Piaggio Liberty 150S ABS Scooter Oil and Filter Change Tutorial [4K]
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- Hope this helps! Please like and Subscribe🤟 @PiaggioOfficialPage @VespaMotorsport
🛵: 2019 Piaggio Liberty 150S ABS
Should apply to other current iGET motor Piaggio and Vespa 50cc, 125cc, 150cc scooters
including:
Piaggio Liberty
Vespa Sprint
Vespa Primavera
Please let me know if you have any suggestions or advice 😁
1 Quart Castrol 5W40 Full Synthetic Motorcycle Oil (Will need 2)👇
amzn.to/3ijdjgX
K&N 183 OEM Oil Filter👇
amzn.to/3Vb4lAJ
Craftsman 15/16 wrench👇
amzn.to/3VaNEW8
Oil Filter Wrench 9in. And 12in. (9inch may work better, 12 is slightly large but still works)
amzn.to/4bInNwl
📸 Shot on Insta360 OneX2: GET YOUR OWN👇
amzn.to/3pB29If
Oil Funnel Set👇
amzn.to/3XDQRiQ
Oil Drain Pan👇
amzn.to/3UdGeQT
#oilchange #tutorial #vespa #piaggio #oilfilter #change #filter #oil #diy #scooters #4k #howto #diy #share #viral #challenge #liberty150 #motorcycle #clutch ##beginners #step-by-step #recorder #insta360onex2 #gopro #insta360 #360 #dr05x #hjc #setup #helmet #fannypack #vlog #blog #vlogger #blogger #action #actioncam #harleydavison #kawasaki #suzuki #yamaha #twowheels #kneesinthebreeze #dr05x #motorcycles #roadtrip#compare #comparison #update #oneyearupdate #gigwork #gig #protip #doordash #ubereats #grubhub #150cc #fast #fastandfurious #dragrace #abs #motor #synthetic #vespasprint #vespaprimavera
1 Quart Castrol 5W40 Full Synthetic Motorcycle Oil (Will need 2)👇
amzn.to/3ijdjgX
thank you! very clear!
Hope it worked out for you! 😀
@@roadsterrevolution it did, oil changed! only problem was me unscrewing the big screw the other way for 5 minutes, as per usual 😅 thanks!
Thank You Now I can save 250 dollars. awesome
😂🤙
Appreciate the links, however that oil wrench is way too big for my filter
@@jamesnuzzi5085 try this one amzn.to/4bInNwl
The 12 works and will grip the filter with the teeth and you will still be able to remove it though the 9 inch may hold the filter more snug. 👍👍
Nice job!!
Hope it helped 🤙
I will try it again. I tried when it was 6 months, but it was impossible to get the drain plug loose. Now it has been serviced by Vespa, so hopefully it’s not as tight as last time.
Yeah give it another shot next time 👍
I really had to put a lot of muscle into it to get it loose and almost gave up. Make sure u have a good 15/16th wrench tho
amzn.to/3VaNEW8
@@roadsterrevolution
Isn't there using metric measurements in Europe? In other words, the right size should be 24 mm.
@@DarcyChu-fi6lf here's the official manual and maintenance guide if it helps
cdnmedia.endeavorsuite.com/images/organizations/05211b9c-b6c7-4840-8e84-2970c2318c24/Owners%20Manuals/Liberty%20150ie3V%20Iget%202018-19.pdf
@@roadsterrevolution
You are in Britain! no wonder!
@@DarcyChu-fi6lf 🤔
Thank you so much!
Glad to help 🤙
But manual is saying 10w 40 ?
@@kamalpreetsingh4356 As far as I know, it's always been 5W 40
seems pretty simple - but - off topic are you wearing OOfos?
Ahahah they are very, very comfortable 😂
So I did this today with a friend, 9 hours later... we got it done. The reason it took so long is because the wrench you suggested just would not remove the filter, it wasn't about strength, it was more about clearance and from the angles with so little clearance, it was just stripping the bolt. So then we tried a socket wrench, didn't have the right size. Went to a hardware store, the muffler pipe was in the way, so once again no clearance to put the socket wrench at all. Then we were going to remove the muffler, the screws were too rusty and in ONCE AGAIN, a shitty angle to remove. Why is every screw on this bike such a fucking bitch to get to!? Changing oil should be much more simple than this, everything is put in a stupid area.
So finally what we did was try the socket wrench again, but put it in slightly from an angle (with the muffler off to get a little leeway to move the pipe around, and we managed to get the first filter cap off. It also took long including the trips to the hardware store and trip back to his house to get a socket adapter, but man, they designed this shit so stupidly to change oil.
Also, the filter wrench you suggested did not fit around the filter, and it wasn't 1.4l to fill, it was around 1.1 for me. I'm not blaming you at all, but I want to save others headaches.
Wow sounds like you had quite the day! I had my friend help tilt the scooter slightly so that it gave a little more clearance for me to loosen the filter and the oil plug nut. The wrench and other tools all worked for me but I had to use a lot of strength because they factory torqued the hell out of em. They definitely don't make it easy to access some of the key areas. I'm glad you got it done though 👍👍
U change oil every 3k miles? Or how many miles?
~3 to 4k. Well I'm gunna try 😅
what oil filter is used for this oil change?
1 Quart Castrol 5W40 Full Synthetic Motorcycle Oil (Will need 2)👇
amzn.to/3ijdjgX
K&N 183 OEM Oil Filter👇
amzn.to/3Vb4lAJ
@@roadsterrevolution Thank you very much,just put 1600 miles on the scooter changed oil.Do you recommend I change filter as well,or should I wait?
@@rickeyrocket1 check out the official maintenance schedule chart towards the bottom cdnmedia.endeavorsuite.com/images/organizations/05211b9c-b6c7-4840-8e84-2970c2318c24/Owners%20Manuals/Liberty%20150ie3V%20Iget%202018-19.pdf
@@rickeyrocket1 I believe at your next oil change, you can do the filter as well
How many litres oil need ??
Around 1.4 qt / 1.3 liters with changing the oil filter too
How much total oil u used?? Was it 2qt or 1.4qt?
Around 1.4 qt with changing the oil filter too
@@roadsterrevolution I had a local shop do it for $20, my dealer would have charge me around 300 just to change oil hahah
@@rahi7339 LOLOL good find 👍👍