Part 1 Make This Multiple Color Wavy Flag - Step by Step Tutorial - You Can Do This Yourself

แชร์
ฝัง
  • เผยแพร่เมื่อ 4 ธ.ค. 2024

ความคิดเห็น • 18

  • @eitantal726
    @eitantal726 4 หลายเดือนก่อน +1

    Caring about the overlap is the difference between mediocre work and great work. Well done

  • @brianwrigglesworth3599
    @brianwrigglesworth3599 4 หลายเดือนก่อน +1

    Only 25mins in love this had to pause as England v Spain football on TV (soccer to you lot) thanks for another informative video.

    • @RobSandstromDesigns
      @RobSandstromDesigns  4 หลายเดือนก่อน

      @@brianwrigglesworth3599 thank you for watching and commenting. I took some time today to watch Scottish Open Golf Tournament

  • @ssddcc
    @ssddcc 4 หลายเดือนก่อน +1

    Thanks Rob - Great video, love the step by step approach

    • @RobSandstromDesigns
      @RobSandstromDesigns  3 หลายเดือนก่อน

      Glad you find my approach helpful. That is my goal. Thank you for taking the time to let me know.

  • @thephoenicianartisan9895
    @thephoenicianartisan9895 4 หลายเดือนก่อน +1

    thanks for doing this rob, looking forward for part 2

    • @RobSandstromDesigns
      @RobSandstromDesigns  4 หลายเดือนก่อน

      @@thephoenicianartisan9895 thank you for taking to leave a comment. Been working on part 2 today.

  • @kevinrich4637
    @kevinrich4637 4 หลายเดือนก่อน +1

    Thank you Rob. I have a couple of epoxy ‘enhancements’ I need to do later this week that have some small colors. The overlays should work great!

    • @RobSandstromDesigns
      @RobSandstromDesigns  4 หลายเดือนก่อน

      Hope it helps - let me know if you need some additional information.

    • @kevinrich4637
      @kevinrich4637 4 หลายเดือนก่อน +1

      @@RobSandstromDesignswill do thank you!

  • @sharonsimonson5392
    @sharonsimonson5392 4 หลายเดือนก่อน +1

    I’d love to see a video on this epoxy inlay method using a laser.

    • @RobSandstromDesigns
      @RobSandstromDesigns  4 หลายเดือนก่อน +1

      I would love to demonstrate a method but haven't figured one out that would be the same. Unfortunately, can't laser in epoxy because it can be poisonous. There may be other techniques, will have to think about what I might be able to do.

    • @sharonsimonson5392
      @sharonsimonson5392 4 หลายเดือนก่อน

      @@RobSandstromDesigns I was thinking about pouring the individual pieces with the appropriate colors. Then outline everything including a border and cut out (like a stained glass window), add to the backer and add the colored pieces, then remove outline piece but not the border. Then fill the outlines with a colored epoxy.
      If you played with kerf you could create the pieces to fit exactly and then add to a backer with a border and then pour clear to finish and seal.

    • @RobSandstromDesigns
      @RobSandstromDesigns  4 หลายเดือนก่อน +1

      @@sharonsimonson5392 that may work. I have used epoxy with my laser in the past in a few limited cases - similar to what you are sharing. If you decide to go down that path, you would want to use real hardwoods vs. plywoods/veneers. My experience in using plywood with laser jobs and epoxy pours is during the finishing of the epoxy - to get the sheen and results for finish - it is hard to avoid not sanding off the veneer of the plywood. If you used solid hardwoods that may be able to be avoided.

    • @sharonsimonson5392
      @sharonsimonson5392 4 หลายเดือนก่อน

      @@RobSandstromDesigns Thanks! Could you do a video on how to adjust the kerf, so that the pieces will fit together exactly without the spaces? I’ve watched many videos about kerf and I get it for things with tabs and slots, but can’t seem to get it using the offset kerf feature, which I believe is what you need to accomplish it!

  • @sheldondrake8935
    @sheldondrake8935 4 หลายเดือนก่อน +1

    so you're just going to smear food all over that? seems very unpatriotic. Did you buy the sneakers?

    • @RobSandstromDesigns
      @RobSandstromDesigns  4 หลายเดือนก่อน

      @@sheldondrake8935 I’m afraid I don’t quite see it as unpatriotic at all or I wouldn’t have made the tray. But we each have our own perspectives. This flag stands for us each having that right. As for the comment about sneakers I have no idea what you’re talking about. Thank you for taking to comment.