89 cr 250 comes factory red frame. Frame was painted white. Pro link is the suspension style. That's a factory swing arm painted with an oem Pro link sticker on it
As a regular viewer, I am inspired by your work ethic. I find myself more dedicated to executing the details needed to successfully complete my projects. Keep up the good work Joe. And get a bigger shop!
Old men up here in upstate NY. We all have xr100's or 150's. We have bigger stuff and smaller stuff but we have more fun on those small xr's. They are a blast
The frame is not a one of a kind on the CR It is just painted white. The Pro Link suspension is just what honda called their rear linkage system, its not an aftermarket performance part or anything. That guy don't know sheet!
Nice trade! The valve buckets on those 5 valve heads always get stuck. That 150f is really clean, you can tell it wasn't ridden much. Can't wait to see how the cr turns out!
The pro link swingarm is stock on the 250 and the frame was painted white. The yfz has a lowering kit in the front. The shocks should bolt straight to the a arms, not thoes brackets someone put on. And that fuel line going to the carb on the quad is not a fuel line, it's a gas cap breather. Replace with a straight piece of fuel line. You don't want all thoes bends in the line.
I hope your paying attention to having good ventilation in your garage. I’ve been watching several of your videos and I worry about your health (especially long term). Please consider getting a carbon monoxide detector if you don’t already have one, and remember to get lots of fresh air in your shop if you’re gonna be running those engines inside like you do.
Thanks for the great content.... Love watching your progress on fixing machines that i would have thrown in the towel on. You have great patience in the diagnostic process.
I’m impressed by your Full Send mentality, hard work and drive for what you love, completely enjoy watching your channel. Only thing your going to need before you know it is, based upon your drive, a new pole barn lol!
Man you're lucky to be able to leave nice bikes in the back of a pickup overnight. I live in a big metro area and would never try that. Too many thieves around here. Thanks for the video.
You should do a video taking your jump starter apart and removing that buzzer. I’m sure it will work fine without it. Lol. Love the videos by the way. 😁
Haha loved you running after the quad joe I think you got a great deal there mate and had vinnys approval too lol quad is sounding sweet and so is the 150 very clean machines all in all has any of your neighbour’s got a for sale sign outside there house yet 😂😂😂take care man awesome videos as always 🔧🔧🔧👌👍
one of the thrills of my day is watching you unload vehicles from trailers and trucks.. when they hit that point of no return things can get crazy.. Thanks for bringing us along Joe.
Folks are afraid of shimming and until people learn how to shim valves you'll always bag a bargain. I have to say I thought you'd come a cropper on this trade as the guy just was not committing himself to any straight answers whatsoever. This was a real good trade in the end. Well done.
No risk no gain. I hope you can get them running good. Nothing ventured nothing gained. It was a great deal for you. Electric start on the Honda 150 priceless.
I have a 2004 Yfz 450 and the position sensor on the thumb throttle went out so it wouldn’t do anything like when I would touch the throttle it would just die and it wouldn’t idle at all
You did great on that trade. The other guy got a good running machine he will have fun with. You got three to do what you do best. Bring new life to broken machines. And we get to enjoy watching you have so much fun and grow your collections.good times for both you and other guy.
That 250r is one BAADDD BIKE! Them 150's are wheelie bikes all the kids around my neighborhood have them and their always on one wheel down my street. Those 150s even being that old still sell for around 25 to 3 grand in my area
Definitely not telling everything he knew. Does the 2 stroke run good or needs a rebuild, I don't know... but you drove it around... does it have power or is it lacking.. lol
I haven't had motocross bike since Santa swapped my little italajet 50cc for a B.M.X one Christmas morning (never really forgave him for that,even at 7 years old i knew it was a bum deal)....but anyway like I said I haven't got a bike but really enjoy watching your channel,watching you get the trades and fixing them without knowing sometimes what the issue is,it's addictive and then seeing them fixed and running perfect,I think it's great.🤙 🏴
Awesome job as always, question what do you do with all these machines, yes I know you trade some and Im assuming you must sell a few here & there, Would love to see your whole collection again.
you should make yourself a nice place to unload things from your truck. Use your machine and make a berm to back up to. it would be much easier to load too. Your next truck needs a full size bed. It looks mini.
You're an inspiration to me. I think I have the aptitude to work on ATVs but I need a good master mechanic to teach me. I live in a place where all we use is ATVs. I don't know how much I can do cause I have a bad back and a shot arm. I currently need all my ATVs worked on. I've been looking for someone to fix them.
The jet in the bowl for the accelerator pump is reverse from what you would expect. The smaller the hole the more fuel it pumps so being completely clogged would be alright. Its basically a bypass back to the bowl when the diaphragm pumps
Amazing the way you confront challenges. Reviving classics when most of us live in a throwaway society, "it's broke, let's buy something else." From working in Dentistry, ERGONOMICS - you need to give a lift to save your back
Nice 3 for 1 video. If u wanna keep the fan hard wired to the ignition just make sure u keep it in a small battery tender or just a cheap trickle charger for sure. If not a new batt will be dead in 1 to 3 mo.
Living the dream mate,id love to be able to fix up bikes,get them running again and sell em on,just for a hobby and bit of profit,here in the UK there just isnt the stock of off road bikes as you have over there,love watching your videos brrraaap
Great video Joe I think you done a wonderful trade 1x quad 2x bikes for the Banshee is great deal gives you 3 videos for the channel and they all look in pretty nice condition especially the crf 150 definitely a low hours bike and there really fun to ride interested to see the next video and the cr 250 looks really nice aswell hopefully that runs and just needs a little bit of tweeks here and there great job on the yfz 450 with the valves and chims great to see vinny approved aswell have a great weekend take care bud 👊 💨
Hi I have been watching a lot of your videos and learned soo much about small engine rebuilding. Your videos are like a master class on motorcycle repair. I'm also not ashamed to admit I'll never understand how carburators work, they make absolutely no sense to me lol. I also wanted to ask about something else, some of the motorcycles you repair don't have valves like that old 125 you rebuilt. I'm curious what advantage valves and cams give you over the older way they built 2 cycle motors with out them? Is it more horse power and better fuel management? Just curious. Thanks for your videos and all of the great information.
I see a set of lug spacers on the front. Those are a little sketchy but they look like they are just 1 inch so not so bad. I got a banshee recently that had like 2.5 inch lug spacers on it all the way around. Super sketchy!
I CAN NOT STAND the way those blue rags sound on camera😂😂😂 now I would just like to say thank you for the videos, it nice to see someone go through the entire diag process and not bullshot when something is wrong.
Everybody's got Banshee fever lol. I love 'em in a straight line, but take one to the track (motocross) and see how they do. They don't handle at all well and a little 4 stroke will blow 'em away every time. If some one were to install a Banshee engine on a modern frame, one with racing suspension tuned for their weight and riding style, they'd have one Hell of a racing machine on their hands. You got a great deal on your trade Joe. Wanting to see what you find out about the bikes next.
I was thinking the worst but your excitement was nevertheless a bestseller to keep me watching. We are lucky that you put out so often it’s like spending time with a friend!!
Love your videos and i got to give you praise for how mechanically inclined. You should have been an Engineer. Have to ask how do you avoid stolen bikes and your procedure if you end up with one.
Nice deals man! Your such a great inspiration and whenever my girl tells me I buy too many bikes I show her how many you’ve bought in the last month ! You never fail me 😆
@@e5m956 there is no need to if you put fresh oil before and drain gas from carbs and gas tank or sometimes fill the tank up all the way so there is no space for condensation if you plan to take ur bike out once n a while during off season in that case yes start it at least once a week and let it full warm up and check if everything is still in working order check brakes clutch lights etc and make sure no one has made a home in ur airbox or exhaust pipe
@@very.rare_rex - Problem is there rarely is a plan. One day its 15f, two days later it can be 54f. So I would like to ride as much as possible, but unpredictable weather can tie me up for a couple months and this ethanol gas also sucks for sitting around. My ATV is fuel injected but I have been trying to keep the fuel tank full and leave the battery plugged into a maintainer when parked.
@@e5m956 in that case i recommend starting and warming up at least once a week and id add a fual additive to it i swear by k100 for carbs and injectors
Noticed the fan always comes on when the key gets turned on. Thats not normal, definitely won't hurt anything but it will run at a lower than normal temperature and prematurely wear out the fan motor.
Joe please swap your jumper pack for another that doesn’t beeeeeeeeep 😂 It’s killing me bro makes me distressed now change it please 🙏🏻 Awesome vids too man
Hey guys some help please, someone knows anything about drilling holes on the skirt of the piston towards de exhaust hole for lubrication 2strokes engines 🙏🏼 thanks
![CAMPปลิ้น | EP.82[2/2] เมาท์มอยกับ 3 สาวเพื่อนซี้ ที่พร้อมขยี้พ่อหมีได้ทุกเมื่อ](http://i.ytimg.com/vi/Wwn7WnylNtQ/mqdefault.jpg)
That seller wasn't "to sure" about anything you asked him 😅, buyer beware.
Scam
Stolen
I think he was a bit drunk TBH.
Where did the guy steal them ?
Cry more ppl
Cracked me up when you pushed the Quad of the trailer and had to run after it 😂I'm glad you don't edit things out like that.
Hahaha
he keeps it real! what a score
Thought he lost it 4 sure!!😅
!!! 🤣🤣
89 cr 250 comes factory red frame. Frame was painted white. Pro link is the suspension style. That's a factory swing arm painted with an oem Pro link sticker on it
I was loling when he said ' you think its a pro-link swing arm'
I agree with you I would say its powder coated white
There was an 89 90 CR250R that had a white frame, it was rare but they were out there. At the time it was inspired by the Pepsi endorsed race bike
As a regular viewer, I am inspired by your work ethic. I find myself more dedicated to executing the details needed to successfully complete my projects. Keep up the good work Joe. And get a bigger shop!
He's got plenty of room to blow out the side his 'space' is in on that garage!
Same here always watch... GREAT learning experience 👍🏾!!
Jesus loves you
Shut up
Invest in a exhaust system in the shop or open the door prior to starts - carbon monoxide does build up over time ! Love your videos
Old men up here in upstate NY. We all have xr100's or 150's. We have bigger stuff and smaller stuff but we have more fun on those small xr's. They are a blast
Vinny is a great dog who knows his machines. Always interesting and fun to watch you work
He is a great dog!
@@2vintage What kind of dog is he? He looks like a mini goldendoodle.
What a great deal! Those banshees sell for so much nowadays and you can trade them for a lot of stuff! You’re rippin out the content for us!
i have a 2000 es honda that keeps back fireing whats rong
@@patrickloper9658 Probably needs a good carb clean. If that doesn't help it probably needs a valve adjustment.
The frame is not a one of a kind on the CR It is just painted white. The Pro Link suspension is just what honda called their rear linkage system, its not an aftermarket performance part or anything. That guy don't know sheet!
Nice trade! The valve buckets on those 5 valve heads always get stuck. That 150f is really clean, you can tell it wasn't ridden much. Can't wait to see how the cr turns out!
Try using a specific sized coin and pliers to remove those "straight slot" inspection side cover screws. Hate seeing them all butchered.
$2k for the CR 250? I'll buy it from you right now as it sits.
You definitely got an amazing deal! 3 very nice machines for 1 decently nice machine. Definitely got the winning hand bro.
Banshees are blowing up big in value now. There aren’t so many of them.
@@IamBATMAN2024 Also had a bad vin
@@goodchannelname4046 it can be fixed 😅
I hate when someone throws a graphics package on and then wants to add the price of that on top a polished turd. We find those a lot were i'm from.
The pro link swingarm is stock on the 250 and the frame was painted white. The yfz has a lowering kit in the front. The shocks should bolt straight to the a arms, not thoes brackets someone put on. And that fuel line going to the carb on the quad is not a fuel line, it's a gas cap breather. Replace with a straight piece of fuel line. You don't want all thoes bends in the line.
It's strange to me that someone with such mechanical know-how wouldn't know that or what Ohlins shocks are lol.
@@e5m956 i didnt think those were stock shocks lol
I hope your paying attention to having good ventilation in your garage. I’ve been watching several of your videos and I worry about your health (especially long term). Please consider getting a carbon monoxide detector if you don’t already have one, and remember to get lots of fresh air in your shop if you’re gonna be running those engines inside like you do.
Lol
!!! 🤣🤣🤣
Luv the 150F big time, we never see them up here used. Good trade for sure Joe. Made my Sunday
Love them too. I had one when i was a teenager and rode the piss out if it 🤙
Thanks for the great content.... Love watching your progress on fixing machines that i would have thrown in the towel on. You have great patience in the diagnostic process.
These videos are great , really goes through step by step diagnosing
The quad rolling off the trailer is prime comedy…
I’m impressed by your Full Send mentality, hard work and drive for what you love, completely enjoy watching your channel. Only thing your going to need before you know it is, based upon your drive, a new pole barn lol!
Man you're lucky to be able to leave nice bikes in the back of a pickup overnight. I live in a big metro area and would never try that. Too many thieves around here.
Thanks for the video.
It’s the bleks
@@VURGINNthem basketball Americans
I've been watching you for a long time and it amazes me just how far your knowledge of ATVs and bikes has came hats off to you my friend
You should do a video taking your jump starter apart and removing that buzzer. I’m sure it will work fine without it. Lol. Love the videos by the way. 😁
I absolutely love your series keep up the great work man!
Haha loved you running after the quad joe I think you got a great deal there mate and had vinnys approval too lol quad is sounding sweet and so is the 150 very clean machines all in all has any of your neighbour’s got a for sale sign outside there house yet 😂😂😂take care man awesome videos as always 🔧🔧🔧👌👍
You need a website for everything you have for sale.
one of the thrills of my day is watching you unload vehicles from trailers and trucks.. when they hit that point of no return things can get crazy.. Thanks for bringing us along Joe.
Folks are afraid of shimming and until people learn how to shim valves you'll always bag a bargain. I have to say I thought you'd come a cropper on this trade as the guy just was not committing himself to any straight answers whatsoever. This was a real good trade in the end. Well done.
No risk no gain. I hope you can get them running good. Nothing ventured nothing gained. It was a great deal for you. Electric start on the Honda 150 priceless.
I crf150s are going for 2500 to 3k here in Chicago very hard to get
I just have got a 09 wr 300 husqvarna and got a good deal on it it's a very strong running bike it's a 2 stroke.
I have a 2004 Yfz 450 and the position sensor on the thumb throttle went out so it wouldn’t do anything like when I would touch the throttle it would just die and it wouldn’t idle at all
You can take compressor and blow through the fuel line and it help with sticking float and blow out jets. just a quick fix of course
That cr250 never came with a white frame. It was painted at some point. Along with the swingarm
Bypass the radiator can switch and install a on and off switch. Save your battery and fan.
You did great on that trade. The other guy got a good running machine he will have fun with. You got three to do what you do best. Bring new life to broken machines. And we get to enjoy watching you have so much fun and grow your collections.good times for both you and other guy.
That’s crazy I posted my raptor 700 on Facebook and this guy wanted to trade that 450 for it
That 250r is one BAADDD BIKE! Them 150's are wheelie bikes all the kids around my neighborhood have them and their always on one wheel down my street. Those 150s even being that old still sell for around 25 to 3 grand in my area
What banshee did you trade ? The 800$ one ? That's a deal of a lifetime if so.
Cool trade 3 for 1 amazing. Have you thought about getting a jet ski as you are so close to a lake?
You could sell that 150 for 4k in my area lol. No matter where you are that was a good deal
Man what a beautiful home site you've got there! We just don't have land like that in Tampa anywhere!
Guy was sketchy asf
Guy keeps sayin..I'm not sure...
@@gman77gas Maybe the guy jus have little to no knowledge on it.
Definitely not telling everything he knew. Does the 2 stroke run good or needs a rebuild, I don't know... but you drove it around... does it have power or is it lacking.. lol
Decent deal
@@gman77gas😊😊😊00
😂fffffffffffffffffff
Would’ve def kept the banshee in my opinion.. bikes are gold!
I haven't had motocross bike since Santa swapped my little italajet 50cc for a B.M.X one Christmas morning (never really forgave him for that,even at 7 years old i knew it was a bum deal)....but anyway like I said I haven't got a bike but really enjoy watching your channel,watching you get the trades and fixing them without knowing sometimes what the issue is,it's addictive and then seeing them fixed and running perfect,I think it's great.🤙 🏴
20:30 the spark plug is missing the little cap that helps it snap into the boot
YFZ runs a "C" series plug without the terminal cap
love all your videos keep going, learnt a lot from you :)
The 150 is the real hidden gem.. it’s clean.. 2k easy
With the quality and resale value of Hondas. I would definitely say you got a good deal.
yeah with that crf150 it made the deal worth it but just the cr250 and yzf 450 are not worth a banshee in my country...
Great trade,that YFZS ready to rip like the band U2....With or without you.
Always make my day when you post
Yea definitely whenever he says the 4 wheeler runs and it doesn’t
That's just one of the great things about 2 strokes ; top ends are cheap and easy....👍
Awesome job as always, question what do you do with all these machines, yes I know you trade some and Im assuming you must sell a few here & there, Would love to see your whole collection again.
you should make yourself a nice place to unload things from your truck. Use your machine and make a berm to back up to. it would be much easier to load too. Your next truck needs a full size bed. It looks mini.
You're an inspiration to me. I think I have the aptitude to work on ATVs but I need a good master mechanic to teach me. I live in a place where all we use is ATVs. I don't know how much I can do cause I have a bad back and a shot arm. I currently need all my ATVs worked on. I've been looking for someone to fix them.
Nice trade, would not mind having the CRF150. The yzf is a nice looking machine. Great trade for sure. on those two alone.🙂
I didn’t realize a banshee was so valuable…..nice trade!
The jet in the bowl for the accelerator pump is reverse from what you would expect. The smaller the hole the more fuel it pumps so being completely clogged would be alright. Its basically a bypass back to the bowl when the diaphragm pumps
@text-1203 bruh lmao
Always a great day when joe posts
Amazing the way you confront challenges. Reviving classics when most of us live in a throwaway society, "it's broke, let's buy something else."
From working in Dentistry, ERGONOMICS - you need to give a lift to save your back
Yes,but if there weren't throw away type people there would be junk for us to fix.. big circle
Man I wish I lived closer to you bud, your very good at what you do. And that was a great trade. Hoosier Wing 🌟🇺🇸💫👍🏻
That CR is awesome
Try to find a KTM 525 xc , would love that ! Keep up the good video !!
Nice 3 for 1 video. If u wanna keep the fan hard wired to the ignition just make sure u keep it in a small battery tender or just a cheap trickle charger for sure. If not a new batt will be dead in 1 to 3 mo.
I'll take the 250 that is nice!
Excellent video, looks like a good deal for you. Seller sounded a little shady however?
Do us a favor, and fill the beeper on your start booster with glue.
That cr 250 is going to be a great bike if you keep it. I raced one when I was younger, they are great bikes........ 🔥
Sweet deal,we all love them banshees,but you won on that deal, that cr is nice,man you rocking it,good video man
Living the dream mate,id love to be able to fix up bikes,get them running again and sell em on,just for a hobby and bit of profit,here in the UK there just isnt the stock of off road bikes as you have over there,love watching your videos brrraaap
New sub, love your video very informative respect and thanks man!
Good Trade brother.. it's just so annoying when people do a cheap dollar store paint job on nice quads they shouldn't even be allowed to own one!!
Great video Joe I think you done a wonderful trade 1x quad 2x bikes for the Banshee is great deal gives you 3 videos for the channel and they all look in pretty nice condition especially the crf 150 definitely a low hours bike and there really fun to ride interested to see the next video and the cr 250 looks really nice aswell hopefully that runs and just needs a little bit of tweeks here and there great job on the yfz 450 with the valves and chims great to see vinny approved aswell have a great weekend take care bud 👊 💨
Hi I have been watching a lot of your videos and learned soo much about small engine rebuilding. Your videos are like a master class on motorcycle repair.
I'm also not ashamed to admit I'll never understand how carburators work, they make absolutely no sense to me lol.
I also wanted to ask about something else, some of the motorcycles you repair don't have valves like that old 125 you rebuilt. I'm curious what advantage valves and cams give you over the older way they built 2 cycle motors with out them? Is it more horse power and better fuel management? Just curious. Thanks for your videos and all of the great information.
Very much enjoying your work. Saw the ice fishing stuff..been doing it since 84!
Your reaction of quad coming off trailer was priceless. She Gone!!!!
I see a set of lug spacers on the front. Those are a little sketchy but they look like they are just 1 inch so not so bad. I got a banshee recently that had like 2.5 inch lug spacers on it all the way around. Super sketchy!
Man I would love to find a cr250 to rebuild
I CAN NOT STAND the way those blue rags sound on camera😂😂😂 now I would just like to say thank you for the videos, it nice to see someone go through the entire diag process and not bullshot when something is wrong.
Yea those rags are like fingernails on a chalk board.
Everybody's got Banshee fever lol. I love 'em in a straight line, but take one to the track (motocross) and see how they do. They don't handle at all well and a little 4 stroke will blow 'em away every time. If some one were to install a Banshee engine on a modern frame, one with racing suspension tuned for their weight and riding style, they'd have one Hell of a racing machine on their hands. You got a great deal on your trade Joe. Wanting to see what you find out about the bikes next.
I was thinking the worst but your excitement was nevertheless a bestseller to keep me watching. We are lucky that you put out so often it’s like spending time with a friend!!
If I left my bikes in the back of my truck overnight they would be good as gone
Love your videos and i got to give you praise for how mechanically inclined. You should have been an Engineer.
Have to ask how do you avoid stolen bikes and your procedure if you end up with one.
Nice deals man! Your such a great inspiration and whenever my girl tells me I buy too many bikes I show her how many you’ve bought in the last month ! You never fail me 😆
Crf150 is a awesome trail bike
i work at a motorcycle dealership as a set up mechanic on a regular especially during winter we will get a quad we have on display (brand new with
Do you recommend starting a motor once a week during off seasons or storage?
@@e5m956 there is no need to if you put fresh oil before and drain gas from carbs and gas tank or sometimes fill the tank up all the way so there is no space for condensation if you plan to take ur bike out once n a while during off season in that case yes start it at least once a week and let it full warm up and check if everything is still in working order check brakes clutch lights etc and make sure no one has made a home in ur airbox or exhaust pipe
@@very.rare_rex - Problem is there rarely is a plan. One day its 15f, two days later it can be 54f. So I would like to ride as much as possible, but unpredictable weather can tie me up for a couple months and this ethanol gas also sucks for sitting around. My ATV is fuel injected but I have been trying to keep the fuel tank full and leave the battery plugged into a maintainer when parked.
@@e5m956 in that case i recommend starting and warming up at least once a week and id add a fual additive to it i swear by k100 for carbs and injectors
That dog knows his quads bro 🤣
Been watching your vids a long time ..are you self taught? or did you go to school or work at a shop.. ?? super curious.
Noticed the fan always comes on when the key gets turned on. Thats not normal, definitely won't hurt anything but it will run at a lower than normal temperature and prematurely wear out the fan motor.
are you hearing the fan on the jump pack maybe?
This guy REALLY wanted a banshee.
You should put a 6 foot block going across to stop it from rolling all the way. Like a speed bump. Good content really enjoy your videos.
Joe please swap your jumper pack for another that doesn’t beeeeeeeeep 😂
It’s killing me bro makes me distressed now change it please 🙏🏻
Awesome vids too man
Good evening it's 4:10 Airazona you got a good Trade!! Pretty awesome...
Hey guys some help please, someone knows anything about drilling holes on the skirt of the piston towards de exhaust hole for lubrication 2strokes engines 🙏🏼 thanks
You fixed the neutral light to, I didn't see it on before.
I had a 150 f it was a fun bike, super reliable.
Hey man can do you know where I can find a top end kit for a 1990 kx250? My father in law needs one so we can rip together!
Don’t do itttttttt Joe!!!!!!!!
woah sick deal , if anyone deserves it you do sir 👏
Choke is of when it’s down on that crf150f I have the same bike but a 06 unkillable bikes