I followed this same technique for a Roundhouse 60" Bulkhead Flatcar and the result came out fantastic. The only thing I did different was used wax paper instead of white paper and it peeled off without any difficulty.
Again Peter another fantastic job on your pulpwood load ,looks absolutely lovely.I will have to make several of these myself, as these are the best I have seen.....just perfect sir !!
So you compare me with Picasso do you? I've never really been interested in painting, but architecture is a different story. Maybe Frank Lloyd Wright or Le Corbusier. Anyway, thanks for the compliments.
Thank-you. I don't like the cast resin log loads either When I was first getting ready to build some loads, I did briefly wonder if I could build one and then cast copies, but quickly decided against it. I think that even if I had a huge layout and needed 100 pulpwood loads, I would still have to make them all one log at a time.
Wow a logging camp that is part of my layout build and then the mining camp nice to see how you make most things most people buy them but that's no fun I love making things..... best wishes Ken
Really enjoy your video's. I appreciate your thoroughness, yet your desire not to be a perfectionist at every turn. Some things just don't really matter !!
Yes, all wood shrinks as it dries out. I'm told that a few seconds in the microwave speeds the process so you don't have to worry about it later (see other comments).
Very nice, I tried something similar back in the 70's with my first HO layout...Unfortunately I glued the load into the car and about 6 months later I had a very warped car that would no longer run because of the twist in it...never gave any thought to protecting the car. John JL&SH
Well when I did I mine, 45 years ago, no microwaves or such then, I just used a heat lamp. But then I was only building for a single car (for a 4’x8’ layout that had to fold up and away into a wall). I only had high school/university to worry about.
Great work Peter. have you ever thought about putting the wood on a cookie sheet and putting it in the oven and baking it for a little bit to dry out your wood so you don't have to wait so long for it to dry out.
I did similar in Z scale. I did cover my car with plastic keep fresh foil. After loading/glueing the wood, I soaked it with diluted white glue (like with ballasting track). After drying the load did also shink but the load is invissibly sealed with white glue. The plastic foil does not stick to the wood.
Not really. Total time per load is about 3 hours for the plain bulkhead cars (one hour to chop wood and two for assembly). The other types take a little longer because of the end frames - say 3 1/2 hours each. So my best guess for all 8 would be around 27 hours total. That's probably less time than I spend on a typical structure kit-bash.
Very nice video.
I've seen other modelers use this same technique, but it good to see used in gondolas.
One more thing, GO YOU 'R's!
I followed this same technique for a Roundhouse 60" Bulkhead Flatcar and the result came out fantastic. The only thing I did different was used wax paper instead of white paper and it peeled off without any difficulty.
How did you handle the shrinkage issue? Did you come back later and extend the load or wait until the wood was completely dry before assembling it?
I actually had the twigs for a couple of years so shrinkage hasn't been an issue.
Again Peter another fantastic job on your pulpwood load ,looks absolutely lovely.I will have to make several of these myself, as these are the best I have seen.....just perfect sir !!
Very nice work. Thanks for sharing, I will definitely be using your method.
As always peter your work is impeccable !!!! Attention to detail even on a simple build is picassoesque (sp)
So you compare me with Picasso do you? I've never really been interested in painting, but architecture is a different story. Maybe Frank Lloyd Wright or Le Corbusier.
Anyway, thanks for the compliments.
Awesome work. The natural material always looks better than the resin or plastic ones, IMHO. love your work.
Thank-you.
I don't like the cast resin log loads either When I was first getting ready to build some loads, I did briefly wonder if I could build one and then cast copies, but quickly decided against it. I think that even if I had a huge layout and needed 100 pulpwood loads, I would still have to make them all one log at a time.
Very therapeutic - I would never have thought so. Great end result, authentic looking.
Looks great. 👍😊
Awesome, the chopping is monotonous but the results are worth it! Starting my 50’ bulkhead load today.😁
Great work and patience for realism. Bravo!
Wow a logging camp that is part of my layout build and then the mining camp nice to see how you make most things most people buy them but that's no fun I love making things..... best wishes Ken
Great work Peter. Now that's a lot of pulpwood. Love the run by at the end. Thanks for the update.
really nice. you never cease to amaze me
Don't wait years to dry them. Stick them in the oven on a very low temperature for 4-6 hours. or put them on the radiator in your home overnight.
Looks fantastic ...as usual!!!
Looks great. Thanks for sharing
Those pulpwood cars were something to keep an eye on when switching in real life. Logs sometimes shifted and fowled clearance on the next track.
I think mine will be okay as I glued the logs in place. I do feel sorry for the HO-scale workers who have to unload it though.
@@mpeterll it’ll give them something to gripe about 🤣
Really enjoy your video's. I appreciate your thoroughness, yet your desire not to be a perfectionist at every turn. Some things just don't really matter !!
hi Peter... great job on the pulp wood loads... i didn't know that they would shrink.. thanks for the info & posting this video... vinny
Yes, all wood shrinks as it dries out. I'm told that a few seconds in the microwave speeds the process so you don't have to worry about it later (see other comments).
Great looking loads!
Very nice, I tried something similar back in the 70's with my first HO layout...Unfortunately I glued the load into the car and about 6 months later I had a very warped car that would no longer run because of the twist in it...never gave any thought to protecting the car. John
JL&SH
Well when I did I mine, 45 years ago, no microwaves or such then, I just used a heat lamp. But then I was only building for a single car (for a 4’x8’ layout that had to fold up and away into a wall). I only had high school/university to worry about.
Looks Fantastic
Great work Peter. have you ever thought about putting the wood on a cookie sheet and putting it in the oven and baking it for a little bit to dry out your wood so you don't have to wait so long for it to dry out.
Yes I did think of that but decided not to (see my earlier reply to Brent Aritt's comment).
Very cool keep up the great work I also subbed to u
I did similar in Z scale. I did cover my car with plastic keep fresh foil. After loading/glueing the wood, I soaked it with diluted white glue (like with ballasting track). After drying the load did also shink but the load is invissibly sealed with white glue. The plastic foil does not stick to the wood.
Wax paper may even work as well.
Very nice , a long time to do all 8 I see
Not really. Total time per load is about 3 hours for the plain bulkhead cars (one hour to chop wood and two for assembly). The other types take a little longer because of the end frames - say 3 1/2 hours each. So my best guess for all 8 would be around 27 hours total. That's probably less time than I spend on a typical structure kit-bash.
Maybe use wax paper instead of regular paper. Won't stick to logs.
Regular paper can be drawn on more easily, and the sticking does not matter.