Yamaha Superjet TR-1 Freebie Mod
ฝัง
- เผยแพร่เมื่อ 23 ก.ค. 2023
- Taking a look at the TPS on the Superjet, trying to elevate the dead spot in the throttle. The first 15 to 20% of throttle at the lever gives no response from the engine. Big shout to @stuarthatfield6266 for the tip! Thanks for watching!
- บันเทิง
Great video and attention to detail all way down to that specific T25 Torx bit with the hole in it. I've only ridden my ski a few times and now I'm going to check out my throttle for any lag as well ✌
Keep up the great vids!
Awesome informational video, very well done and wish all subscribers benefitted..
Cool idea! Very detailed video. And now I have another shop tool I need to buy! Never heard of that type bit before.
Heck yah can never have to many tools 😎🤘🏼🔧
Thats a great work , I don’t think I can do it myself 😂
Lol definitely a little intimidating for sure!
Great Vid. One question though....the part where you are adjusting the TPS is filmed in the dark and slightly obscured by your hands. Can you explain exactly what you were doing? Looked like you were turning it clockwise. If that is correct, how big an adjustment...1/8th inch, 1/4 inch?? Thanks again!!
Appreciate it! Correct we were rotating the tps (black part) clockwise if you’re looking from tht side of the module. Id say its about a 1/8” for us but is definitely vital to do the procedure as we show in the video as every ski is different and to make sure you dont advance to far to the point it revs at any steering position. Thanks for watching! 😎🤘🏼
If you are looking for massive handling improvements two things WCOT scoop with jet dynamics ride plate.
Good job man, really keen on getting one of these...how would you recommend it?
Thanks! Love it. Get the best of both world, reliable and playfulness. Know if your going new u are more than likely gonna need to order it and ours took 6months to arrive since these are the only Yamaha ski made and assembled in Japan. All sitdowns are assembled here if ur in USA. Got any questions let me know! Standup is my favorite hobby cuz the learning curve is continuous. Still get better every time I go out even after riding for nearly 10 years. Its got the thrill of a motorcycle minus the higher risk of getting hurt. Thanks for watching 😎🤘🏼
@Floatsorrolls1 awesome, thanks so much🙏🏻 I'm actually from South Africa, I can pick up 2 tomorrow from our local dealer. So I'm in luck. Thanks so much for your feedback...greatly appreciated. Keep up the awesome Vids, I'll be keen to get some mods done to mine so I'll keep a look out for what you do🙏🏻
Hey mate cool vids. I've got a 2023 it's sick.
are you going to install a bilge pump?
If so can you do a video on it, there no info where to wire it all in.
Appreciate it! Havent really thought about the bilge yet. We have them on our 2 stroke standups. If we do install one will definitely make a video on it.
This is timely. I just installed a throttle lever on Friday and noticed that the lack of response while actually watching the throttle open and close. Instead of doing this I adjusted the cable tension at the lever to get rid of the gap. See any risk with that?
Yah tht would make it a little less noticeable for sure. We always liked to keep a coin head amount of play with the trigger to allow for variation in tension with the position of the steering.
Tps adjustment is way better
What did you spray on the ski at the end of the video?
Meguiars last touch detail spray. It smells like pina colada and we dilute 1:1 with water to make 2 gallons. It fairly cheap, safe on ceramic and wax and helps minimize scratching when wipe skis down. I do detailing for a living and use jt for tht as well. 😎🤘🏼thanks for watching here a affiliate link to it!
amzn.to/4ajRvHf
@@Floatsorrolls1 Thanks for the info! Great videos too. I just picked up a new superjet. Can't wait to get it on the water.
@@MRPINKBALLS12 appreciate it and congrats on the new ski! Looking forward to hear what u think!! 😎🤘🏼