If you’re going to be putting LEDs near the very back of your motorcycle MAKE SURE to get a couple extension strips along with it, you will need it because in my experience with my 2012 Yamaha R1 without the extensions they weren’t long enough. Not a bad thing at all just a little FYI, great product, I love them and it works just like it says it does. I have LEDGLOW on my car too!
Thank you. This is the first video where somebody doesn't actually already have the lights in the stall and goes I ain't that pretty! All you do is click the button. I think we all understand that part. I was just wondering where the hell do you plug the wires into once everything is adhered to the motorcycle
Had these lights on a bike for 2years. I installed a switch to cut power to the controller due to it regularly flaking out. The only way to reset it was to take my seat off every time and remove/replace the controller fuse. Loved the lights but that was a pain until I installed the switch.
I think I'm having that problem. I took mine to harley to put them on. I told them I can't get the lights to come on and was told it should be a switch somewhere I haven't found it. So annoying.
We do not have a video specifically for that yet but all you need to do is attached the tubes to the brake or struts and secure the wire to the brake line.
I love my lights and how they came out, i just have one question for anyone who also has the kit. Whats the longest have you left your lights on with the bike off?
The controller has very little draw on the battery in the short term. However, with that said, if the bike sits for a very long time without being run such as over the winter then yes, it will contribute to the battery being drained.
does the controller remember what color you set it too if operated with the hardwired switch? also can you have only one channel respond to the brake light instead of all channels ?
Yes, the controller remembers the last color selected. No, when the brake like wire is connected it can only affect the entire kit and every light that is connected.
If the brake light wire is connected to a brake light source on the bike, the kit will turn complete red when the brake is pulled and then will turn back to your set color once the brake is released. It is meant to be an added safety feature.
Can I choose how many strips I want to use in the zones? For example,....if I wanted 4 strips for zone 1 and 8 strips for zone 2 can I do that or if I wanted 2 strips for zone 1 and 10 strips for zone 2 can I do that?
Depending on which kit you purchase, you can place the strips where ever you want, however, the zones will always need to remain the same amount of strips.
If you’re going to be putting LEDs near the very back of your motorcycle MAKE SURE to get a couple extension strips along with it, you will need it because in my experience with my 2012 Yamaha R1 without the extensions they weren’t long enough.
Not a bad thing at all just a little FYI, great product, I love them and it works just like it says it does. I have LEDGLOW on my car too!
what length of extensions did you get?
Are you able to have 2 different colors like shown in the video? Or would I need 2 different kits?
What kit would I get to make different strips different colors basically?
how do i install the brake light cable?
Thank you. This is the first video where somebody doesn't actually already have the lights in the stall and goes I ain't that pretty! All you do is click the button. I think we all understand that part. I was just wondering where the hell do you plug the wires into once everything is adhered to the motorcycle
Had these lights on a bike for 2years. I installed a switch to cut power to the controller due to it regularly flaking out. The only way to reset it was to take my seat off every time and remove/replace the controller fuse. Loved the lights but that was a pain until I installed the switch.
I think I'm having that problem. I took mine to harley to put them on. I told them I can't get the lights to come on and was told it should be a switch somewhere I haven't found it. So annoying.
so i can just stick under tank before the lip? or can it be mounted inside the lip? more towards the center frame?
Yes
Can you provide a video that shows how to install the wheel lights?
We do not have a video specifically for that yet but all you need to do is attached the tubes to the brake or struts and secure the wire to the brake line.
I love my lights and how they came out, i just have one question for anyone who also has the kit. Whats the longest have you left your lights on with the bike off?
Separate lithium battery
Excellent video. Thanks!
Does the bluetooth receiver drain your battery if you don't add in a switch to turn on and off the signal?
The controller has very little draw on the battery in the short term. However, with that said, if the bike sits for a very long time without being run such as over the winter then yes, it will contribute to the battery being drained.
does the controller remember what color you set it too if operated with the hardwired switch?
also can you have only one channel respond to the brake light instead of all channels ?
Yes, the controller remembers the last color selected.
No, when the brake like wire is connected it can only affect the entire kit and every light that is connected.
How are you able to have 2 different color leds?
This particular kit has a dual zone feature that allows sections to be different colors.
Looks like a great product. What strip count did you install on this bike? 16 piece?
Yes, this particular kit was a 16pc kit.
Thank you for your help
How much did it cost
*Everything...*
Does the brake light wite need to be connected?
No, the brake light feature is optional.
@@ledglow whats the brake light wire used for?
If the brake light wire is connected to a brake light source on the bike, the kit will turn complete red when the brake is pulled and then will turn back to your set color once the brake is released. It is meant to be an added safety feature.
@@ledglow oh makes sense! Thanks homie
What kit did you use, i'm looking for green and purple strobe, thanks
In the description.
@@ledglow I found it, thank you just seeing how to hook up only green and purple 🛸👽👽they look cleanest ones I've seen online or yt🏍🏍
I would not be happy with the led lights strip being able to see them on the outside of the body
Yep it's corny it must be hidden at all costs
What can be done to make the lights STAY where they are placed? Is there an adhesive that would be stronger than the application provided?
Clean the area thoroughly with alcohol and then use adhesion promoter.
How to get it delivered to India......???????
Please contact us directly.
@@ledglow contact details....????
@@gabbar6348 www.ledglow.com/
Make a video on car interior light
We have one! th-cam.com/video/nN6UmlSVlvs/w-d-xo.html
The best
How much candle power are your lights? Ohio state law says
Can I choose how many strips I want to use in the zones?
For example,....if I wanted 4 strips for zone 1 and 8 strips for zone 2 can I do that or if I wanted 2 strips for zone 1 and 10 strips for zone 2 can I do that?
Depending on which kit you purchase, you can place the strips where ever you want, however, the zones will always need to remain the same amount of strips.
Time to put in a toggle switch and run it off the ignition wire
Why don't you help the youtuber who installed your kit and cant get it to work properly?
Who are you referring to?
@@ledglow Edmonds Dantes
RanGer498 lmfao
Nop