Thought to pack the boot with grease using a grease squeezer made from small bicycle tire pump after loosening the c clamps holding boots, seems if it was done and worked would save very much trouble..?
noise on the CV joint is generally caused because the power of grease is no longer effective. So that the impact of the iron ball on his house will be felt as a noisy noise. Simply replace it with a special CV joint grease in the original packaging.
Sir, my car CV axle has a play and make sounds on both sides of the front car. I hold the CV axle firmly, pushing in and out. During this time, the axle makes a play movement about 1 cm with a bit of click sounds. There are no leaks or signs of worn in the bushings or rubber parts. Is this normal? And any danger in driving with this axle play? Would be please to hear a good solution Thanks
the clicking sound when you rotate it a little is a sign that the iron ball collides with his house without any noise between the two. Then you can simply replace it with new grease in the same way as my video. Outdated grease will be more liquid, so it cannot reduce the impact of the component in the CV joint.
Thought to pack the boot with grease using a grease squeezer made from small bicycle tire pump after loosening the c clamps holding boots, seems if it was done and worked would save very much trouble..?
noise on the CV joint is generally caused because the power of grease is no longer effective. So that the impact of the iron ball on his house will be felt as a noisy noise. Simply replace it with a special CV joint grease in the original packaging.
Bongkar sendiri apa lewat mekanik om
Lepasin CV jointnya gmn om?
Very fast vedio ,,,why not slowling
I am not understand why u upload such a vedio to waste our time and ur time
I gave you a thumbs up very thorough in how to go about greasing cv joints my only issues is the music was some what distracting.
thanks for the advice, I will change later
Makasih ilmunya
sama2 mas
this is a good video, what are the brand of the cv boots you used?
thnx U , I use the brand Seiken , please visit www.seiken.com/english/parts/shaft.htm :-)
Sir, my car CV axle has a play and make sounds on both sides of the front car.
I hold the CV axle firmly, pushing in and out. During this time, the axle makes a play movement about 1 cm with a bit of click sounds. There are no leaks or signs of worn in the bushings or rubber parts.
Is this normal? And any danger in driving with this axle play? Would be please to hear a good solution
Thanks
the clicking sound when you rotate it a little is a sign that the iron ball collides with his house without any noise between the two. Then you can simply replace it with new grease in the same way as my video. Outdated grease will be more liquid, so it cannot reduce the impact of the component in the CV joint.
can CV joint that is making noise , can I shoot some oil instead of taking down and put grease
you can clean all the grease by spraying degreaser, then rinse with clean water, then dry, and fill with new grease
kayak buat srikaya untuk roti ya wkwk
hahaha...
Yang recomended merk apa om antara lks mtk ama sp3g
Lks cukup layak..tapi paling bagus ya yg ori SGP..but its expensive...
salam restorasi,, pelumas grees apa di pakai. ?
saya pakai Seiken