproducthelper2971
      @securityproducthelper2971  ปีที่แล้ว

      @@harishamid5455 this is weird, Hik Vision, usually have provide QR code, to let enduser to scan. Kindly contact ur vendor.

  • @saralaaarchu337
    @saralaaarchu337 2 ปีที่แล้ว

    Hi..why my camera only shows red led..initially comes blue light but then go off..

    • @securityproducthelper2971
      @securityproducthelper2971  2 ปีที่แล้ว +1

      Try to reset camera thru the cover at the camera.
      It still red, i think u need try on manual. Please check on my manual add method for this PT camera

  • @EditoraClockTower
    @EditoraClockTower 11 หลายเดือนก่อน

    Thanks

  • @jelaneopiana6116
    @jelaneopiana6116 11 หลายเดือนก่อน

    Where to put the SD card po and can it be 256gb

    • @securityproducthelper2971
      @securityproducthelper2971  11 หลายเดือนก่อน +1

      right bottom of the camera lens, max only 128GB(after firmware upgraded)

  • @pawanpahwa4487
    @pawanpahwa4487 หลายเดือนก่อน

    How to turn on notification audio

  • @UmpakChupa-sv4ry
    @UmpakChupa-sv4ry 2 ปีที่แล้ว

    Hello do you have a firmware update for this PT camera DS-2CV2Q21FD-IW

    • @securityproducthelper2971
      @securityproducthelper2971  2 ปีที่แล้ว

      Hi, you can get the latest firmware of this camera from Hikvision official website

  • @zainabibrahim4316
    @zainabibrahim4316 2 ปีที่แล้ว

    「もっと多くの人が必要なので、このビデオをもっと

  • @pawanpahwa4487
    @pawanpahwa4487 หลายเดือนก่อน

    Notification audio on kaise karen

  • @claran41351
    @claran41351 9 หลายเดือนก่อน

    If I forgot the activation code how do I reset?

    • @claran41351
      @claran41351 9 หลายเดือนก่อน

      The wifi connect to camera I forgot the Pw. How do I reset? 😢

    • @securityproducthelper2971
      @securityproducthelper2971  9 หลายเดือนก่อน

      There are no choice, u need bring it down, and press the reset button located below on the camera

  • @danielong911
    @danielong911 ปีที่แล้ว

    I cannot add device even after resetting. After following all the steps my camera flashes red.

    • @waana8065
      @waana8065 ปีที่แล้ว

      Mine also the red light is on & tried to ask the seller to help till now no response😢

    • @securityproducthelper2971
      @securityproducthelper2971  ปีที่แล้ว

      Hi, if the method in the video is not work for you, you may check this out th-cam.com/video/Irq-xltVLOU/w-d-xo.htmlsi=H2qDavG18NjKWVa_

  • @ASPIreVChannel
    @ASPIreVChannel 4 หลายเดือนก่อน

    Playback pls using this and sdcard scheck

  • @RichardApolonio-ql4cb
    @RichardApolonio-ql4cb 6 หลายเดือนก่อน

    Hi connect

  • @maysimach7423
    @maysimach7423 10 หลายเดือนก่อน

    Yôu àre thé béßt

  • @maysimach7423
    @maysimach7423 10 หลายเดือนก่อน

    from hi

  • @cristianfenesan7168
    @cristianfenesan7168 2 หลายเดือนก่อน

    I'm sorry to have to tell you, but you don't really have the talent to explain how to proceed with this camera. But you can still try.