@@DawidDoesTechStuff Hey man! Just notifying you from now, I just found your youtube channel and it is great! The only problem there is, you did a typo in your youtube channel and wrote "Dawid" instead of "David." Have a good day! Thank you for the content!
Im glad i got to watch this channel when it was small..I have a feeling your subs will reach a million in less than 2 years. You have an excellent presentation and production is top notch, Your personality is whats going to get you more subs... clear, concise and well spoken with an awesome sense of humor. The fact that you reach out to your subs in the comments is terrific, as your channel grows tho it will be sad when thats no longer possible. Keep up the great work Canuck!
@@DawidDoesTechStuff Dude I'm from Mexico, I had to pay nearly $1,300 US dollars for a Laptop Asus ROG Strix GL702VMK (in 2019) 128GB SSD + 1TB HDD, GTX 1060 3GB, FULL HD Display IPS at 75Hz, Intel i7 7700HQ, 16Gb of Ram in single channel... and you are complaining that your video card doesn't reach 144Hz, A first world problem just there hahahahaha. P.D. Love your videos man.
the question is do you have pets? once the shedding season hits fans and filters clog quickly. the optiplex PC we have sitting in the living room had a ton of hair in it after a month but the one in my bedroom where they never go is still clean.
Pretty neat idea, really like it. Thinking of doing something similar myself, I would like to go for a more minimal and decluttered look, also helps with cleaning the desk etc.
Great work,man!I mean for the people on the budget who dont need a 100 bucks rgb case for example and dust free too,perfect option!Keep up the good work.
@@DawidDoesTechStuff you dont use dremel with that sanding head to sand that much of a wood away, you should first use a repricating/jig saw to make the cut and only then use dremel sander for last half of milimeter.And for sanding you should use longer sanding head,should be as long as the thicknes of the drawer plus minimum 0,5 cm
Hey man! Just notifying you from now, I just found your youtube channel and it is great! The only problem there is, you did a typo in your youtube channel and wrote "Dawid" instead of "David." Have a good day! Thank you for the content!
Potentially dumb question, but wouldn't it make sense to put different components in different drawers, drilling holes in the bottom of each drawer to allow for cables to go between them? Theoretically, this would mean that less airflow is needed per drawer. You could put the power supply in the bottom drawer, the graphics card on top of it, and then the motherboard on top of that (using a PCIe extension cable of course). It would obviously require a lot of custom length cabling, but I think it might work better for the thermals
Are you from SA bro? Saw you wearing a Namibia jersey in an episode. Love the vids by the way, keep em coming, nothing better than a Dawid does tech stuff vid with my feet up, a castle in the one hand and some Billys in the other
Sheldon Simone - Dawid and I are from Namibia 😊 but then lived in Cape Town for a number of years. Some billy would go down nicely right now! Can’t find that in Vancouver. So cool that South Africans are watching his channel though!
you should use a metal plate and ground that power supply somehow. maybe taking and grounding the metal plate to the plug in the wall...but i was once told the psu needed grounded..and wood isnt grounding...
The psu is grounded if it's plugged in. However, some of the other components might not be. A metal plate, or aluminum foil, could help, it would ensure an extra path from the components to the psu/ground.
I know this video is 2 years old but thats freaking awesome bro 😂 your draw has better airflow then my pc case haha i have a zalman z3 plus... and yes it has a disk drive in it 😂
wells now that you have a dremel you can relocate your noctuas to the front of the drawer and add a rear exhaust, maybe add a bottom intake and place a container with ice in the lower drawer
Just inside the drawer, drill some drainage holes. I have the same drawer and if you spill a drink, it loves to fill thru that finger opening. Just a precaution to think about.
Easy to spot the new Dremel owner. They're the ones using a sanding drum on a cutting disk job. :P But seriously, if you're worried about the thermals, I'd cut two circular holes in the front of the drawer big enough for the fans to draw in air, paint the newly exposed wood- excuse me, particle board, cut out the middle of two large jar lids and cover them with window screen, put them in the holes like a speaker cover, then mount the fans to the inside of the drawer front.
Love the videos Dawid. You gotta be the funniest yet awesomest tech TH-camr on the platform. BUT, when using the dremel, please please PLEASE put on a mask, and possibly safety goggles that fit over your glasses. Safety first!
Hi, please could you do a video comparing the very cheapest pc cases available? I don't see the point, like many others, in spending a lot of money on a case when they have no affect on performance other than cooling. I'd like to know which is the easiest to build in, which has the best build quality and your opinion on which is best value overall.
open monitor solder the power buton cables directlly to monitor power button.so 1 button powers up system and the monitor...or get a keyboard that has power button
Hey, i really don’t know a lot about pc’s and i found a pc on this Dutch marketplace, it’s €750, should i buy it or not? Specs: Gigabyte GTX 1660 Super - i7 6700 - Corsair H100i V2 watercooler - MSI Gaming pro carbon AC Z270 moederbord - geen ram - 2TB 7200RPM seagate ST2000DM001 HDD - 250GB Samsung 850 EVO - 500GB Hitachi 5400 RPM HDD - Corsair CX650m 80+ Bronze voeding - NZXT H440 behuizing - 4 NZXT Fans 3x 120mm front 140mm back - Windows 10 pro
Nice job...run it on top of the desk with a board covering the top.I bet your airflow is front to back with just the handle slit for air intake which is too small. That’s why you have very little dust... mount a fan to bring air in from the gfx card side and blow it out over the power supply and you can get massive amounts of air without any vents in the back...use the card as a room divider to separate the airflow... good job overall
Could you just take a bottom of the drawer out then put a taller hate saying you would take two drawers what was the dollar heatsink it would be alot cooler the processor
@@DawidDoesTechStuff RuiLing 5-Pack 50cm PC Power Switch Cable Button ATX Desktop Computer Case Motherboard On/Off Reset Switch Line Re-starting Power SW Wire 2-Pin on Amazon those r awesome. Or any similar 5$
I have an Alex drawer already full of controllers and junk, instead of getting an ITX case I could just throw in an SFF build and call it a day. Now if I could at least throw in a 280mm radiator for water cooling that would be even better. Also as someone who works at IKEA Customer Support, this voids the guarantee so proceed with caution if you do try this
Next time you need to knock a piece of wood out like that- use a chisel and a mallet. Probably get both from the hardware store for less than $20. Make a few down-cuts along the area, then just knock them out with the chisel. Minimal mess, no fuss.
I have a question. I wanna buy an rx 580 8gb from sapphire the one with the 8+6 power connectors. Ive already got a 6+2 psu but thats all i have. However people are saying that it can run only on the 8 pin and it doesnt really need the extra 6. 1. Is this true? 2. Can i use the card as normal for gaming with just an 8 pin? Thanks for your time
Glad you revisited this. For turning on the pc you might want to have a look at this SilverStone Technology 2.4G Wireless Remote Computer Power/Reset ... www.amazon.ca/dp/B01MQUANS8/ref=cm_sw_r_sms_awdb_t1_zCTpEb7WCR7EA I use this for a htpc I have. It uses USB to power the board and has a cable running from the control board to the power button pins. Then you can power on and off or restart using the provided remote. Got it on sale for $24.99 cdn and would definitely recommend it.
Imagine someone just opens the draw to put something in it.
Boom. Gaming PC
They just better not open it too quickly. 😁
@@DawidDoesTechStuff then it'd be gaming pc *boom*
Dawid, if you keep this up people will want to play with your drawers!
I have already received a couple offers. 😂
O_O
Dawid - "so I reached out to EVGA to ask just how much power we could fit in a drawer!"
EVGA - "ummmm......"
Darn, I just called EVGA and they laughed.
Haha!! They are surprisingly understanding. 😂
@@siriax1691 Now I really want a cheese burger. 😁
@@DawidDoesTechStuff Hey man! Just notifying you from now, I just found your youtube channel and it is great! The only problem there is, you did a typo in your youtube channel and wrote "Dawid" instead of "David." Have a good day! Thank you for the content!
@@ggs1019 Lol, it's actually Dawid. I mean, it's intentional.
I had the same thought as you the first time I came on this channel too.
Im glad i got to watch this channel when it was small..I have a feeling your subs will reach a million in less than 2 years. You have an excellent presentation and production is top notch, Your personality is whats going to get you more subs... clear, concise and well spoken with an awesome sense of humor. The fact that you reach out to your subs in the comments is terrific, as your channel grows tho it will be sad when thats no longer possible. Keep up the great work Canuck!
Almost there...
Love the epic dremeling with brow sweat and the 20Loser60 vs the 2080 Superman! You have made Saturday mornings fun again for me sir TY.
love the alec steele style dremel bit
😁
6:25 0.1% lows 69 fps nice.
and now i also want the ikea drawer machine computer thing
Hahaha!! Nice.
@@DawidDoesTechStuff Dude I'm from Mexico, I had to pay nearly $1,300 US dollars for a Laptop Asus ROG Strix GL702VMK (in 2019) 128GB SSD + 1TB HDD, GTX 1060 3GB, FULL HD Display IPS at 75Hz, Intel i7 7700HQ, 16Gb of Ram in single channel... and you are complaining that your video card doesn't reach 144Hz, A first world problem just there hahahahaha. P.D. Love your videos man.
@@cdjtapipo280886 that’s because you got a laptop, they are much more expensive to make in a laptop, a PC with those specs would be MUCH cheaper.
Damn that dust is nothing, I had 3 times more dust in a month
I know right! I was expecting way more.
the question is do you have pets? once the shedding season hits fans and filters clog quickly. the optiplex PC we have sitting in the living room had a ton of hair in it after a month but the one in my bedroom where they never go is still clean.
I would add a support bar for the pcie bracket. I guess it doesn't really matter, but it would reduce stress on the slot a bit. It can't hurt.
Pretty neat idea, really like it. Thinking of doing something similar myself, I would like to go for a more minimal and decluttered look, also helps with cleaning the desk etc.
Great work,man!I mean for the people on the budget who dont need a 100 bucks rgb case for example and dust free too,perfect option!Keep up the good work.
Quality content
P.S. the temps are fine!
I am actually pleasantly surprised by them. 😁
I love ur videos keep it up
I thought he was going to take the dremel to the EVGA card, lol. I was like, oh lord that's his last loaner.
I'm gonna tell you right now, hang onto the warranty information for that dremel. I have owned 3 and they break so easily.
@J Fz I have no idea, never opened one up to see what was wrong. It just... never turned on again.
If you used them like David here in this video im not suprised...
@@Lipi19821 Yeah, please tell me what I did wrong?
@@DawidDoesTechStuff you dont use dremel with that sanding head to sand that much of a wood away, you should first use a repricating/jig saw to make the cut and only then use dremel sander for last half of milimeter.And for sanding you should use longer sanding head,should be as long as the thicknes of the drawer plus minimum 0,5 cm
@@Lipi19821 I don't think he did anything wrong. It's just slower. It's not uncommon to takes tons of material away with sanders in general.
Hey man! Just notifying you from now, I just found your youtube channel and it is great! The only problem there is, you did a typo in your youtube channel and wrote "Dawid" instead of "David." Have a good day! Thank you for the content!
Now your living big dude! Dremil tool ftw!
Potentially dumb question, but wouldn't it make sense to put different components in different drawers, drilling holes in the bottom of each drawer to allow for cables to go between them? Theoretically, this would mean that less airflow is needed per drawer. You could put the power supply in the bottom drawer, the graphics card on top of it, and then the motherboard on top of that (using a PCIe extension cable of course). It would obviously require a lot of custom length cabling, but I think it might work better for the thermals
Are you from SA bro? Saw you wearing a Namibia jersey in an episode. Love the vids by the way, keep em coming, nothing better than a Dawid does tech stuff vid with my feet up, a castle in the one hand and some Billys in the other
Sheldon Simone - Dawid and I are from Namibia 😊 but then lived in Cape Town for a number of years. Some billy would go down nicely right now! Can’t find that in Vancouver. So cool that South Africans are watching his channel though!
Great tech stuff as usual
you should use a metal plate and ground that power supply somehow. maybe taking and grounding the metal plate to the plug in the wall...but i was once told the psu needed grounded..and wood isnt grounding...
The psu is grounded if it's plugged in. However, some of the other components might not be. A metal plate, or aluminum foil, could help, it would ensure an extra path from the components to the psu/ground.
I know this video is 2 years old but thats freaking awesome bro 😂 your draw has better airflow then my pc case haha i have a zalman z3 plus... and yes it has a disk drive in it 😂
that gpu looks amazing! evga did make some great looking cards
Just noticed your beard grew back, thank god.
wells now that you have a dremel you can relocate your noctuas to the front of the drawer and add a rear exhaust, maybe add a bottom intake and place a container with ice in the lower drawer
That's one really nice IKEA drawer PC system computer machine rig gaming furniture
Just inside the drawer, drill some drainage holes. I have the same drawer and if you spill a drink, it loves to fill thru that finger opening. Just a precaution to think about.
What if you open the drawer a little bit while gaming? Wouldn't it make better airflow and possibly better thermals?
I had a evga 2070 super xc ultra and I hated the fans clicking on and off noise at idle and the coil whine screech
EVGA is my favorite Nvidia partner. They have the best looking cards in my opinion. Can't wait till they just give you the cards.
I don't like the 20xx cards, i owned a 1080ti ftw3, imo a beautiful card, i don't like the newer shroud very much. I love EVGA anyway.
THE DRAMA of that unboxing sequence is just so dope 😂
"Why????"
"Because, why not?"
Those vibrating cutters work a LOT better than a Dremel for stuff like this. And they don't blow dust everywhere. And they're not dangerous at all.
Easy to spot the new Dremel owner. They're the ones using a sanding drum on a cutting disk job. :P
But seriously, if you're worried about the thermals, I'd cut two circular holes in the front of the drawer big enough for the fans to draw in air, paint the newly exposed wood- excuse me, particle board, cut out the middle of two large jar lids and cover them with window screen, put them in the holes like a speaker cover, then mount the fans to the inside of the drawer front.
Love the videos Dawid. You gotta be the funniest yet awesomest tech TH-camr on the platform. BUT, when using the dremel, please please PLEASE put on a mask, and possibly safety goggles that fit over your glasses. Safety first!
are the noctua fans at all strapped onto the drawer ? or are they lose flying around basicly ?
Put 2 fans as exhaust and you will improve your temps, to power on the PC you can use Wake on Lan to power on the PC from your phone.
you should run a button to the top of the desk from behind or drill a circle int he draw and put a button in it to turn PC on.
Hi, please could you do a video comparing the very cheapest pc cases available? I don't see the point, like many others, in spending a lot of money on a case when they have no affect on performance other than cooling. I'd like to know which is the easiest to build in, which has the best build quality and your opinion on which is best value overall.
You should underclock the gt710 until it doesn't output a video
I love the evga design its so epic. Getting a evga card next time. Got a asus strix 2080ti for now
Nice, thanks for the update! Still wonder what would happen if you swapped the back of the drawer for some kind of custom metal frame
open monitor solder the power buton cables directlly to monitor power button.so 1 button powers up system and the monitor...or get a keyboard that has power button
Something my dad did with a home theater pc was wire a door bell button to the motherboard to power the system on.
Hair rocking the crunchie bar look
I have the exact same drawer with two gaming PC's next to it, maybe its time to spare some space and put them in the drawers ;D
Hey, i really don’t know a lot about pc’s and i found a pc on this Dutch marketplace, it’s €750, should i buy it or not? Specs: Gigabyte GTX 1660 Super
- i7 6700
- Corsair H100i V2 watercooler
- MSI Gaming pro carbon AC Z270 moederbord
- geen ram
- 2TB 7200RPM seagate ST2000DM001 HDD
- 250GB Samsung 850 EVO
- 500GB Hitachi 5400 RPM HDD
- Corsair CX650m 80+ Bronze voeding
- NZXT H440 behuizing
- 4 NZXT Fans 3x 120mm front 140mm back
- Windows 10 pro
Nice job...run it on top of the desk with a board covering the top.I bet your airflow is front to back with just the handle slit for air intake which is too small. That’s why you have very little dust... mount a fan to bring air in from the gfx card side and blow it out over the power supply and you can get massive amounts of air without any vents in the back...use the card as a room divider to separate the airflow... good job overall
You should get a wireless power button to make things easier lol
Could you just take a bottom of the drawer out then put a taller hate saying you would take two drawers what was the dollar heatsink it would be alot cooler the processor
So cool, I'm sat here struggling to get 30fps and higher end games. One day ill get a nice rig.
Finaly you got a big boy card
It is all very exciting. 😁
@@DawidDoesTechStuff RuiLing 5-Pack 50cm PC Power Switch Cable Button ATX Desktop Computer Case Motherboard On/Off Reset Switch Line Re-starting Power SW Wire 2-Pin on Amazon those r awesome. Or any similar 5$
you had a bit too much fun with the dremel bit :P
This is really cool bro!
id totally put a few front input ports on the drawer :)
Silverstone makes a nice little power reset wireless switch that looks like a car dongle. Would work well for that.
Any vibration from fans can be felt on desk surface ?
6:18 i feel offended because i actually have a rtx 2060 :( 😂
Oh yeah my 2060 is running is 2050 mhz on core and my memory overclocked to 1200mhz
😃
*Sees RTX 2080*
*Cries in RX 590*
After watching this I'm looking at the Alex drawers next to me wondering if I should do it...
good video im planning on doing one like yours
how loud did the pc get with the 2080 super oc? can you even hear it?
i am still wondering if you can find a pc in a keyboard
@J Fz nice
you should use an AIO for cooling the cpu
A junior hacksaw would have been maybe 5% of the cost of the Dremel and 100% more effective. Although approximately 75% less fun.
I have an Alex drawer already full of controllers and junk, instead of getting an ITX case I could just throw in an SFF build and call it a day. Now if I could at least throw in a 280mm radiator for water cooling that would be even better.
Also as someone who works at IKEA Customer Support, this voids the guarantee so proceed with caution if you do try this
still waiting for that vega 56 video
Oh no, the horror which has been foretold has come to pass, Dawid has power tools now! 😲
Next time you need to knock a piece of wood out like that- use a chisel and a mallet. Probably get both from the hardware store for less than $20. Make a few down-cuts along the area, then just knock them out with the chisel. Minimal mess, no fuss.
I have a question.
I wanna buy an rx 580 8gb from sapphire the one with the 8+6 power connectors. Ive already got a 6+2 psu but thats all i have. However people are saying that it can run only on the 8 pin and it doesnt really need the extra 6.
1. Is this true?
2. Can i use the card as normal for gaming with just an 8 pin?
Thanks for your time
This is very helpful because I'm building a pretty low buget pc and this might be a good starting ground
It’s really cool but id be worried about it being a fire hazard. Maybe im paranoid but id never do this for that reason.
Oh my god I need to do this.
calling an IKEA drawer a "small form factor case" with a straight face takes a lot
Class vid.
Build a pc in a waifu body pillow with the waifu gpu
That's one way to get a hot Waifu in the sac...
@@Kelekona_808 Oh lord.... I love that.
how do u get evga in SA
u gotta make a video discussing i5 8600k and i5 9600k scandal
@J Fz same fucking processor
@@Imran-yr6qh lol seriously? Damn Intel sucks.
Next question: How much gaming power can you fit beneath a top hat while wearing it.
dremel. the tool that everyone agrees is the wrong tool for every job, yet somehow manages to actually do every job fairly well.
at 8:15 you are using Radeon ReLive.. W
Buy a two pin atx power supply switch on amazon for like 3 bucks.
man got a free 2080, theres nothing more to the vid
It’s funny because I thought of this then I found out that you did this
Mmmmm!! Awesome video 🥳
Can i have the rtx 20losser60 ?
new marketing for ikea lol
The thing I would be scared about is it's possible that it can get flammable
Also ... thitty seven undred 😜
my mind went like, "When did AMD release an RX3700x?"
then i remembered that it was a CPU.
Should have put an Rx 580 in there.. and call it a pie warmer
If this system fails, will there be a sequel to "Who Killed Captain Alex" aptly named "Who Killed Captain Alex: Western Tech Drawer's Fall"?
Why not use a CRT monitor? Better visual quality no blur and no need for 100 FPS. 👍
The best case I've ever seen in my life
Shouldve used the waifu card. Wait actually nevermind. You wouldnt be able to see it. Seeing the waifu is the source of power for the waifu card.
Turn all of your drawers in to a pc beast 😂 or multiple pc's like a 4 drawer pc setup 😆
10:46 Skip the ad
Can I have the drawer pc so I can put it in my drawer?
Glad you revisited this. For turning on the pc you might want to have a look at this SilverStone Technology 2.4G Wireless Remote Computer Power/Reset ... www.amazon.ca/dp/B01MQUANS8/ref=cm_sw_r_sms_awdb_t1_zCTpEb7WCR7EA I use this for a htpc I have. It uses USB to power the board and has a cable running from the control board to the power button pins. Then you can power on and off or restart using the provided remote. Got it on sale for $24.99 cdn and would definitely recommend it.