ALL NEW VERMEER MC3700 CENTER PIVOT MOWER CONDITIONER

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ธ.ค. 2024

ความคิดเห็น • 73

  • @adamnewsome2914
    @adamnewsome2914 4 ปีที่แล้ว +1

    Always enjoy the videos

  • @louisnemick1939
    @louisnemick1939 4 ปีที่แล้ว +2

    Nice looking machine.

  • @scottsargent8564
    @scottsargent8564 4 ปีที่แล้ว +1

    Best of luck with the new mower

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      Thank you.

  • @williambrewer6346
    @williambrewer6346 4 ปีที่แล้ว +1

    You just can't beat Vermeer.
    Happy Harvesting

  • @scottsargent8564
    @scottsargent8564 4 ปีที่แล้ว +1

    Best of luck with the new disc mower

  • @markcornell986
    @markcornell986 4 ปีที่แล้ว +1

    Thanks brain.i never run a center pivot my good friend run two new Holland's on a dairy farm.loves them..

  • @Effay513
    @Effay513 4 ปีที่แล้ว +1

    Looks like a great piece of equipment! Nice to have dealership that takes care of you.

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      It really is and i can drive the tractors there its so close.

    • @johnblue8029
      @johnblue8029 2 ปีที่แล้ว

      Vermeer is good but they can be a pain in the ass at times. I’m in Florida . I do like there equipment it’s a good brand

  • @michaelsailors7794
    @michaelsailors7794 4 ปีที่แล้ว +1

    That's a great looking mower!!! Hope to have one of those one day. Take care and see you next time

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      With the finance options Vermeer had i was well worth it.

  • @GerraldFarms
    @GerraldFarms 4 ปีที่แล้ว +1

    Nice looking mower. I’ve got to run it. Never run a center pivot. Have a good one buddy

  • @stevemac5117
    @stevemac5117 4 ปีที่แล้ว +1

    Great video Brian. That sure is a nice looking mower. Nice to see how a center pivot works. Thanks for sharing.

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว +1

      I really like it. I hope it lasts years and is a good investment.

  • @LVFFarmVlogs
    @LVFFarmVlogs 4 ปีที่แล้ว +2

    i know a few guys up here who run those mowers and they love them

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      Northern Wisconsin farming so far i am a happy owner. Now if I could just get some weather to use it

  • @RandWFarmstead-TonyWalsh
    @RandWFarmstead-TonyWalsh 4 ปีที่แล้ว +1

    Dang that thing looks huge, hope it works out for you my friend. Take care and have a blessed week.

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      It is huge lol i was nervous getting it but no regret now.

  • @mountainviewturning5319
    @mountainviewturning5319 4 ปีที่แล้ว +1

    Great video nice mower

  • @randyharris30
    @randyharris30 4 ปีที่แล้ว +1

    You just answered the question. You still have to rake, just easier, more uniform rows.

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      In really thick hay you can get by with just flipping the hay over. Unfortunately this year we can hardly get any dry weather and have had to tedder everything 2 times to get it dry before the next rain.

  • @ocs_gleaner
    @ocs_gleaner 4 ปีที่แล้ว +1

    Nice. Would love to own a center pivot. Good Luck with it.

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      I was really nervous at first, thinking it would be way to big on a lot of my little fields.

  • @gordonbright7106
    @gordonbright7106 4 ปีที่แล้ว +1

    Real nice conditioner made cutting that ditch bank hay a breeze lol. Should speed up haying if the weather would just cooperate

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      Man thats some of the finest ditch hay you ever ate, fertilized with oil, gas, diesel, and all the trash and best beer can juice and dip spit In South Carolina. We get like $300 a roll for that quality hay. Lol see ya later bud

  • @markcornell986
    @markcornell986 4 ปีที่แล้ว +1

    Brain ,I bet you are good with it know..nice..never seen one around here..tks....

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      Mark Cornell if that Massy didn’t have the finger controlled remotes it would probably be a lot more of a pain i think. Especially on my little chopped up fields.

  • @dehavenfamilyfarm
    @dehavenfamilyfarm 4 ปีที่แล้ว +1

    Congrats Brian! I would like to try a center pivot- seems like it would be a lot faster.

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      DeHaven Family Farm it really is much faster now that i know how to operate it better.

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      Thank you 🙏

  • @AJmx2702001
    @AJmx2702001 4 ปีที่แล้ว +1

    I have had my fill on changing blades on the deeres and the kuhns so let me know how those blades last and how the change over is long term since most of my help cant take time to put blades on right side up so they trash about 100 blades in 3 months . Next year all the hay cut will be one field of 120 acres and another of 40 lol no more subdivision patches with peoples garbage laying in them

  • @AgWildNebraska
    @AgWildNebraska 4 ปีที่แล้ว +1

    That's sure is a nice mower. Previously you ran a disc mower with no conditioner right? We've had good luck with our Vermeer mowers and the dealer.

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      Correct we still have it and have mowed side by each. I honestly cant tell a whole lot of difference on dry time this year anyway lol. We are so wet it’s unreal.

  • @LorisCrochetCorner
    @LorisCrochetCorner 4 ปีที่แล้ว +1

    Hi I stopped by from Farmall's to visit you're channel. I hit all the buttons and bell I hope you do too Tyfs ❤ I'm Looking forward to seeing more videos!! Have a wonderful day much love to you 🥰

  • @farmingforfunandprofit940
    @farmingforfunandprofit940 4 ปีที่แล้ว +1

    Nice looking Mower..........You say it uses Shear Hubs...... Do they look anything like Those on Hew Holland? Our Krones use shearable Roll Pins.... Haven't had to replace any yet...

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      Farming for Fun & Profit its a little gear looking thing. So far so good but if one does ever go it a really simple fix.

  • @farming4g
    @farming4g 4 ปีที่แล้ว +1

    That broken bolt could have been overtorqued or even from a bad batch... they might end up replacing all those bolts up front. Had a SuperM baler and the bolts that hold the bands around on the picker were shearing off. Even though baler was out of warranty, they sent up all new bolts since they had reports from other operators having the same issues.

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      You are probably right especially with the forgotten locktite on the hubs the same guy probably didn’t toque the bolts right

  • @donaldcralton34
    @donaldcralton34 4 ปีที่แล้ว +1

    looks like a nice machine, hope it works out for ya and adds to the bottom line bud.

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      Donald Cralton I second that sir couldn’t say it any better.

  • @johnnybarbar7435
    @johnnybarbar7435 2 ปีที่แล้ว

    Brian, now that you have ran this a couple seasons, how do the shear hubs perform on keeping the adjacent hubs from crashing? Also, did Vermeer give you plenty of pivot range to allow you to straddle the previous windrow and not smash it down?

  • @Hobocreekfarm
    @Hobocreekfarm 4 ปีที่แล้ว +1

    Good looking mower. Have you ever seen another alligator in those ponds across the street?

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      No never knew there was one.

    • @Hobocreekfarm
      @Hobocreekfarm 4 ปีที่แล้ว +1

      SLC Farms one got run over in the road just behind those ponds about two or three years ago.

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว +1

      Daniel Ramsey never knew that.

  • @southerndirt9589
    @southerndirt9589 4 ปีที่แล้ว +1

    That's one good-looking more I want a tm1210 Vermeer it just hard to convince myself to buy it my 2nd year in

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      southerndirt 95 well had i known this would be the year from hell and we would get rain every freaking day I probably wouldn’t have got it this year and waited till next spring

  • @randyharris30
    @randyharris30 4 ปีที่แล้ว +1

    So you dont have to rake with this cutter?

  • @Murphyslawfarm
    @Murphyslawfarm 4 ปีที่แล้ว +1

    G'day SLC

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว +1

      Howdy Murphy. Hows things down under?

    • @Murphyslawfarm
      @Murphyslawfarm 4 ปีที่แล้ว

      @@SLCFarms Nice and hot 👍

  • @lakesideranch
    @lakesideranch 4 ปีที่แล้ว +1

    Nice piece of equipment Brian! Great video as usual, wish you many trouble-free hours with your new rig. Work safe my friend.
    Doug@ the "ranch"

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      Thanks Doug. Hope you are doing well sir? I sure hope it last years for what it cost.

  • @GosselinFarmsEdGosselin
    @GosselinFarmsEdGosselin 4 ปีที่แล้ว +1

    Nice looking machine!!
    I'd take it, except it's got rubber...
    Impeller and I'd take it 👍
    I'm sure it will be a great machine for many years to come!!

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      Gosselin Farms Ed Gosselin is steel rollers better? Or tines. I almost got tines for our grass hay but like I said in the video 4k cheaper for the rubber roller. Also going from no conditioner to having one i can tell a difference in the way the hay looks and drys baled

    • @GosselinFarmsEdGosselin
      @GosselinFarmsEdGosselin 4 ปีที่แล้ว +1

      @@SLCFarms I got spoiled with the impeller.. going back to rubber was a mistake.
      NH has impeller too, but they are like Combs, just look cheap to me. I like the JD impeller, the older challengers were the same. I don't know what they use now.
      Going from nothing to rolls, you will like it!!
      I've been told that steel rolls are great too, but I've never been around any.

  • @markcornell986
    @markcornell986 4 ปีที่แล้ว +1

    How wide are the rubber rolls.here in Michigan alalafa wouldn't get crushed good .and have to tedder it out to get it dry....

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      Mark Cornell 9’ I believe. You can adjust the swath width and openings pretty good.

  • @dc102dc102
    @dc102dc102 4 ปีที่แล้ว +1

    Hey man , I was wondering what it coast to get your round bales made into squares

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว

      About a dollar a bale

    • @dc102dc102
      @dc102dc102 4 ปีที่แล้ว

      @@SLCFarms why would you want to build your own unrolling house to save a dollar a bale.

    • @nalley6815
      @nalley6815 ปีที่แล้ว

      @@dc102dc102 $1 adds up real fast

  • @markcornell986
    @markcornell986 4 ปีที่แล้ว +1

    Second cut grass ..?

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว +1

      That was first that should had been cut a month before that. It was June 2. We have had such horrible weather I haven’t even started second cut and should be starting 3rd or even 4th cut. We cant get a dry week. I finally finished all my first cutting July 28th

  • @tysonbanks2064
    @tysonbanks2064 7 หลายเดือนก่อน

    How fast are going in that tractor

    • @SLCFarms
      @SLCFarms  7 หลายเดือนก่อน

      It will do 27 I mow about 6-7 mph

  • @davidkleyn6120
    @davidkleyn6120 8 หลายเดือนก่อน

    Why is this machine not being produced by Vermeer at this time? 2024

    • @SLCFarms
      @SLCFarms  8 หลายเดือนก่อน

      Probably because they were junk. They bought this unit back from me

  • @GosselinFarmsEdGosselin
    @GosselinFarmsEdGosselin 4 ปีที่แล้ว +1

    You gotta take it back??? Service department should send someone out to the field.. warranty!!!!

    • @SLCFarms
      @SLCFarms  4 ปีที่แล้ว +1

      Gosselin Farms Ed Gosselin in my area dealers don’t have service trucks. 🤬 is all i have to say about that (in Forest Gump Voice)

    • @GosselinFarmsEdGosselin
      @GosselinFarmsEdGosselin 4 ปีที่แล้ว

      @@SLCFarms 😵😲🤬🤬🤬
      Ours had old pickups and a hand full of tools.. until the late '80s.. we always had a better service truck than they did until the early 2000... Lol.. hard to fix things like balers without being in the field..

  • @scottsargent8564
    @scottsargent8564 4 ปีที่แล้ว +1

    Best of luck with the new mower