Thanks brother but in the end I did not fitted the motor because the motor mount was to small for the motor it's a shame. So I put back the stock motor which is 1450kv rocket
Thanks mate yeah I haven't got around doing the 8s setup yet but watch my TH-cam channel I will be doing a upgrade coming soon. 6s to 8s on the MX-07 much more power
@@Moggmodels23 awesome sir I just found out about this model yesterday but I look forward to seeing more . I have ran the same size can in a Arrma Kraton on 8s it’s lighter but with 2 28k rpm high flow rocket fans it did fine . Also . I dunno if the issue with that 49 can motor is the circumference or the Actual mount hole line up … I been swapping all my screws to socket head so there’s less stripping and looks like your mount already had socket head built in ! Very impressive. But if the mount lines up and all you need is a few extra mm to fit that can maybe some washers under the motor mount and front diff mount would let it fit. I’ll forward to seeing your build 😀
Just to clarify I ran a spektrum 160 8s esc and same can motor with same kv you have but on the smaller Kraton 1/8 6s truck - not the heavy 1/6 scale 8s Kraton.
hello mate nice upgrade, i like spektrum stuff. ive just got an mx07 but the esc has a strange power curve and neutral throttle postion is odd and moves too so thinking its not been calibrated right. dont suppose you know how to calibrate it, cant find any info anywhere.
thanks for the reply mate, mine has no other buttons just on off switch. think il just shed it till i get a max 6 because its undrivable at min, its is odd though, if i come off the throttle and then go back on it feels like it take a few sec before it revs up.@@Moggmodels23
1450kv x 33,6V = 48 720 rpm. Why do you say the 1450kv motor will blow up if it only makes 48K rpm at fully charged 8S battery? It is good for 50K rpm. Please elaborate since I am considering to buy KIT or 8S RTR.
Thank's likewise. Yeah, I have that 1450kv motor in an ZD 8 scale and it runs great on 8S. However if I get the MX-07 and wish to upgrade the motor, I will have issues above 4990 size. Hobbywing doesn't currently seem to have any motors below 56xx for 8S, and for can size above 49xx there is no motor mount for the MX-07. Also with bigger can size you have 8mm bore for the pinion gear. Only the ZD Racing EX-07 has a mount for bigger motors, part number 8593. But it says it is specificly for the EX-07 (maybe if one would screw new holes in the bottom plate it may fit, if differential goes in?). Good luck, the MX-07 should even be a better pound for pound basher than the XMAXX.@@Moggmodels23
cool motor upgrade brother
Thanks brother but in the end I did not fitted the motor because the motor mount was to small for the motor it's a shame. So I put back the stock motor which is 1450kv rocket
Ya i saw someone put the 1250kv spectrum smaller can still 8s in one . Hope you get one of those (49mm i think )
Thanks mate yeah I haven't got around doing the 8s setup yet but watch my TH-cam channel I will be doing a upgrade coming soon. 6s to 8s on the MX-07 much more power
@@Moggmodels23 awesome sir I just found out about this model yesterday but I look forward to seeing more . I have ran the same size can in a Arrma Kraton on 8s it’s lighter but with 2 28k rpm high flow rocket fans it did fine . Also . I dunno if the issue with that 49 can motor is the circumference or the Actual mount hole line up … I been swapping all my screws to socket head so there’s less stripping and looks like your mount already had socket head built in ! Very impressive. But if the mount lines up and all you need is a few extra mm to fit that can maybe some washers under the motor mount and front diff mount would let it fit. I’ll forward to seeing your build 😀
Just to clarify I ran a spektrum 160 8s esc and same can motor with same kv you have but on the smaller Kraton 1/8 6s truck - not the heavy 1/6 scale 8s Kraton.
Do you have a long term review update of this truck? Compare it to a redcat vigilante?
Hi no sorry sold it on now thanks for checking in anyway 😊
@@Moggmodels23 awww why did you sell it? How was your experience I would love the details
hello mate nice upgrade, i like spektrum stuff. ive just got an mx07 but the esc has a strange power curve and neutral throttle postion is odd and moves too so thinking its not been calibrated right. dont suppose you know how to calibrate it, cant find any info anywhere.
Hi hello mate not sure I think you calibrated it has the same way as you would a max 8 or max6 there should be a reset button on there 😉
thanks for the reply mate, mine has no other buttons just on off switch. think il just shed it till i get a max 6 because its undrivable at min, its is odd though, if i come off the throttle and then go back on it feels like it take a few sec before it revs up.@@Moggmodels23
1450kv x 33,6V = 48 720 rpm. Why do you say the 1450kv motor will blow up if it only makes 48K rpm at fully charged 8S battery? It is good for 50K rpm. Please elaborate since I am considering to buy KIT or 8S RTR.
Hi buddy thanks for getting back to me yeh so you saying 1450kv will be good for running 8s no problem yes 😊
Thank's likewise. Yeah, I have that 1450kv motor in an ZD 8 scale and it runs great on 8S. However if I get the MX-07 and wish to upgrade the motor, I will have issues above 4990 size. Hobbywing doesn't currently seem to have any motors below 56xx for 8S, and for can size above 49xx there is no motor mount for the MX-07. Also with bigger can size you have 8mm bore for the pinion gear. Only the ZD Racing EX-07 has a mount for bigger motors, part number 8593. But it says it is specificly for the EX-07 (maybe if one would screw new holes in the bottom plate it may fit, if differential goes in?). Good luck, the MX-07 should even be a better pound for pound basher than the XMAXX.@@Moggmodels23
@Blahablahaish yeah I agree the MX-07 is a better truck than the Xmax I think it's more heavy 🤔