How To Sharpen Bolt Cutters
ฝัง
- เผยแพร่เมื่อ 29 ส.ค. 2024
- How To Sharpen Bolt Cutters
Please Click The Subscribe Button Below!
Comments and questions are encouraged but please be respectful.
www.tricountylocksmithservice.com Please Click The Subscribe Button Below And Share Video With G+, Facebook, Twitter and all Your Favorite Social Media!
Comments and questions are encouraged but please be respectful.
www.tricountylocksmithservice.com
tricountylocksm...
All views and opinions are the alleged interaction with any product shown and not a fact stated by Wayne Winton and or Tri County Locksmith Service. The information shown in any video is 100% opinion of Wayne Winton and protected by the 2nd amendment, the freedom of speech. Some products may be provided by the company being reviewed and others are purchased independently by Wayne Winton, Tri County Locksmith Service. Either way it does not reflect the content of the review. All products are given a fair equal chance to perform. All videos are property of Wayne Winton and all rights are reserved. If you would like to post any video please contact Wayne Winton at: Tricountylocksmithservice@gmail.com for permission.
Disclaimer: Do not try this at home! Any content seen here is for entertainment only! Do Not try anything seen here yourself or there may be danger of bodily harm or legal consequences for your actions! Any illegal activity is prohibited and Wayne Winton and or Tri County Locksmith Service are not responsible for your actions!
Wayne Winton, © 2014. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of Wayne Winton. Please note that Wayne Winton, Tri County Locksmith Service does not state any confirmed facts only personal opinions. I am not directly affiliated with any of the vendors or manufacturers in this video. Wayne Winton, Tri County Locksmith Service is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the Wayne Winton, Tri County Locksmith Service film series broadcast on TH-cam is intended for entertainment purposes only.
Tri County Locksmith Service
1338 Grand Ave
Glenwood Springs
Colorado
81601
970-945-5625 970-963-5625 970-922-5625
Locksmiths United
#LocksmithsUnited
#Locksmithreviews
Locksmith Request
Fast, Friendly, Professional Service.
Locks, Locksmith, Locksmiths,
Lock Repair, Lock Re Key,
Home, Office, Business,
Panic Hardware, Door Closers,
Safes Opened, Safe Repair,
Safe & Vault Service,
Lockouts, 24 Hour Service
Aspen Locksmith, Snowmass Locksmith,
Basalt Locksmith, Carbondale locksmith,
Glenwood Springs Locksmith,
Silt Locksmith, New Castle Locksmith,
Great demonstration by a man who obviously knows his craft. Thanks for sharing 👍🏼
Great helpful video. First class way to restore a good pair of bolt cutters.
Cool! I see why you mentioned the importance of that adjustment screw, because it allows you to adjust the "teeth" so they can close like you want, which drastically increases the life of the tool. I found that if you could no longer sharpen the edges because you've done it 10,000 times or something crazy, you can replace that entire "cutting portion" (black area), but they are roughly 60-75% of the cost, so I suppose if it was me, I wouldn't mind buying a second pair FIRST, then buying replacement cutters, so I could compare my handles and know when one needed to stop being used, although of course, bearing that the cost would be offset by money made using the tool. It never hurts to have a backup tool that isn't "as good" and can be "abused" more, if needed.
Yea that is true. It is nice to have a backup. I have seen one really cool looking pair in a video but I have not been able to track them down. The have carbide (or really hard high carbon steel) replaceable jaws an they look mean as hell. forgin video though so may not be avaible in US yes.
Check it out here: Testing Abloy 342
Aww her they are. Kernn bolt cutters with really great replacabel jaw idea giving 3 X usage on one set of cutters. Sopper cool design. Damn it now I want....... shop.wirecutterstore.com/Krenn-Bolt-Cutter-with-Replaceable-Blades-K16-49_p_122.html
"Replacement Blades for Krenn K-Series Bolt Cutters Your Price: $50.00", that's much cheaper, assuming the build quality is up to par. Better for landfills and resource conservation.
I bought a bolt cutter from my local gas station for $8. It has 2 adjustment screws and kicks ass and takes names
It cracks me up, how the nannies on this thread feel overwhelmed to point out every negative things they all can point out...
I'll just watch, get info, and adopt what I like...
You do you Ill do me!! peace! PS Wayne... thank you, all you (Karens) go report people for BBQ'n in the park during quarantine
Thank You!!!
great help
Ok. I'll try it! Great video. Thank you.
Great job my friend 👏 👍
Nice blade guard. Ever have a disk break, when you do you'll be glad the guard was there
Gloves. I don't need a safety lesson
@@waynewinton never wear gloves on rotating tools. Helpful video though.
@@reckedo Good advice for lathes; I personally don't enjoy having the cartilage forcibly cut off of the back of my fingers. It doesn't hurt at first but it hurts a lot like a day into healing. You should use leather gloves when using an angle grinder.
I don't have an adjustment screw like that. Both large bolts move the cutters in and out. Clockwise to move in.
Thank you very much for a good, not show of, video. (I had to put the volume very high to hear you though, may be my end?).
From one of your reply I'm guessing mine (found from a previous owner may be) had dip dents in its jaws. and the adjusting bolt seems wrong and not holding the setting anymore, yes I'm guessing it must be el chipo from el China. I was lucky though, managed to cut many fence bits I had to, (but only 3 and 6mmm). I may not need it anymore but was curious about restoring it.
Thanx again. :)
Great idea and video! Might want to wear a face shield though. Cutting wheels can sometimes (if you have very bad luck) fragmate and blow up if used on their faces as opposed to their circumfurence. Haha although I'm sure we've all been guilty of doing it from time to time!
*fragmate
fragment
*circumfurence
circumference
My boltcutters got damaged from day one. When I looked at it today, I noticed it got damaged on one blade only. Looking at it closer, the side that got damaged was sharpened to a point (but not sharp enough to cut your finger). The other side had a flat spot across the blade, no damage. I don't have adjuster screws to adjust the blades closer, but there's stoppers towards the handle area I can trim down to get the blades closer. I was just looking for tips on sharpening. Thanks.
Would it help to apply ice or freeze the bolt cutters in ma fridge?😊
You have a problem somewhere. That adjusting bolt should not be that tight. Something is binding.
This is useful when this happens: (by [you] Wayne Winton) HK Porter Bolt Cutters Review
That's one way I guess I prefer to use the Japanese Whetstone cama cama and you will never overheat, but you will get it sharp
thank you
You are a wiz with an angle grinder, Wayne. I would have to take the jaws off the handles and do them on a bench grinder. With a pot of water for dip cooling.
mrmarkiz47 As long as they get sharp any way that works for you is great!
thank you a good how to vid
THX!
Thanks for informative video. Shouldn't you be wearing eye protection when doing this?
I was thinking hand protection for those sparks!
omg your face.... full face shield friend
Ha I have the same grinder and same bolt cutters
I was not fixing them, just trying to maintain them, as they were becoming harder to close and open, can you refer me to where I can get the info I need to put these back together, in the way they were.
Try and call HK Porter directly. They should know what to do. Good luck!
hey I have a pair of record 942 bolt cutters just leaves a mark on what ever ur cutting the blade appears to be flat would this work for my record bolt cutters
Depends on the steel. High quality bolt cutters like the HK ones shown here will sharpen and the edge will last a good long tome. Cheepy ones like the ones made in China you can sharpen and this will improve the cutting preformance but they will become dull quickly. In short .... it cant hurt to sharpen them. Good luck!
i have a cheap cutter nothing wrong it just has a litter space between jaws can u show how to remove space it does not adjust screw
Our HIT cutters adjust by turning the large bolts clockwise to get closer. They have arrows and tick marks to indicate adjustment. You will need to loosen the nuts on the opposite side and tighten them when you finish.
OK.
Why would you say if I bent them. Did I say I bent them? All I did was take every bolt and nut apart, cleaned the bolts and nuts, lubricated the bolts, then put it back together. Now when I try to close them to the closed position, they do not close consentrically, they just seem to flop every which way. Can't really explain it properly. But they are useless now that I tried to take care of them. Story of my life, killed them with kindness.
If it ant broke don't fix it.......
+David VanMeter thats prolly because the different bolts have different wearspots and wearpatterns. it seems impossible but having these tollerances change may make it flopy even if it wasnt before. but since you didnt change the shape of any of the parts you can take it apart again and change it untill it fits better then before. also what he said
Show me how to put the damn things back together so they function like they once did
If you bent them so the jaws don't line up your screwed.
Yes I wasn't helpful video