Where the silver cable plug into the optical flow module on the bottom, which faces up? Its a flat ribbon, one side is shiney black, the other is shiney gold. They are held in with a little black clip.
Out of the 2 sets of video Cables coming out of the front PCB, which on is the camera ( white or red connector ) ? I would like to try to feed the camera picture to a 5.8Ghz VTX instead of the factory one.
Very informative. video. Maybe u can help me before I decide to open it up.. The signal meter on my SG906 controller goes down to nothing after say 6-7 metres. I can control the drone to 300+m no problem , but I cannot get Altitude or Distance readings back, beyond a few metres. They just freeze to say 5 or 6 . I have never flown this PFV since I do not have a 5G WIFI smartphone, but the signal on the controller should not be lost so soon, right ? I'm hesitant to buy a 5G smartphone cause I think it would be for nothing , if the drone cannot send back info far enough. Did u ever encounter something like this ?
Pa-guide po sana sa pag reconnect ng 2 wires sa gimbal circuit board at 2 wires din sa sd card circuit board. Hindi ko na po maibalik ang tamang connections. Tinanggal ko po kasi dahil may parts na nabasa. Salamat po!
Very informative for drone lovers
Worth sharing bossing
Very nice info its great
Amazing thanks for sharing
Where the silver cable plug into the optical flow module on the bottom, which faces up? Its a flat ribbon, one side is shiney black, the other is shiney gold. They are held in with a little black clip.
Thanks for your share this help a lot.
Buenas, se salió de los anclajes la cámara del pro2,; como se arregla, gracias.
Nice video bro
Do you think is possible upgrade the camera PCB for a better camera with 30fps?
Do you have a video that shows how to remove the motor from the arm?
th-cam.com/video/U1w_p2ZtY1E/w-d-xo.html
@@martinshaughnessy3622 not available video
Can you show how to remove motor from one of the front arms Please?
how do you teardown the cover? just pull?
Out of the 2 sets of video Cables coming out of the front PCB, which on is the camera ( white or red connector ) ? I would like to try to feed the camera picture to a 5.8Ghz VTX instead of the factory one.
after a fall the right propeller does not work, I have no image and a continuous sound is heard. You can help?
Thank you so much!
where can one get a wifi card for sg906???????????????
Very informative. video. Maybe u can help me before I decide to open it up.. The signal meter on my SG906 controller goes down to nothing after say 6-7 metres. I can control the drone to 300+m no problem , but I cannot get Altitude or Distance readings back, beyond a few metres. They just freeze to say 5 or 6 . I have never flown this PFV since I do not have a 5G WIFI smartphone, but the signal on the controller should not be lost so soon, right ? I'm hesitant to buy a 5G smartphone cause I think it would be for nothing , if the drone cannot send back info far enough. Did u ever encounter something like this ?
Salamat dito lods.. Anong klasing spray paint ang dapat gamitin para sa top cover? Balak ko kc sprayhan kc puro gasgas na
Sir nag aayus kaba ng SG906 PRO 2
My Sg906 fix the position more than 10 minutes. Any idea what to do with it??
Sir pano i replace ang motors?
Sir gud evening pwedi pong mg tanong.saan po pwedi mg pagawa ng drone.n aura kasi arms nya rear arm A ayaw umikot SG 906~MAX
Tg pila tg pila n boss hehe
Saan ka po ba bumili
shoppe/lazada merun sir..
Hi...nagcrash yung sg 906 pro 2 ko kaya lang natanggal yung rubber damper na humahawak sa magkabilang gimbal...pano ko sya maibabalik...tnx
I think I broke my gimble when I crashed. Is there a way to fix it.
Feeeww. Took the whole thing apart. Made sure all the wires were free. Idk if that did it but I think I fixed it.
@@masterstoopid3926 same thing happened to mine, stripped it all down and couldn't find anything broke, put it back together and it worked fine.
@@robertcoleman1591 I think that a little dust will mess it up.. I had the same thing happen but have not taken it apart yet...
Q idioma habla? Subtitulos pz.
yun akin lods yun front left motor nya parang medyo loose pano ayusin yun
Sir, paano ba mag firmware update sa SG906 Pro 2?
boss pede po pa modified ng remote ng sg906 pro? ano fb nyo?
Pa-guide po sana sa pag reconnect ng 2 wires sa gimbal circuit board at 2 wires din sa sd card circuit board. Hindi ko na po maibalik ang tamang connections. Tinanggal ko po kasi dahil may parts na nabasa. Salamat po!
I cant understand what you are saying, only speak english