ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก

How to Change the Brake Booster on a 2000 Jeep Grand Cherokee

แชร์
ฝัง
  • เผยแพร่เมื่อ 14 ก.ค. 2020
  • Sorry for the typo in the video, meant to say, “also tough to install.”
    TOOLS & PARTS NECESSARY:
    -Listed in video.
    If you like my videos please subscribe, give me a thumbs up, and share with you friends! Thanks for watching, aloha!

ความคิดเห็น • 33

  • @christopherdominguezgonzal3185
    @christopherdominguezgonzal3185 3 ปีที่แล้ว +8

    How all mechanic videos should be done, straight to the point

    • @RoysGarage808
      @RoysGarage808  3 ปีที่แล้ว

      Glad you liked it and thanks for watching 🤙🏽🤙🏽🤙🏽

  • @kellytogashi7745
    @kellytogashi7745 4 ปีที่แล้ว +7

    I like the vice grip trick to hold the hood up

  • @stevehernandez6642
    @stevehernandez6642 2 ปีที่แล้ว +3

    Thanks. Just what I needed to guide me through fixing my Jeep. Watched you here in Las Vegas New Mexico, the original Vegas.

    • @RoysGarage808
      @RoysGarage808  2 ปีที่แล้ว +1

      Glad I could help, thanks for watching 🤙🏽🤙🏽🤙🏽

  • @jmvmike
    @jmvmike 11 หลายเดือนก่อน +1

    I really appreciate you taking the time to share this.
    I’m going to replace my booster this weekend.

  • @ArodiCruz
    @ArodiCruz 3 ปีที่แล้ว +2

    Great video! I needed to see how the master cylinder was removed so this helps a lot!

    • @RoysGarage808
      @RoysGarage808  3 ปีที่แล้ว +1

      Glad I could help, thanks for watching 🤙🏽🤙🏽🤙🏽

  • @miguelangelmendozamartinez4849
    @miguelangelmendozamartinez4849 3 ปีที่แล้ว +2

    Gracias me sirvió mucho este video. Pude cambiar mi Buster y ajustar mis frenos 😇👏 .
    Muchas gracias Roy 👍
    Saludos desde Tijuana MX.

  • @tonyarellano4194
    @tonyarellano4194 4 หลายเดือนก่อน

    Thank you for this video !!

  • @Tech_Shine007
    @Tech_Shine007 6 หลายเดือนก่อน

    This video is amazing. I'm doing some diagnostic work on my 2000 jeep for braking issues. The brakes pedal is stiff but it a delay in the brakes catching for vehicle to stop.

  • @danny48ify
    @danny48ify 2 ปีที่แล้ว +2

    Great job mister thanks

  • @pennypackmtb2542
    @pennypackmtb2542 ปีที่แล้ว

    Thanks for the video. Best one I found.

  • @jessietesch5029
    @jessietesch5029 9 หลายเดือนก่อน

    Why you was out there and trying to get the brake booster to line up how did you get that brace on inside the car to stay in place

  • @williamcheney8228
    @williamcheney8228 11 หลายเดือนก่อน

    Great video i have a question if i unhook the brake lines at the ABS unit to replace them at the same time as the booster will the new lines graved feed/fill with brake fluid and then bleed the same way as you show in your video? Thank You

    • @tonyarellano4194
      @tonyarellano4194 4 หลายเดือนก่อน

      I'm replacing the booster.on my Jeep, and by bleeding the lines from the calipers we can flush the old brake fluid!! I know this is an old video, we should change the fluid at least once in our lifetime!!😂😂

  • @slavicvolk
    @slavicvolk 2 ปีที่แล้ว

    Have a 2015 jeep Cherokee with low miles and the brake booster went out. Mechanic replaced it, went out again in 6 weeks. Replaced it again then said I needed to replace master cylinder…3 months later went out again and it’s currently at same shop for a week now. Jeep told him it’s a bad check valve but he thinks it’s due to recall W84 which is a transmission software flash…what is going on??

  • @digitaldreamer5481
    @digitaldreamer5481 2 ปีที่แล้ว +1

    Roy, when you completely removed the master cylinder, why didn’t you dump out all the old brake fluid then and clean that master cylinder up so it look brand new also before re-installing it?
    Personally, I hate working twice as hard as needed and I certainly don’t like doing the same job twice, just saying…

  • @daniellaboriel6100
    @daniellaboriel6100 2 ปีที่แล้ว

    I recommend the removal of the master cylinder ⁉️ Instead of the air filter housing. I highly recommend this procedure period 😃✅🌹🤗😍🥇

  • @daniellaboriel6100
    @daniellaboriel6100 2 ปีที่แล้ว +1

    Amazing how to get the job done ✅🙃

  • @jessietesch5029
    @jessietesch5029 9 หลายเดือนก่อน

    Where are you located at

  • @cj2xx42
    @cj2xx42 ปีที่แล้ว

    How can you tell if you have air in the brake lines by looking at it

  • @4_Low_Off_Road
    @4_Low_Off_Road ปีที่แล้ว

    What is the white gasket for on the booster?

    • @tonyarellano4194
      @tonyarellano4194 4 หลายเดือนก่อน

      The white gasket on the booster or another part connected to the firewall is to prevent outer noise and water from coming in and to keep good air compression inside the vehicle,

  • @tjs597
    @tjs597 4 ปีที่แล้ว +4

    you didn't have to remove the master c to remover booster...just remove the nuts from booster then pull back on master c..of course be careful not to break or crack brake lines...save time from bleeding brakes Etc...

  • @bsmith7496
    @bsmith7496 2 ปีที่แล้ว +1

    I like the Dumb ass clip mine didn't go on like that

    • @noahbarnett1124
      @noahbarnett1124 3 หลายเดือนก่อน

      How tf do you get this shit off I’m going damn crazy

  • @ChickenNoodle0404
    @ChickenNoodle0404 3 ปีที่แล้ว +2

    Charcoal canister??? Maybe I heard it wrong.

    • @RoysGarage808
      @RoysGarage808  3 ปีที่แล้ว +2

      Yep you heard it right, that is in fact a charcoal canister. It’s for your emission control system, it’s filters out the gasoline fumes. Thanks for watching 🤙🏽🤙🏽🤙🏽

    • @DK-wp2rk
      @DK-wp2rk 3 ปีที่แล้ว +1

      Its a california thing.

    • @hammerdick82
      @hammerdick82 2 ปีที่แล้ว +1

      @@DK-wp2rk Not necessarily, i bought a 2001 that was sold here in texas and it has one