Thank you for watching, I appreciate it. Please hit the thumbs up 👍 if you enjoyed the video! paypal.me/scrapitall200?country.x=US&locale.x=en_US Thanks again!
Some people will say $1.00 extra isn't worth the time. But as a hobby scrapper and collecting material for long periods of time, at the end of the day time doesn't matter. Quality and informative video, well done sir!
I scrap part time, I'm a microscrapper, not a macroscrapper . If I average $8-10/hr while I'm at home, great. I'm not spending my time driving my truck and gas driving around, I'm home with tbe fam, spend 15 minutes on teardown, then see them. Make $50 extra n not use my time and vehicle and maintenance otherwise
Agreed sirs. I do all my scrapping as a hobby that pays me… i do lots on my coffee breaks or lunch breaks at work in the shop. I do lots of my collecting at work as well. Im a maintenance repair person for a rental management company. We own and manage over 2500 individual dwellings, some houses, duplexes, attached townhouses or apartments and I care for the entire north side which amounts to approximately 500 units. Its a fun hobby to have cuz you never know what you’re going to find or when… sometimes its from repair work or sometimes you just get lucky and find stuff
The total breakdown of each armature was verry calculated and perfect, including the 3 differences in scrap value prices witch I really appreciate you taking your time to show us fellow scrappers,scrap happy buddy 👍
I'm just starting to recycle scrap here in Germany as a hobby and part-time job. These videos help a beginner like me tremendously! Thank you. I look forward to further informative articles with tips and tricks on the subject of scrap processing and scrap trading.😊 
Really great guides, thanks for sharing these quality techniques! It’s good to have a few different ways to do these things, sometimes one works when another doesn’t 👍
One more metric you could possibly add is a scrap per hour of item. For example, there might be three different times for the different size motors. take your fastest time in seconds for clamping cutting and punching/cleaning. Then how many you could fit into an hour by that method. It would tell people which items are the priority highest per hour items to do first in a time pinch and can do the lower per hour items later or sell them as is. I thank God for your encouraging and educational videos.
I'm so grateful to you! I have a whole box full in the basement and never really knew how to work with them, the machete and vise method works great for me, just tried it out right after watching the video, you're the best, thank you!
I have scrapped a few of these, and some were easy, others wasted too much time and energy! So I have a bin full of these figuring maybe one day I'll find a better way, or scrap will be so high it'll be worth my time, but now I have hope that it's not a waste of my time. My yard only gives shred price for these so I've been saving them up. Love the video and your breakdown, really appreciate it buddy, God bless
@@paulburrows2120 I hope they’ll be easier to scrap, especially since your yard only pays shred price for them, that surprises me! Thank you so much and God bless you and all of your loved ones!
I always throw them into my shred because i can’t never get the copper out of them. Now if I ever run into another one I will give a try thanks for showing how to do it! Great video my friend!
thank you for this video it gave me a lot of information .I'm just a hobby scrapper and do scrapping to keep myself busy after retirement so I watch your videos all the time and enjoy them very much
Of course I liked your content. I'm always learning something new when watching your videos. Right off the bat I found out that TH-cam unsubscribed me from your channel; something that has been happening alot. Not your problem. Thx for the prayers at the end!
Hey SIA! Thanks for this tutorial. once i have set up my workshop, ill pull back this armatures out of the "little motors bin" i have and try to seperate them! 👍 have a great time till the next video!
I've only tried the last method and then just started stockpiling because it didn't seem worth doing one at a time. I might just keep holding onto them for when I have a press and do the first method. It will save my shoulders for sure. Nice to see so many ways to do it.
When I am Curbside Scavenging and find items to recycle, I disassemble the item completely. From the brass in the plugs to the screws holding the item together. The plastic pieces is the only discarded. ♻️💲♻️💲♻️💲♻️
Thank you for an awesome break down of the ways that you have found that work for you. I have buckets of these to do and now I will try your methods. Please keep up the amazing work that you do.
Nice and informative video, the time it took to gain a dollar, either hobby or side income is always a plus. Thanks for providing this information. Stay safe and may God's blessings surround you and your family. See you on the next video.
Great video! Wish I saw this before. Just took in about 3 brute buckets of these from treadmill motors that was saved up, because they looked difficult to deal with...
Yes you do make it look like cake lol. But you are the only scrapping channel i have found that can actually give clear and easy to understand directions as you go. You must be a teacher lol but thank you keep them coming i learn so much! And the rain is am awesome bonus. I live in the 🏜️ so enough said lol
Another great video I been scrapping since I was a kid I usually just cut the ring around the brush fingers then place them in a wood fire then tap the shaft on a block copper falls out of the bottom then do the copper fingers on top copper is cleaned no coating and the steel here is #2 prepared thanks for the prayer at the end of the video our father God and our lord Jesus is awesome
Thank you! I prefer not to burn that stuff, just my personal preference but I get it with well. Amen to that. God bless you abd thank you for watching.
New to scrapping here. Broke up my first vacuum this weekend, a Kirby 100th edition. All copper fortunately. Once I get a stack of armatures I will try your techniques. Thanks!
I can't tell you how many of these I've scrapped as electric motors because I couldn't figure out a good way to do it. Of all the scrapping tip videos Ive watched this might be the best one I've seen. This and the one where you used the machete to split the electric motor. I don't know if I have a machete but I'm sure going to look around to see if I can find something that will do the trick. Great videos and excellent tips keep up the good work. I don't subscribe to many channels but I will to yours.
Thank you so much for that, I really appreciate it! A meat cleaver works as well if you can’t find a decent machete, although they don’t handle the abuse as well as a machete. Thanks again!
The cylinder you pealed the individual stripes of copper off is called the, commutator. Thanks for demonstrating how to remove the copper from those difficult armatures coated shellac.
Awesome brother! I knew they were called commutator because I’ve heard you call them that multiple times but my brain went blank making the video 🤣 Thank you for watching.
Good tips. All a matter of wehat you value your time at, of course. I used to leave the copper bits that you peeled off the shaft...if I was still scrapping lots of motors I'd use that tip. Generally, the heavily varnished ones I scrapped as they were.
Thanks for some new ideas, I tend to scrap the, too, some of the price is offset by electricity and using up some of your cutoff blade. I still think its better to separate.
i always threw these out, thank you Scrapitall. I have a tip 4 U, on your angle grinder, screw the handle on the opposite side, fix the cover guard upward and your sparks will fly away from you but you probably already no this. Godbless.
Very happy my video has helped. That’s a good tip and I appreciate it. I actually wanted them to go where they did because I’m using a shelter logic tent as my shop and I didn’t want any sparks or hot copper dust to hit the tent. Normally I do all my cutting at my outside workbench but it just wouldn’t stop raining lol. I do appreciate the useful tip. Thank you for watching and God bless you!
Absolutely! My older pair is a Doyle brand from harbor freight, they have a lifetime warranty which is nice. They cost around $10 a few years ago. Probably double the price now lol. But they’ve been really good! But I’ll never misuse the Knipex, especially since they were a gift.
Bonjour de France, Alsace, merci beaucoup avant je coupait a la meuleuse les rotor et sa me plaît pas car les Perte en poussière sont conséquent, je ferai les prochains selon Votre méthode avec pince et hache , grand Merci Mr 👍
@@aaronedmunds4829 you definitely could. I never even thought of using that in this video. I personally don’t like the sawzall (too much vibration) but it will definitely cut down on the dust. Thank you very much, I appreciate you watching
Thank you for watching, I appreciate it.
Please hit the thumbs up 👍 if you enjoyed the video!
paypal.me/scrapitall200?country.x=US&locale.x=en_US
Thanks again!
Excellent video. Clear instruction, clean shop, sound and editing on the mark. Best I've seen on this subject.
@@gaildeckant267 wow, thank you so much for your wonderful comment, I really appreciate that!
Don’t set your grinder down untill the blade stops!
You should make a video on how to find scrap and how to advertise for picking up scrap metal for us newbies like me.
@ great idea, thank you for the suggestion. I will see if I can come up with something
I've been hoarding armatures for years trying to figure out efficient way of removing copper, so I thank you for this video.
You’re welcome, I hope this video helped you.
Thank you for watching.
Its called "Get a half way decent job."
Some people will say $1.00 extra isn't worth the time. But as a hobby scrapper and collecting material for long periods of time, at the end of the day time doesn't matter. Quality and informative video, well done sir!
I absolutely agree with you!
Thank you for watching.
Yep I agree!
Facts
I scrap part time, I'm a microscrapper, not a macroscrapper . If I average $8-10/hr while I'm at home, great. I'm not spending my time driving my truck and gas driving around, I'm home with tbe fam, spend 15 minutes on teardown, then see them. Make $50 extra n not use my time and vehicle and maintenance otherwise
Agreed sirs. I do all my scrapping as a hobby that pays me… i do lots on my coffee breaks or lunch breaks at work in the shop. I do lots of my collecting at work as well. Im a maintenance repair person for a rental management company. We own and manage over 2500 individual dwellings, some houses, duplexes, attached townhouses or apartments and I care for the entire north side which amounts to approximately 500 units. Its a fun hobby to have cuz you never know what you’re going to find or when… sometimes its from repair work or sometimes you just get lucky and find stuff
The total breakdown of each armature was verry calculated and perfect, including the 3 differences in scrap value prices witch I really appreciate you taking your time to show us fellow scrappers,scrap happy buddy 👍
Thank you so much! I have fun doing all that and I’m glad you and others enjoy it.
Have a great rest of your day and may the peace of God be with you!
@@scrapitall200 am glad buddy ,maybe one day I'll be sitting with you on your scrapping couch and scrapping offcourse, god bless buddy
That would be fun. God bless.
That tip with the side cutters will save me a lot of time . Thanks for sharing .
Awesome, I’m so happy my video helped.
Thank you for watching.
Ohhh! The hours I have spent extracting copper from small armatures and you make it look easy! Thanks.
I sure do hope some of these methods will help you.
Thank you for watching.
Absolutely great video , I used to hate doing these , with watching your techniques think I’m going to find them easier to do now , thank you
I sure hope it will help you!
Thank you for watching buddy, I appreciate it.
I'm just starting to recycle scrap here in Germany as a hobby and part-time job. These videos help a beginner like me tremendously! Thank you. I look forward to further informative articles with tips and tricks on the subject of scrap processing and scrap trading.😊

That’s awesome! I think you’ll really enjoy scrapping.
@@scrapitall200 Indeed I do! I like the idea of urban mining.
@@frame-un7um heck yeah buddy, I love it too
Yeah, a hobby. A hobby of people that need to get a decent job, if possible.
@@frame-un7umof course you do. You're poor.
Really great guides, thanks for sharing these quality techniques! It’s good to have a few different ways to do these things, sometimes one works when another doesn’t 👍
Thank you so much, I really appreciate you watching.
Been a big fan of your videos for the last 3 years.
Really enjoyed this.. Different options yet all realists and not time wasters.
God Bless!
Awesome! Thank you for watching.
Have a great day and God bless you.
First video. Loved the prayer!
@@DylanBibles awesome, thank you!
God bless you!
I scrapped an armature a few weeks ago. I sure wish I had seen your video before. Thanks!
Oh dang! I hope my video will help you for the next one you do.
Thank you for watching.
Do these often but learned so much more with your video.
From Niagara Falls Canada, Thx so much!
That’s awesome! Thank you for watching from Canada 🇨🇦
Thanks for sharing your work with us. I appreciate the dollar value breakdown - and the prayer, too :)
You’re welcome!
Thank you for watching, I appreciate it.
God bless you!
One more metric you could possibly add is a scrap per hour of item. For example, there might be three different times for the different size motors. take your fastest time in seconds for clamping cutting and punching/cleaning. Then how many you could fit into an hour by that method. It would tell people which items are the priority highest per hour items to do first in a time pinch and can do the lower per hour items later or sell them as is. I thank God for your encouraging and educational videos.
Thank you for the suggestion I appreciate that.
God bless you!
Just wanted to tell you that I tried this and so far it’s helped me. Thanks again scrapitall
That’s awesome! Thank you for letting me know!
@@scrapitall200no problem brother. You’ve taught me quite a few things that has helped me so much.
our time is important,our time spent on doing this is valuable in the fact it is relaxing and stress relief,excellent job well done and explained ❤
@@Daniel-b6c9q I agree, it relaxes me which I’m sure relieves my stress. Thank you so much.
I'm so grateful to you! I have a whole box full in the basement and never really knew how to work with them, the machete and vise method works great for me, just tried it out right after watching the video, you're the best, thank you!
That is really awesome, I’m so happy my video helped you, thank you for sharing that with me.
I have scrapped a few of these, and some were easy, others wasted too much time and energy! So I have a bin full of these figuring maybe one day I'll find a better way, or scrap will be so high it'll be worth my time, but now I have hope that it's not a waste of my time. My yard only gives shred price for these so I've been saving them up. Love the video and your breakdown, really appreciate it buddy, God bless
@@paulburrows2120 I hope they’ll be easier to scrap, especially since your yard only pays shred price for them, that surprises me!
Thank you so much and God bless you and all of your loved ones!
I always throw them into my shred because i can’t never get the copper out of them. Now if I ever run into another one I will give a try thanks for showing how to do it! Great video my friend!
Oh buddy, don’t toss them in the shred, they can at the very least go as copper motors.
Thank you my friend, I appreciate that.
Don't throw them in shred. Sell then as electric motors of you can't pull the copper out.
@@scrapitall200 I won’t next time buddy hope you have a great day buddy
@@Kreacher1974 will do that next time buddy!
@@ScrapMan69 thank you, you too!
thank you for this video it gave me a lot of information .I'm just a hobby scrapper and do scrapping to keep myself busy after retirement so I watch your videos all the time and enjoy them very much
You’re welcome!
Thank you so much, I appreciate that.
It’s definitely a great hobby 😁
Of course I liked your content. I'm always learning something new when watching your videos. Right off the bat I found out that TH-cam unsubscribed me from your channel; something that has been happening alot. Not your problem. Thx for the prayers at the end!
@@manayunk770 yeah I’ve experienced that myself, very frustrating.
Thank you so much for your support.
God bless you!
Hey SIA! Thanks for this tutorial. once i have set up my workshop, ill pull back this armatures out of the "little motors bin" i have and try to seperate them! 👍 have a great time till the next video!
Hi Sascha my friend. Sounds great, thank you for watching.
Have a great week my friend!
I honestly had no idea! You just changed my entire disposition on life!
😂
Well I’m happy my videos are helpful brother! Thank you.
God bless you, Scrapitall.
Thank you!
God bless you too.
@@scrapitall200thank you!
Thank you sir for showing how to scrap and praising the Lord.
Thank you so much!
God is great!
God bless you.
I've only tried the last method and then just started stockpiling because it didn't seem worth doing one at a time. I might just keep holding onto them for when I have a press and do the first method. It will save my shoulders for sure. Nice to see so many ways to do it.
Another thing you can do and I’m also going to do it. Put them in a crucible and melt the copper away.
Happy you enjoyed the video!
Glad i watched this. I just took apart a kirby and needed to get out the copper. Thanks for the video.
@@lindabradford9591 perfect timing.
Thank you for watching.
When I am Curbside Scavenging and find items to recycle, I disassemble the item completely. From the brass in the plugs to the screws holding the item together. The plastic pieces is the only discarded. ♻️💲♻️💲♻️💲♻️
Sounds like you scrap it all lol. That’s awesome. Thank you for watching my friend.
I do the same thing complete tare down . No matter how big or small it is
Been struggling getting copper of the ones with the steel rods! Made my life so much easier thank you!! Liked and subscribed 🙌🏻🎉
Thank you so much, I appreciate that and I’m happy my video is helpful.
I like watching you scrap and speak about what you are dong. Thanks for the details...keep it up!
@@CuBarron635 thank you so much!
I just started learning how to do it yesterday and now you taught me how to actually do it thank you way cool sir👍🤓
Awesome, I’m very happy my video is helpful.
Thank you for watching.
Thanks for teaching me something new today. I was taking the windings out go a motor but not the armature thanks for that. 👍👍👍
You’re welcome.
It definitely adds up. Thank you for watching.
Thank you for an awesome break down of the ways that you have found that work for you. I have buckets of these to do and now I will try your methods. Please keep up the amazing work that you do.
Thank you so much, I appreciate that.
Thank you for watching!
Nice and informative video, the time it took to gain a dollar, either hobby or side income is always a plus. Thanks for providing this information. Stay safe and may God's blessings surround you and your family. See you on the next video.
Thank you so much, I always appreciate your kind and encouraging comments.
See you then and God bless you!
Thanks for teaching me something new today. I was taking the windings out go a motor but not the armature thanks for that. 👍👍👍. Every little bit help
You’re welcome.
It definitely adds up. Thank you for watching.
Thanks for the information. Can't wait to get back to the garage and scrap a big pile of motors. 😀
@@franksanchezjr240 you’re welcome!
Thank you for watching. Happy scrapping 😁
Great video! My plan was to chuck them in the furnace and melt the copper away from the steel but you made chopping them in half look easy!!
That’s my plan as well, I’m wanting to get into sand casting art!
Thank you for watching!
@@scrapitall200 Brilliant! That's why I don't turn in my copper or brass, I'm stacking it all for casting 🙂
@@SollersScrappingandDiving that’s awesome! You have a channel about the art you make?
Great video! Wish I saw this before. Just took in about 3 brute buckets of these from treadmill motors that was saved up, because they looked difficult to deal with...
@@HagstromF20 oh bummer. Yeah the treadmill ones are pretty easy to do in my experience.
Thank you for watching.
Great video! Thanks for the tip about letting the weight of the angle grinder do the cutting in order to lengthen the life of the blades.
Thank you!
It takes a little longer to cut things, but it really does help a lot.
Great video, thanks for sharing the tips . God Bless
@@Kidd-b7v thank you!
You are welcome and God bless you too 😁
Thank you, Sir. I never thought to cut them in half.
Thank you! I’m happy my video was helpful.
Thank you for watching
@@scrapitall200 I always enjoy watching your videos!
Thank you, I really appreciate that!
Yes you do make it look like cake lol. But you are the only scrapping channel i have found that can actually give clear and easy to understand directions as you go. You must be a teacher lol but thank you keep them coming i learn so much! And the rain is am awesome bonus. I live in the 🏜️ so enough said lol
Thank you so much, I appreciate your kind words.
I love the rain and I’m very thankful for it.
Thank you for watching.
Thanks for sharing this, I’m actually going to put these tips to practice
That’s awesome!
Thank you my friend.
Another great video I been scrapping since I was a kid I usually just cut the ring around the brush fingers then place them in a wood fire then tap the shaft on a block copper falls out of the bottom then do the copper fingers on top copper is cleaned no coating and the steel here is #2 prepared thanks for the prayer at the end of the video our father God and our lord Jesus is awesome
Thank you!
I prefer not to burn that stuff, just my personal preference but I get it with well.
Amen to that.
God bless you abd thank you for watching.
Thank you sir for showing us this process to enhance the profit I'm going to use this on my next amount of armature six stars brother
Heck yeah brother, that’s awesome. I’m happy to have helped!
Thank you for watching.
New to scrapping here. Broke up my first vacuum this weekend, a Kirby 100th edition. All copper fortunately. Once I get a stack of armatures I will try your techniques. Thanks!
Awesome, I’m always happy to meet new scrappers. Thank you for watching!
Very very informative and such a great tip how to clamp them in the vice
Thank you so much my friend!
@@scrapitall200 your welcome
Hope you have a great day
Thanks for the how to James! Great video keep it up. God bless
Thank you so much!
Sorry I didn’t finish answering your question last night during the livestream.
God bless you!
Truth is I have no idea why the prices are so low here but it’s ok, I just love scrapping lol
@@scrapitall200 all good lol. We had a good time and that’s what mattered
@@lljairsoft1201 awesome! I had a good time too.
Good job!
@@dirkfrazier9779 thank you!
Very good !
@@tye_utube244 thank you!
Pretty cool break down on a hard subject, you clearly found a easy way brother ✌️
Thank you so much, I appreciate you stopping by and watching!
That was just perfect from the get go 👌, great video James
Thank you so much, I appreciate the kind words buddy!
@@scrapitall200 anytime my friend 👍
How’s it going? Family doing good?
@@scrapitall200 am not to good mentally, family are good buddy thank you for asking
@@nightscrapperuk13 sorry to hear! I’ll be praying for your mental health.
I used to throw this stuff away from me 😁 now I'm selling it in my scrapyard without scrapping (price: 0.76$/kg) good job 🎉🎉🎉
Right on brother! I appreciate you watching.
🤙🤙👍 definately a labor of love,good thing to do when its to cold or raining ✌️
Lots of those types of days where I live lol.
Thanks for watching buddy.
👍
I can't tell you how many of these I've scrapped as electric motors because I couldn't figure out a good way to do it. Of all the scrapping tip videos Ive watched this might be the best one I've seen. This and the one where you used the machete to split the electric motor. I don't know if I have a machete but I'm sure going to look around to see if I can find something that will do the trick. Great videos and excellent tips keep up the good work. I don't subscribe to many channels but I will to yours.
Thank you so much for that, I really appreciate it!
A meat cleaver works as well if you can’t find a decent machete, although they don’t handle the abuse as well as a machete.
Thanks again!
Great video and information!
Thank you so much!
The cylinder you pealed the individual stripes of copper off is called the, commutator. Thanks for demonstrating how to remove the copper from those difficult armatures coated shellac.
Right on, thank you!
You’re welcome.
Very informative. I enjoyed this and you gained a subscriber. 👍
@@Cody_Buck awesome!
I appreciate that very much, thank you
This is very helpfull. Going to try this. I saved some up with lots of lack on it... 👍🏻
Excellent. I hope it goes well for you and thank you for watching, I appreciate it.
Great video and breakdown, God bless you
Thank you brother!
God bless you.
How have you been doing?
@@scrapitall200 Doing ok, just been way busy lately. Trying to keep my mind occupied.
@@dalemills8052 that’s good brother.
You’re in my prayers.
Thanks for the heat gun trick and especially the blessing.
@@ZEPPELINATTACK you’re very welcome!
Thank you for watching.
love the breakdowns on prices ..great value added !!!
Thank you!
I appreciate you watching.
Like the side cutters hack as well. I just smash the commutator up but I will be trying your method next time
Awesome brother!
I knew they were called commutator because I’ve heard you call them that multiple times but my brain went blank making the video 🤣
Thank you for watching.
@@scrapitall200 mine does that all the time with armatures 🤣
@@ScrappingScotland 😂😂
Great show
Thank you
ohh man great tutorial and a good prayer thrown in for free. Greetings to you scrapitall from New Zealand
Thank you!
God bless you and New Zealand.
Good tips. All a matter of wehat you value your time at, of course. I used to leave the copper bits that you peeled off the shaft...if I was still scrapping lots of motors I'd use that tip. Generally, the heavily varnished ones I scrapped as they were.
I’m very happy I can just do this as a hobby otherwise there’s lots that just wouldn’t make sense time wise. Thank you for watching buddy.
Спасибо, надо будет попробовать вашим методом 😁
Awesome!
Thank you for watching!
Fantastic video as ever. Thank you! 👍
Thank you so much!
Wow how simple, Thank You So Much!! Love the hammer work :-)
You’re welcome!
Thank you so much for watching.
Very nice breakdown and helpful for new and old scrappers alike. #teamSHTF
Thank you so much!
Amen Thank you! Great lessons!
Thank you so much!
God bless you!
Thanks for some new ideas, I tend to scrap the, too, some of the price is offset by electricity and using up some of your cutoff blade. I still think its better to separate.
You’re welcome, glad you enjoyed it.
I think it’s worth it.
Thank you for watching.
That was a very good video. I will try this on mine. That was great information
Thank you so much brother, I appreciate that.
i always threw these out, thank you Scrapitall. I have a tip 4 U, on your angle grinder, screw the handle on the opposite side, fix the cover guard upward and your sparks will fly away from you but you probably already no this. Godbless.
Very happy my video has helped.
That’s a good tip and I appreciate it. I actually wanted them to go where they did because I’m using a shelter logic tent as my shop and I didn’t want any sparks or hot copper dust to hit the tent. Normally I do all my cutting at my outside workbench but it just wouldn’t stop raining lol. I do appreciate the useful tip.
Thank you for watching and God bless you!
Awesome video.
Thank you so much buddy!
thanks for your insight and may God bless you as well!!
Thank you and God bless you too
Great video thanks for the lesson:).
@@GeneCenora thank you so much
Nicely explained Scrapper
Thanks buddy!
I appreciate you stopping by and watching.
Thanks for the tips, I currently have some armatures sitting around
@@Ken-ei8xf you’re welcome!
Awesome, I hope it goes well for you.
THANK YOU FOR THE VIDEO
@@liljoeii6091 you’re welcome!
Thank you for watching.
It helps a lot to warm up the coils with a propane hand torch.
I did mention in the video to use a heat gun to warm it up, unless I’m remembering a different video lol
Great video, another handy how to. 👍🏻
Thank you, I’m happy you found it helpful.
Amen
I loved your video and even more your message at the end keep it up and I wish you all the best 👍👍
Thank you!
I appreciate you watching and God bless you. Have a wonderful day!
Good day scrapitall Boy i interesting video Thanks
Thank you brother!
I appreciate you watching.
I’ve got 2 pairs of wire cutters and I always use the Made In China ones (cheap) for the rough stuff. I can certainly relate to that.✌️
Absolutely! My older pair is a Doyle brand from harbor freight, they have a lifetime warranty which is nice. They cost around $10 a few years ago. Probably double the price now lol. But they’ve been really good! But I’ll never misuse the Knipex, especially since they were a gift.
Really great video!
Thank you so much buddy!
You're welcome
Another great video brother. I always get at least one new tip from your videos. Thanks for sharing with us. God bless my friend.😎😎⛏⛏🔥🔥
Thank you so much brother, I greatly appreciate that.
God bless you too!
Great video! Take Care.
Thank you brother!
very helpful I have never scraped an aemature
Glad my video was helpful.
Thank you for watching.
Hi bro. Again thanks for sharing a very informative video. Respect to you and God bless you.
Thank you brother!
God bless you too!
Have @Wonderful New Year's !//thanks
Thank you, you too!
Great video mate. Cheers Graham
Hi Graham, hope you’re doing well buddy.
Thank you for watching!
@@scrapitall200 I am mate, thx 🙏 for asking
@@theaussienurseflipper.8113 awesome! You’re welcome!
Great video my friend
Thank you my friend!
@@scrapitall200 ur welcome
@@bigcountryscrapper6885 hope you’ve had a good day, James!
Thanks I really needed to see what you did.
You’re welcome. I’m so happy my video is helpful.
Thank you for watching.
Salut super boulot, merci pour votre vidéo 🙏👍
Thank you, you’re welcome!
I appreciate you watching.
Bonjour de France, Alsace, merci beaucoup avant je coupait a la meuleuse les rotor et sa me plaît pas car les Perte en poussière sont conséquent, je ferai les prochains selon Votre méthode avec pince et hache , grand Merci Mr 👍
@@ricilgrosjean675 excellent!
Again, thank you for watching.
Are those all found? I rarely get those. Great info!
Yeah they all came out of stuff I’ve scrapped. Blenders will have them and other appliances that have small copper motors.
Thank you my friend.
@Nachostuff, you would be surprised if you had more time to open up scrap goodies instead of scrap it. 😆
I see what you meant with the dust flying. Definitely a job for an open, ventilated space if you can.
Right?!
Absolutely, definitely don’t want to breathe that in, nor have it get all over everything lol.
Thank you for watching my friend.
Could also use a Sawzall to eliminate some of the dust
Great breakdown procedure too
@@aaronedmunds4829 you definitely could. I never even thought of using that in this video. I personally don’t like the sawzall (too much vibration) but it will definitely cut down on the dust.
Thank you very much, I appreciate you watching
That was awesome it go's for shore that in worth spending a bit of time these increase the money 💰
Absolutely! Thank you for watching, I appreciate it.
Great tips. Subbed
Thx
Thank you so much, I really appreciate that.