I was shocked, "shocked" to discover that speaker concoction sounded terrible. Haha! Thanks for taking one for the team, Randy, with that audio project. :)
Randy, The funniest thing about this video was your face whenever those ‘speakers’ were playing. You didn’t need to describe the sound your face said it all! 😂
I saw the same video a few years ago and decided to make the speakers. I used the same parameters as the professor that made the video. Especially placement of the exciters. As you profess, they didn’t sound great when I made them. I used an in-line capacitor as a cheap crossover. I bought a 10 inch subwoofer from Goodwill and I hooked them up to a, The Fisher 195. They are in my garage where there is a lot of room. I still have to turn down the treble on the fisher. You can make them sound decent, but you have to put some work into them.
I have a friend who has built these speakers. He used 4 panels, 2 on each side, so the exciter placement was identical on both sides. After sanding, he also coated the panels with mix of water and PVA glue. He used epoxy to put the hooks in the foam to hang them. The panels where then painted black with a specific spray paint. He built a rack to hold the panels taut at the corners. They sound amazing. He does use a sub with them to cover the lowest frequency but the sound is detail, spacious, the highest are natural and airy.
was thinking that. if randy had not only listened to 100s of speakers but also built 100s of speakers, the results and/or setup might be quite different.
No matter how funky the implementation, it'd take a lot to convince anyone with ears that his made the sound THAT BAD compared to absolute peak performance.
@@Avruthlelbh maybe... his attempt was not only just a bit half-hearted though. he didn't use the exciter that was spec'd, so it's kinda like building a half-assed enclosure, then ordering a random "40 watt" driver to install in it. that's not a recipe for success.
Have you watched the videos of the original creators? I think it was tech ingredients. If I'm not mistaken, the panels looked different, and they already stated you need a sub. They also superglued the exitors to the panels.
I built the ones with the acoustic ceiling tiles, and they sound ten times better than the ones with the thick foam. I'm not an audiophile, but for the price i've never had a more room-filling non-directional sound than what i get from these.
Any previous videos on these says They’re supposed to made with acoustic panels. The tictoc video mustn’t have mentioned that or I’m sure he’d have used them. Hopefully he tries them in future. I’d like to see them working with ribbon tweeters & a good sub
Loved your face and the delivery of your initial listening verdict! I came to your channel for a speaker review and now watch thoroughly as I love your hosting and writing. Great work!
I did similar project. I glued frame behind the board and screwed the exciter on the crossmember wich connects to sides of the frame. This took away this rattling distortion and gave little more bass. Now with the help of equalizer they are playing backround music for the back yard on my balcony. I did measure frequenzy responce and usable range is between 90-8k hz. Under 90hz is nothing! But over 8k it fades down somewhat smooth.
Omg, the entertainment value... Between the sound being produced, the song selection, the look on your face as you tried to say something redeeming about the outcome and finally the look on my dog's face as i laughed until i cried. What a fun video. Thanks Randy! 😂
@cheapaudioman, It's really funny that you made this video, because building this speaker myself ultimately led me to find your channel. I was initially into headphones and decided I wanted to experiment with speakers at an affordable price. That and I was looking for a project to do with my father-in-law to build our relationship. Built them, sounded terrible, decided maybe it was the crappy amp I used. Looked for a cheap decent amp, found your review of the Aiyima amps. Bought the amp, came to the same conclusions you did on the speakers. Now I have Jamo speakers (per your review) connected to the Aiyima and am happy I went down that journey. DMS (TH-camr) also had an interesting take on these speakers... He used a thinner foam core, but 12 of them and mounted them to completely cover a wall. He then used a ton of software to correct the missing frequencies. It looked cool and he said that it produced a unique "expansive" sound that was decent but ultimately was a lot of work to get a that sound.
Couple things, 1, ceiling tile, the kind used for absorbtion, or something similar. Plain packing type foam board isnt really gonna do much. 2. Mount them using rubber bands in the corners to hooks on the wall putting them maybe an inch away from the wall, 3. I used a 4x8 sheet for my builds 4. run dsp correction. Mine are hooked to my 4x8 for a reason 5. Sub or bassbin woofer for everything below 200hz Ive got 4 4x8 panels hooked up around the living room with 2 6 inch woofers in 2 corners, everything sounds pretty darn good. Nothing like this demo. But yes, was a good bit of work to get it done like this.
If you actually construct these according to directions using the proper drivers, hang them PROPERLY (which will YES rule them out for most people), and supplement them with sub woofers to provide the bass, I think you would end up something that sounds much better. GIGO? When you go into a project with a defeatist attitude using subpar ingredients you end up with a subpar experience. Try building a Sony SSCS5 with "whatever you have laying around" , using whatever tools you happen to have even tho doing so you know going in would kill it, then what, you think you're gonna end up with a perfect clone of the Sony? I Don't THINK so..............
Tech ingredients channel did some videos on worlds best speakers 5 or 6 years ago that looked promising or at least like a fun experiment. Alot more in depth than the TikTok crap.
@@bryanmcgivney3778 I think Tech Ingredients was the one who came up with this design. I watched that video years ago. You can even see that video at 1:10 in this video. I'm pretty sure it just spread much more on Tiktok and that's where most people hear about this. If I remember correctly, Tech Ingredients also glued some metal bars at certain locations across the back of the foam board to help with resonance or something. The few videos I saw replicating this speaker never included this step. How much this will actually help to be seen.
Yes, Tech Ingredients was the OG poster, with instructions on how to make separate bass panels too, out of ceiling tiles. Very complete, detailed instructions.
Thanks! I’ve been curious about these for a long time. Thanks for doing this so I don’t have to. Use this money to buy audiophile grade shish kabob skewers.
I played around with these a couple of years ago. You need to sand off the panels until dull and apply two coats of 50/50 water and white carpenter glue. Apply heavy duty foam weather stripping around the edges. This improves the sound. In my dedicated listening room, they were fun, more like being at a live concert, warts and all. But they certainly aren't hi-fi by any stretch. They do scale well with high end amps which really surprised me. I doubt if the technology could be improved even if the panels were made of some near perfect materials.
Almost positive the problem is you still need crossover and need 1 exciter on a pannel to do highs and 1 on a pannel for lower end. You can try it since you already have everything you need(now half the size lol) but will end up with one speaker channel. Would be a fun test and an extra video if it came out sounding good
If he was playing it back and it sounded full-range, but was having trouble with distortion and maintain control, then this would make sense. But separating the frequencies isn't going to magically make the setup capable of playing frequencies down low.
I built these with 5w drivers. I can say that you definitely need a 2.1 amp with eq control and a sub, also you cannot overdrive them. They are best used as ambient mid/high clarity paired with other panels or speakers. Honestly you should pair them with wood panels to capture low frequency. The foam inherently doesn’t do well with low frequency. But they are definitely a fun build to tinker with. I suggest buying a couple different Dayton audio ones and testing them on doors and cupboards. Things that have thinner wood panels so that you can understand how their frequencies differ with different placements.
In one of Lenny's recent videos he travels to a vintage store in PA and toward the end of the video the store owner shows him a pair of speakers that are remarkably similar to these in concept. Lenny was impressed.
Check it from the 15:30 mark to see the Bertagni speakers... almost the exact same thing, which leads me to believe the shape of the panel and the frame have a lot to do with the sound. Thanks for taking the time to build it Randy.
The pair I made sounded pretty good. I ran then through a subwoofer with an adjustable crossover. Gotta have a subwoofer. I never used them because I have no place to hang them.
I too was drawn back into the hifi audio world by the evil allure of the dyi panels. Yes, the DYI foam panels are absolute crap. That said, the foam does have remarkable sound transfer properties so I decided to try a different route. First I needed an affordable yet decent and highly flexible, basic stereo system. So, based on many of your recommendations and lots of research I settled on the Fosi BT30 amp and their matching little pre-amp. (Amazing stuff) Then I added a Pyle 6 zone selector to be able to isolate and AB lots of speaker combinations. I grabbed a couple of cheap 6 inch Sony subs for $20 from the thrift store. I bought a pair of Klispch 500 rp bookshelves and I re-foamed my dad's old early 90's AT-8 Vegas. Finally I decided to try the dyi panels. The first thing I did was to not slap an actuator on a flat panel and call it done. I used my 30 or so years experience in the audio visual world and as an artist and maker to shape and construct the foam into proper speaker heads. I then placed them into a housing with soft surrounds just like an actual speaker...duh. Right out of the gate I knew I was on to something. They sounded incredibly clear and rich. My guess is that the cellular nature of the foam is a more efficient transfer medium than compressed paper. I can't speak. to the other types of cone materials used. All the needed frequencies are in those little full spectrum actuators but you have to tease them out with the proper shapes. It took about 3-4 months of prototyping and experimentation to understand what works and doesn't but I can say with some conviction that they are actually now superior to the manufactured speakers I currently have access to. For one they have far more latitude in tuning than speakers with built in crossovers or preset tunings. Being able to shape the sound to the desired texture is what I am fundamentally after and I'll never be able to afford Band and Olufsen speakers so I'm left with figuring it out myself. Bottom line is, don't throw the baby out with the bath water. You really can dyi good speakers using stone knives and bearskins as Spock once famously said as he cobbled together a video time machine from 1930's electronics.
for the best sound you can use 2 exciters one center and the other in the ofset position for relly full range and you can increase the size of the panel to 2'X4' for even more sound.
I have built these out of everything from 7 dollar home store "paintings", to frame stretched resin impregnated hemp canvas, to this foam. They may be "cheap" but they take a lot of time, effort, and creativity. Slapping them together just doesn't cut it. A few points: Bigger panels= more bass= even less practical. A sub will almost always be necessary. A frame with foam suspension makes a big difference. Also, with a frame, you can have a solid brace to actually mount the exciter to. If it's kind of just flopping around back there, of course it is going to distort, and have resonance issues. Maintaing linearity of the coil is crucial. Foam panel should have paper sanded off,and surface essentially plasticized, with thinned out glue such as elmers. Corners should not be necessarily be the same radius, helps reduce standing waves. .same with sides, they should be routed. Hard edges on any surface will affect sound. If there are areas of offensive resonance, you can glue small weights to that spot to dampen. Another you tuber had decent success creating "tweeters" with funnily enough, compact discs. Others have mounted real tweeters to the frame. They can absolutely be made to have a fulfilling sound. But it takes time effort and eventually enough money to where they are no longer cheap. The best bass response I ever got was the 7$ 14x14" print. It was on a hollow plastic frame that acted like a resonant chamber of a sort. While not loudly, it played to the low 30s at a reasonable, and usable volume. It also played significantly higher than foam board as it was a thin, plastic like membrane. Subwoofer, Eq or passive crossover, tweeter that can play relatively low, and you (could) have a very full and rich midrange. A full range speaker, it is not. Audiophile, of course not... But also maybe. Fun and satisfying? Absolutely! I'll try to find, and post video of it if anyone is curious. But yeah, buy one these for 3 bucks, and turn you bedroom door in to a speaker. Or whatever else you wanna stick it to that can vibrate. Have fun, they're pretty cool.
I have always thought about installing those exciters to put behind the wall of the shower. I haven't, because that's way to much work for bad sound, but I've thought about it.
I made these. I put the exciters in the same place on both panels (not center). The separation is amazing! Yes, there is no bass. But try it after you move the center exciter to match the other. Then move them about 6 feet apart. Would you review any other pair of speakers right next to each other? Smdh
I don't have the experience with a variety of speakers like you do, but I made these according to the Tech Ingredients youtube video. There are key differences that may be impacting the sound. I think your exciters are way too big and heavy, so not letting the board vibrate. The hangers are too long, not letting it vibrate. The board appears to be 1 inch, not 3/4, not allowing it to vibrate, you see a theme? I can't say they're the best, but when paired with a woofer for the low end, they sound really good to me.
Ive been kind of wanting to try these since seeing the og "tech ingredients" video a couple years ago. Well, i'm glad i saw this, I just deleted a bunch of the "excitors" out of my wish list on amazon. Thank you for the honest review-you definitely saved me some time and cash
I believe exiter placement position is the most important design consideration for these sound radiators. Also thickness and flexibility of a pannel should matter a lot.
Ha! I was listening to this video using my Fosi Audio T20 tube amplifier and a pair of Sony SS-CS5 speakers (which I love) and yeah, those makeshift speakers do not sound great, but for someone interested in tinkering around with an audio experiment, I hope they have fun with the learning process while not expecting amazing sound as a result. :)
I built these as well, put a lot of thought into building and mounting them (suspended with fishing wire etc). I did the 4 panel setup (squared edge and rounded edge pair with slightly offset exciter placement), then I wired in a subwoofer to get those frequencies below 120HZ. All that, played them and you are completely right, they are tinny, peaky hot garbage. They look cool, and I have kept them there, however I never use them and stick to my pair of Tannoys.
The long pins you used for hanging will definitely alter the sound by making that area of the panel more rigid. I saw the original video by Tech Ingredients a few years ago. I'd hang them by using a large needle to thread either embroidery thread or fishing line thru the panel.
I made them and it takes a lot of handy work to sound decent and you have to break off the plastic top layer. Tech ingredients did a good video on the nuances.
My father has a set of vintage speakers from the 1970's that are literally exactly this. I think they were by Toshiba or something IIRC. Walnut picture frames and an aluminum frame on the backside that also supports the magnet/motor from the backside. They actually have TWO motors/coils on each one - a large one with the coil attached to the larger part of the foam (but thinener) for bass and smaller motor/coils with the coils attached to the upper corners where the foam is thicker for tweeters. I recal them actually sounding rather good.
You should have used monofiliment fishing line to hang the panels for a better renonance and the larger the panels the deeper the tones. and using 2 exciters will give more and better sound. and did you sand both sides of the panels as you should have. these are all factors in the sound quality of these flat panel units.
I work at a cardboard packaging company, and as a fun project built these out of reboard (2 layers of paper separated by a honeycomb structure) Also stiff and lightweight. Same results all high-mid, no lower end. Paired them with a little sub, and now they sound decent enough to act as good conversation starter. ( Yep, even our speakers are made from paper ) Was able to full colour print the reboard though. That gives it a nice touch. Nice video!
I built these exactly as they did on tech ingedients - with additional 4x2 panels from ceiling tiles, and hung them just like he did, across our barn. Powered with aiyima t9, and threw in a sub. They didnt compete with any of my real speakers - but to people not into the hobby they sounded great. And the investment was maybe $100. I'd say if you want a cool project with your kids, or to have a conversation piece at your next party....definitely worth the time and cost
That is exactly what I said. You have to take some time and do some experiments with it, but I found that a cheap crossover capacitor and the subwoofer made a world of difference. They are in my garage and people are amazed that the sound is coming from these panels. Fun project!
The corners should be radiused because it changes the resonance pattern(s) of the panel. The other big issue is they are 2' wide - they will be very directional above about 563Hz - which is smack in the midrange. They are dipole i.e. the sound also comes off the back of the panel; so that backwave will help somewhat? Like you say - they are open baffle speakers. So bass is cancelled out, by definition. The shish kabob skewers will slightly affect the panel's resonances, as well. If you have a fan blowing in the room, or you have the windows open and there is a breeze through the room - these speakers are possibly going to swing a bit?
BSR did the foam speaker thing in the 70’s/80’s. Actually sounded pretty good, but the styrofoam panels were much more complicated, and the “exciter” part was rigidly mounted to a frame at the rear. These foam panels seem way too heavy, as well. Oof.
Exciters do have their place, but not here. My sister and brother in-law were building a house and wanted to have background music in their living room for when they entertain guests. They were going to use in-wall speakers, but my sister didn't want to be able to see them.I suggested putting exciters in the attic space. We attached the exciters to the ceiling Sheetrock between the joists, one in each corner (total of 4). We connected them to a Dayton audio class D amp, and for background music, they sounded rather good. Great for Christmas music. They were thrilled with the results and the fact they don't have to look at them. It's all about the application and expectation.
I need recommendations for a vintage style set of bookshelf speakers that sound better than the Panasonics I bought for $10. They need to match the style of my zenith allegro record player.
Magged a watch once and it suuucked. Mom and Dad gave me a Milguass for grad in 94 and to this day it's my go to for high energy contracts. Love it. Those noise emitters are seriously old skool dorm noise speakers. This was great. Thanks Randy.
Meanwhile, I just got a deal on 5 Definitive Technology speakers, with onboard powered subs, AND an Onkyo 6.1 receiver, with wire, off Craigslist... Haven't had a chance to test them yet, but any suggestions on setup/placement? I'm doing a surround setup in a small room, so... Yeah, bass shouldn't be a problem, but I'm worried that I'll get too many overlapping waves, since the subs will be facing weird directions.
Pretty cool you served on the Nevada. Not many folks can make that claim. Thanks for your service! Did you ever make a tour into Puget Sound? I've seen her in the straits here over the years.
I always heard the 2/3 ratio thing for mounting position was the same for both speakers, except mirror images of each other. One exciter in the middle sounds wrong, but probably wouldn't make a huge difference in overall sound IMO. I made a pair once, and for mid-range voices like Sarah McLachlan, they sounded amazing and more in-person than any other speaker I'd ever heard. The bass buzzed on mine though, and they were ugly pink, so eventually they got trashed. I kept one exciter just in case mounting it to a motorcycle helmet makes for more volume / better sound than typical headphone-sized drivers used there.
Yeah, I tried the exciter thing way back when Partsexpress started selling them. Definitely not meant for hi-fi purposes. More for point of sale displays where it would be cool that sound is coming from no speakers... I bought a portable dayton speaker that also had an exciter as the sound source it was tolerable but it was a pocket sized speaker.
I had some of those exciters kickin' around for a project. For fun, I put one on the soundboard of my piano. Now my piano is a bluetooth speaker when I'm not playing it.
Haven't tried to use exciters with foam, but for my bedroom tv, where I didn't have room for speakers and didn't want anything visible, I used the exciters on my headboard. Sounds great, especially compared to the built in speakers of the TV. But of course that's all based on a compromise, and probably is not nearly as good as just having an actual speaker.
I built a larger pair with rectangular foam board, 2 ft X 3 1/2 ft and used 2 exciters on each, all exciters mounted in the offset (Non-central) position. Got them hanging up in my workshop and they sound fairly reasonable to me, but only with the sub connected as well. Without the sub I'd have been snapping them up after a couple of days. Nice little project providing you have a sub. Wouldn't have them in the house though. Great in the garage.
I have never built speakers, have nothing invested in 'em, but my observations: "The recipie" calls for the membrane to be light and somewhat stiff, you added 2pcs 8inch? long steel rods? Well, "light" part of equation is now gone, it also reinforces the membrane partly in one axis, making several of the resonant modes dampened or maybe dead all together. Maybe with these points addressed it might still be hawt garbaj.
Good tip regarding drive unit magnets. Lowther magnets are so powerful that the manufacturers recommend storing the drivers in sealed plastic bags. If you get a little magnetic detritus in the magnet gap then the driver will need dismantling to clear it out...
DML's are design dependent, the better the design the better they will sound. The design you built is an entry level beginners design intro into DML technology.
I’ve seen the original video. I’m thinking GATORBOARD which is like very dense foamcore. There are many types of these thingys. I would have built it EXACTLY like the engineer prof in the original video. He did a lot of testing with materials etc to arrive at the final product. This type of thing is standard stuff in the world of museum displays and trade show setups that need audio. Fun video.
I made these a couple years ago. Know what they work great for? Rear, sides, and/or overhead surrounds/atmos when you have limited placement options. Also for garage speakers. No way would I use them as Front L or R in any 2 channel or theater system.
I knew it wouldn't be the best speaker design or else other reputable companies would be doing it but I didn't think it would be that bad. Thanks for still being an inquisitive person and making this video!
I've played around with some of these exciters from parts express (dayton audio) and it really depends on what you attach them to. Try different materials and thickness of those materials. Cardboard can be fairly good. They have one that's mega bass exciter and those actually have some thump to them but lacks some in the highs. Any of these exciters can sound great but just depends on what you put them to.
Acoustic ceiling tiles are waaay better than the foam in my experience. Very little bass extension (needs a sub), but the clarity from the celling tiles was great. I also used the slightly better exciters.
“Blown 80’s Tv speaker”😂. My wife showed me this tik tok video, thinking she found a replacement to my big NHT 2.9s…..i am going to show this video to her. 😂
Saw this speaker build project back around the time I first started following you and it seemed too good to be true. But there were a bunch of TH-cam videos on how to build these. It’s been about 2 years since I watched them, but there are tuning tips to make the sound better. One thing I recall is that you need more distance between the speakers.
Thank you Randy for this video!! I came across the tech ingredients video a couple years back and have been super curious about these. I appreciate that you took a great attention to detail and created these in the same exact way other videos have instructed. Im almost positive if I would have done these, I would have had the same exact result you did. I'm pretty sure your issue lies in the exciter itself. I would try to use the same exact one Tech Ingredients used, as he does not come off as a guy that would try to decieve his audience.
Hi, the theory comes from the late 90's / early 00's when flat panel speakers were going to be the next best thing, and we were all going to have fabulous sound quality from speakers hung on the walls! though nobody ever got a quality panel driver up and running and the theory was fundamentally flawed, and it all died really quickly. I do remember having a small panel driver that was like a paperweight that actually worked and added a bit of bass to your portable system when placed on a table., I added it to My portable Minidisc setup, The best flat panel speakers I heard were high quality Magnepan, from Canada |I believe. They were quite expensive but if You ever get a chance of picking up an old used pair, they're well worth a listen.
I built a pair of these using the 2'x4' plastic cardboard you can find in art supply stores. They actually sounded pretty good, very detailed highs and a fairly rich and full mid range, however, they had absolutely no bass. Definitely need a good sub to go with them.
Randy, the failure of your speaker build is obviously from not having used Sith Audio high-fidelity exciter tape to affix the drivers to the panels and their associated panel hanger hooks. A classic newbie mistake. Available for only $799 per panel.
This was fun! Now you've got me thinking. What would happen if you used plexiglass, really thin, with those exciters? Or maybe a really thin plank of Masonite? Or sheet aluminum? What the hell, Randy, this could be a whole series!
Try dancing around like a lunatic and then sprinkle them with a little bicarbonate of soda... makes them sound like Wharfedale Dentons, I swear it's true 🤞!
That was funny Randy! Problem was you used cheap imported crap to drive them - you should hear these on a pair of Macintosh mini blocks. and sith audio wire to hang them
This is quite a bit different from the TH-cam video I saw years ago. First the panel is not supposed to be square. Second foam was not used in the video I saw. The creator also went through a bunch of materials before he settled on his final design.
Was checking out the Demons below and have no idea how I came across a speaker called: Music Note/Grand Symphony. Sticker price about $8,000 CAN and on sale for $3,000, I believe at a high end retailer in Ottawa. Anyone ever heard if them? I sent in some questions.
If you look to the originator of this project. Techingredients, They tell you that they have no low end, and require a subwoofer. They do a pretty in depth tutorial, and tell you how to actually assemble these things. I believe what youve done is jammed a metal rod through the resonant surface, 2 of them in fact. As well as the shape and structure of the exciter, they are shaped differently for different applications. Different material. Sure theyre not really "the best speaker", but if youre going to judge a totally different platform of sound, AT LEAST BUILD IT CORRECTLY. It deserves a fair shot. DMS has a pretty good video on these as well.
I was shocked, "shocked" to discover that speaker concoction sounded terrible. Haha! Thanks for taking one for the team, Randy, with that audio project. :)
Techingredients did a way more involved video on TH-cam that seems like a way more legit build than the Tictoc video.
Exactly, also explains everything using data and with more than just his personal opinion.
If they were piano black and cost about $10k. An audio magazine would recommend them! 😅😅😅
That made me chuckle
If I recall correctly, the hifi press DID praise a bunch of NXT flat panel speakers about 25 years ago. I tried some, HATED them. 🤷♂️
At that price they would have look wood and retro. Black just looks too cheap 😁
That well. It’s true!
Randy, The funniest thing about this video was your face whenever those ‘speakers’ were playing. You didn’t need to describe the sound your face said it all! 😂
Yes, that's a very unhappy face. I loved how quickly he could identify their faults and the differences between the two panels.
🤣🤣🤣🤣🤣🤣🤣creo que es el video más divertido del año
My wife says looks don’t matter if they’re well hung. I have no idea what she means or course. Kudos for thinking outside the box.
any audio gear that the wife likes, isn't worth buying
that's what she said....
I saw the same video a few years ago and decided to make the speakers. I used the same parameters as the professor that made the video. Especially placement of the exciters. As you profess, they didn’t sound great when I made them. I used an in-line capacitor as a cheap crossover. I bought a 10 inch subwoofer from Goodwill and I hooked them up to a, The Fisher 195. They are in my garage where there is a lot of room. I still have to turn down the treble on the fisher. You can make them sound decent, but you have to put some work into them.
I have a friend who has built these speakers. He used 4 panels, 2 on each side, so the exciter placement was identical on both sides. After sanding, he also coated the panels with mix of water and PVA glue. He used epoxy to put the hooks in the foam to hang them. The panels where then painted black with a specific spray paint. He built a rack to hold the panels taut at the corners. They sound amazing. He does use a sub with them to cover the lowest frequency but the sound is detail, spacious, the highest are natural and airy.
“I got this recipe for bread, I’m gonna wing it with instructions “
Im glad someone said something.
was thinking that. if randy had not only listened to 100s of speakers but also built 100s of speakers, the results and/or setup might be quite different.
No worries, I made the best bread in the world already in 1998. Any future attempt to make the best bread would be considered disinformation.
No matter how funky the implementation, it'd take a lot to convince anyone with ears that his made the sound THAT BAD compared to absolute peak performance.
@@Avruthlelbh maybe... his attempt was not only just a bit half-hearted though. he didn't use the exciter that was spec'd, so it's kinda like building a half-assed enclosure, then ordering a random "40 watt" driver to install in it. that's not a recipe for success.
Have you watched the videos of the original creators? I think it was tech ingredients. If I'm not mistaken, the panels looked different, and they already stated you need a sub. They also superglued the exitors to the panels.
There were also 8 panels in total of various shapes and materials.
"Hot Garbage" That was the name of my garage band as a teenager! Of course it sounded crappy!
I built the ones with the acoustic ceiling tiles, and they sound ten times better than the ones with the thick foam. I'm not an audiophile, but for the price i've never had a more room-filling non-directional sound than what i get from these.
Any previous videos on these says They’re supposed to made with acoustic panels. The tictoc video mustn’t have mentioned that or I’m sure he’d have used them. Hopefully he tries them in future. I’d like to see them working with ribbon tweeters & a good sub
Even the power of social media can't change the laws of physics.
Loved your face and the delivery of your initial listening verdict! I came to your channel for a speaker review and now watch thoroughly as I love your hosting and writing. Great work!
I did similar project. I glued frame behind the board and screwed the exciter on the crossmember wich connects to sides of the frame. This took away this rattling distortion and gave little more bass.
Now with the help of equalizer they are playing backround music for the back yard on my balcony.
I did measure frequenzy responce and usable range is between 90-8k hz. Under 90hz is nothing! But over 8k it fades down somewhat smooth.
Omg, the entertainment value...
Between the sound being produced, the song selection, the look on your face as you tried to say something redeeming about the outcome and finally the look on my dog's face as i laughed until i cried. What a fun video. Thanks Randy! 😂
@cheapaudioman, It's really funny that you made this video, because building this speaker myself ultimately led me to find your channel. I was initially into headphones and decided I wanted to experiment with speakers at an affordable price. That and I was looking for a project to do with my father-in-law to build our relationship. Built them, sounded terrible, decided maybe it was the crappy amp I used. Looked for a cheap decent amp, found your review of the Aiyima amps. Bought the amp, came to the same conclusions you did on the speakers. Now I have Jamo speakers (per your review) connected to the Aiyima and am happy I went down that journey.
DMS (TH-camr) also had an interesting take on these speakers... He used a thinner foam core, but 12 of them and mounted them to completely cover a wall. He then used a ton of software to correct the missing frequencies. It looked cool and he said that it produced a unique "expansive" sound that was decent but ultimately was a lot of work to get a that sound.
No replacement for displacement. Good enclosures are the majority of the fidelity.
@@jordanrussell345 This ain't a drag race, and IB disagrees.
Wonderful and hilarious video, Randy, thanks!
Thank you so much! Really appreciate the support, my friend
Couple things,
1, ceiling tile, the kind used for absorbtion, or something similar. Plain packing type foam board isnt really gonna do much.
2. Mount them using rubber bands in the corners to hooks on the wall putting them maybe an inch away from the wall,
3. I used a 4x8 sheet for my builds
4. run dsp correction. Mine are hooked to my 4x8 for a reason
5. Sub or bassbin woofer for everything below 200hz
Ive got 4 4x8 panels hooked up around the living room with 2 6 inch woofers in 2 corners, everything sounds pretty darn good. Nothing like this demo. But yes, was a good bit of work to get it done like this.
If you actually construct these according to directions using the proper drivers, hang them PROPERLY (which will YES rule them out for most people), and supplement them with sub woofers to provide the bass, I think you would end up something that sounds much better. GIGO? When you go into a project with a defeatist attitude using subpar ingredients you end up with a subpar experience. Try building a Sony SSCS5 with "whatever you have laying around" , using whatever tools you happen to have even tho doing so you know going in would kill it, then what, you think you're gonna end up with a perfect clone of the Sony? I Don't THINK so..............
You’re right.
Tech ingredients channel did some videos on worlds best speakers 5 or 6 years ago that looked promising or at least like a fun experiment. Alot more in depth than the TikTok crap.
I'm betting he (tech ingredients) originated the design.
@@bryanmcgivney3778 I think Tech Ingredients was the one who came up with this design. I watched that video years ago. You can even see that video at 1:10 in this video. I'm pretty sure it just spread much more on Tiktok and that's where most people hear about this.
If I remember correctly, Tech Ingredients also glued some metal bars at certain locations across the back of the foam board to help with resonance or something. The few videos I saw replicating this speaker never included this step. How much this will actually help to be seen.
@@bryanmcgivney3778 That's a bet you would lose, these types of speakers have been around for years.
@@bryanmcgivney3778 yes
Yes, Tech Ingredients was the OG poster, with instructions on how to make separate bass panels too, out of ceiling tiles.
Very complete, detailed instructions.
Thanks for taking one for the team.
It’s the lack of room treatment😂
I was thinking it was the non-thousand dollar cables
"Garbage"
Probably too much toe-in.
Don't hold back, tell us how you really feel.
Thanks! I’ve been curious about these for a long time. Thanks for doing this so I don’t have to. Use this money to buy audiophile grade shish kabob skewers.
I love it. I’ll make you a pair next time I’m out there
I played around with these a couple of years ago. You need to sand off the panels until dull and apply two coats of 50/50 water and white carpenter glue.
Apply heavy duty foam weather stripping around the edges. This improves the sound.
In my dedicated listening room, they were fun, more like being at a live concert, warts and all. But they certainly aren't hi-fi by any stretch. They do scale well with high end amps which really surprised me.
I doubt if the technology could be improved even if the panels were made of some near perfect materials.
at 10:30. I'd love to switch to a normal speaker for comparison...
Thanks!
Hilarious video! Thanks man for taking one for the team. I was quite skeptical about the whole story.
Almost positive the problem is you still need crossover and need 1 exciter on a pannel to do highs and 1 on a pannel for lower end. You can try it since you already have everything you need(now half the size lol) but will end up with one speaker channel. Would be a fun test and an extra video if it came out sounding good
If he was playing it back and it sounded full-range, but was having trouble with distortion and maintain control, then this would make sense. But separating the frequencies isn't going to magically make the setup capable of playing frequencies down low.
I seem to recall the original creators said something along those lines
I built these with 5w drivers. I can say that you definitely need a 2.1 amp with eq control and a sub, also you cannot overdrive them. They are best used as ambient mid/high clarity paired with other panels or speakers. Honestly you should pair them with wood panels to capture low frequency. The foam inherently doesn’t do well with low frequency. But they are definitely a fun build to tinker with. I suggest buying a couple different Dayton audio ones and testing them on doors and cupboards. Things that have thinner wood panels so that you can understand how their frequencies differ with different placements.
In one of Lenny's recent videos he travels to a vintage store in PA and toward the end of the video the store owner shows him a pair of speakers that are remarkably similar to these in concept. Lenny was impressed.
Check it from the 15:30 mark to see the Bertagni speakers... almost the exact same thing, which leads me to believe the shape of the panel and the frame have a lot to do with the sound. Thanks for taking the time to build it Randy.
I love this. I am so glad that I didn't waste 2 days making these. Classic CheapAudioMan...
The pair I made sounded pretty good. I ran then through a subwoofer with an adjustable crossover. Gotta have a subwoofer. I never used them because I have no place to hang them.
I too was drawn back into the hifi audio world by the evil allure of the dyi panels.
Yes, the DYI foam panels are absolute crap. That said, the foam does have remarkable sound transfer properties so I decided to try a different route. First I needed an affordable yet decent and highly flexible, basic stereo system. So, based on many of your recommendations and lots of research I settled on the Fosi BT30 amp and their matching little pre-amp. (Amazing stuff) Then I added a Pyle 6 zone selector to be able to isolate and AB lots of speaker combinations. I grabbed a couple of cheap 6 inch Sony subs for $20 from the thrift store. I bought a pair of Klispch 500 rp bookshelves and I re-foamed my dad's old early 90's AT-8 Vegas. Finally I decided to try the dyi panels. The first thing I did was to not slap an actuator on a flat panel and call it done. I used my 30 or so years experience in the audio visual world and as an artist and maker to shape and construct the foam into proper speaker heads. I then placed them into a housing with soft surrounds just like an actual speaker...duh. Right out of the gate I knew I was on to something. They sounded incredibly clear and rich. My guess is that the cellular nature of the foam is a more efficient transfer medium than compressed paper. I can't speak. to the other types of cone materials used. All the needed frequencies are in those little full spectrum actuators but you have to tease them out with the proper shapes. It took about 3-4 months of prototyping and experimentation to understand what works and doesn't but I can say with some conviction that they are actually now superior to the manufactured speakers I currently have access to. For one they have far more latitude in tuning than speakers with built in crossovers or preset tunings. Being able to shape the sound to the desired texture is what I am fundamentally after and I'll never be able to afford Band and Olufsen speakers so I'm left with figuring it out myself.
Bottom line is, don't throw the baby out with the bath water. You really can dyi good speakers using stone knives and bearskins as Spock once famously said as he cobbled together a video time machine from 1930's electronics.
@@jeffsoard5056 Would love to see what the the result of these efforts was!
for the best sound you can use 2 exciters one center and the other in the ofset position for relly full range and you can increase the size of the panel to 2'X4' for even more sound.
It's hilariousness at the angry look on your face that the speakers are giving you
People should try out some medicine, was the best. 😂
It’s two weeks later and this guy is still finding purple foam dust from sanding in his dining room
I have built these out of everything from 7 dollar home store "paintings", to frame stretched resin impregnated hemp canvas, to this foam. They may be "cheap" but they take a lot of time, effort, and creativity. Slapping them together just doesn't cut it. A few points: Bigger panels= more bass= even less practical. A sub will almost always be necessary. A frame with foam suspension makes a big difference. Also, with a frame, you can have a solid brace to actually mount the exciter to. If it's kind of just flopping around back there, of course it is going to distort, and have resonance issues. Maintaing linearity of the coil is crucial. Foam panel should have paper sanded off,and surface essentially plasticized, with thinned out glue such as elmers. Corners should not be necessarily be the same radius, helps reduce standing waves. .same with sides, they should be routed. Hard edges on any surface will affect sound. If there are areas of offensive resonance, you can glue small weights to that spot to dampen. Another you tuber had decent success creating "tweeters" with funnily enough, compact discs. Others have mounted real tweeters to the frame. They can absolutely be made to have a fulfilling sound. But it takes time effort and eventually enough money to where they are no longer cheap. The best bass response I ever got was the 7$ 14x14" print. It was on a hollow plastic frame that acted like a resonant chamber of a sort. While not loudly, it played to the low 30s at a reasonable, and usable volume. It also played significantly higher than foam board as it was a thin, plastic like membrane. Subwoofer, Eq or passive crossover, tweeter that can play relatively low, and you (could) have a very full and rich midrange. A full range speaker, it is not. Audiophile, of course not... But also maybe. Fun and satisfying? Absolutely! I'll try to find, and post video of it if anyone is curious. But yeah, buy one these for 3 bucks, and turn you bedroom door in to a speaker. Or whatever else you wanna stick it to that can vibrate. Have fun, they're pretty cool.
Disappointed to not find the amazon link for the multi-tool that kept the USS Nevada running
I have always thought about installing those exciters to put behind the wall of the shower. I haven't, because that's way to much work for bad sound, but I've thought about it.
I made these. I put the exciters in the same place on both panels (not center). The separation is amazing! Yes, there is no bass. But try it after you move the center exciter to match the other. Then move them about 6 feet apart. Would you review any other pair of speakers right next to each other? Smdh
I don't have the experience with a variety of speakers like you do, but I made these according to the Tech Ingredients youtube video. There are key differences that may be impacting the sound. I think your exciters are way too big and heavy, so not letting the board vibrate. The hangers are too long, not letting it vibrate. The board appears to be 1 inch, not 3/4, not allowing it to vibrate, you see a theme? I can't say they're the best, but when paired with a woofer for the low end, they sound really good to me.
In most of the other implementations I’ve seen, the panel has been hung up against a wall. I’m wondering if that makes it sound even better?
Ive been kind of wanting to try these since seeing the og "tech ingredients" video a couple years ago. Well, i'm glad i saw this, I just deleted a bunch of the "excitors" out of my wish list on amazon. Thank you for the honest review-you definitely saved me some time and cash
You need some No-Rez and tube connectors.
Needs expensive components for the crossovers!
edit: spelling
I believe exiter placement position is the most important design consideration for these sound radiators. Also thickness and flexibility of a pannel should matter a lot.
Ha! I was listening to this video using my Fosi Audio T20 tube amplifier and a pair of Sony SS-CS5 speakers (which I love) and yeah, those makeshift speakers do not sound great, but for someone interested in tinkering around with an audio experiment, I hope they have fun with the learning process while not expecting amazing sound as a result. :)
I built these as well, put a lot of thought into building and mounting them (suspended with fishing wire etc). I did the 4 panel setup (squared edge and rounded edge pair with slightly offset exciter placement), then I wired in a subwoofer to get those frequencies below 120HZ. All that, played them and you are completely right, they are tinny, peaky hot garbage. They look cool, and I have kept them there, however I never use them and stick to my pair of Tannoys.
Thanks for sharing the truth.
The long pins you used for hanging will definitely alter the sound by making that area of the panel more rigid. I saw the original video by Tech Ingredients a few years ago. I'd hang them by using a large needle to thread either embroidery thread or fishing line thru the panel.
I made them and it takes a lot of handy work to sound decent and you have to break off the plastic top layer. Tech ingredients did a good video on the nuances.
The original video had these panels and 2 other wooden ones you had to add weights to for acoustic vibration. These are just the highs.
My father has a set of vintage speakers from the 1970's that are literally exactly this. I think they were by Toshiba or something IIRC. Walnut picture frames and an aluminum frame on the backside that also supports the magnet/motor from the backside. They actually have TWO motors/coils on each one - a large one with the coil attached to the larger part of the foam (but thinener) for bass and smaller motor/coils with the coils attached to the upper corners where the foam is thicker for tweeters. I recal them actually sounding rather good.
Would you say they sound like a hunk of foam that you glued an exciter to?
I already pretty much knew they were gonna sound exactly like you described, so yeah... Gimmick, nothing more, nothing less, LOL!
You should have used monofiliment fishing line to hang the panels for a better renonance and the larger the panels the deeper the tones. and using 2 exciters will give more and better sound. and did you sand both sides of the panels as you should have. these are all factors in the sound quality of these flat panel units.
Thanks so much for watching
I work at a cardboard packaging company, and as a fun project built these out of reboard (2 layers of paper separated by a honeycomb structure) Also stiff and lightweight. Same results all high-mid, no lower end. Paired them with a little sub, and now they sound decent enough to act as good conversation starter. ( Yep, even our speakers are made from paper ) Was able to full colour print the reboard though. That gives it a nice touch. Nice video!
I built these exactly as they did on tech ingedients - with additional 4x2 panels from ceiling tiles, and hung them just like he did, across our barn. Powered with aiyima t9, and threw in a sub. They didnt compete with any of my real speakers - but to people not into the hobby they sounded great. And the investment was maybe $100. I'd say if you want a cool project with your kids, or to have a conversation piece at your next party....definitely worth the time and cost
This.
That is exactly what I said. You have to take some time and do some experiments with it, but I found that a cheap crossover capacitor and the subwoofer made a world of difference. They are in my garage and people are amazed that the sound is coming from these panels. Fun project!
The corners should be radiused because it changes the resonance pattern(s) of the panel. The other big issue is they are 2' wide - they will be very directional above about 563Hz - which is smack in the midrange. They are dipole i.e. the sound also comes off the back of the panel; so that backwave will help somewhat? Like you say - they are open baffle speakers. So bass is cancelled out, by definition.
The shish kabob skewers will slightly affect the panel's resonances, as well.
If you have a fan blowing in the room, or you have the windows open and there is a breeze through the room - these speakers are possibly going to swing a bit?
I use 2" screws to hang the panels, works great and no glue.
Do those exciters work on glass like a window or table?
yes they do
BSR did the foam speaker thing in the 70’s/80’s. Actually sounded pretty good, but the styrofoam panels were much more complicated, and the “exciter” part was rigidly mounted to a frame at the rear. These foam panels seem way too heavy, as well. Oof.
Exciters do have their place, but not here. My sister and brother in-law were building a house and wanted to have background music in their living room for when they entertain guests. They were going to use in-wall speakers, but my sister didn't want to be able to see them.I suggested putting exciters in the attic space. We attached the exciters to the ceiling Sheetrock between the joists, one in each corner (total of 4). We connected them to a Dayton audio class D amp, and for background music, they sounded rather good. Great for Christmas music. They were thrilled with the results and the fact they don't have to look at them. It's all about the application and expectation.
I need recommendations for a vintage style set of bookshelf speakers that sound better than the Panasonics I bought for $10. They need to match the style of my zenith allegro record player.
Magged a watch once and it suuucked. Mom and Dad gave me a Milguass for grad in 94 and to this day it's my go to for high energy contracts. Love it. Those noise emitters are seriously old skool dorm noise speakers. This was great. Thanks Randy.
Meanwhile, I just got a deal on 5 Definitive Technology speakers, with onboard powered subs, AND an Onkyo 6.1 receiver, with wire, off Craigslist...
Haven't had a chance to test them yet, but any suggestions on setup/placement?
I'm doing a surround setup in a small room, so... Yeah, bass shouldn't be a problem, but I'm worried that I'll get too many overlapping waves, since the subs will be facing weird directions.
Pretty cool you served on the Nevada. Not many folks can make that claim. Thanks for your service! Did you ever make a tour into Puget Sound? I've seen her in the straits here over the years.
I always heard the 2/3 ratio thing for mounting position was the same for both speakers, except mirror images of each other. One exciter in the middle sounds wrong, but probably wouldn't make a huge difference in overall sound IMO. I made a pair once, and for mid-range voices like Sarah McLachlan, they sounded amazing and more in-person than any other speaker I'd ever heard. The bass buzzed on mine though, and they were ugly pink, so eventually they got trashed. I kept one exciter just in case mounting it to a motorcycle helmet makes for more volume / better sound than typical headphone-sized drivers used there.
Audio myth busting and experimenting. Love it!
Are those Deposition Sound FDM5 loudspeakers in the background?! ;)
"This time on Mythbusters, Randy delves into...." I can hear the theme music now.
Yeah, I tried the exciter thing way back when Partsexpress started selling them. Definitely not meant for hi-fi purposes. More for point of sale displays where it would be cool that sound is coming from no speakers... I bought a portable dayton speaker that also had an exciter as the sound source it was tolerable but it was a pocket sized speaker.
I had some of those exciters kickin' around for a project. For fun, I put one on the soundboard of my piano. Now my piano is a bluetooth speaker when I'm not playing it.
If the speaker wire is at all touching the panel, no goo. They may sound ok to some when backed by a sub.
wouldnt this be similar to open baffle speakers?
Haven't tried to use exciters with foam, but for my bedroom tv, where I didn't have room for speakers and didn't want anything visible, I used the exciters on my headboard. Sounds great, especially compared to the built in speakers of the TV.
But of course that's all based on a compromise, and probably is not nearly as good as just having an actual speaker.
I built a larger pair with rectangular foam board, 2 ft X 3 1/2 ft and used 2 exciters on each, all exciters mounted in the offset (Non-central) position. Got them hanging up in my workshop and they sound fairly reasonable to me, but only with the sub connected as well. Without the sub I'd have been snapping them up after a couple of days.
Nice little project providing you have a sub. Wouldn't have them in the house though. Great in the garage.
I have never built speakers, have nothing invested in 'em, but my observations: "The recipie" calls for the membrane to be light and somewhat stiff, you added 2pcs 8inch? long steel rods? Well, "light" part of equation is now gone, it also reinforces the membrane partly in one axis, making several of the resonant modes dampened or maybe dead all together. Maybe with these points addressed it might still be hawt garbaj.
Good tip regarding drive unit magnets. Lowther magnets are so powerful that the manufacturers recommend storing the drivers in sealed plastic bags. If you get a little magnetic detritus in the magnet gap then the driver will need dismantling to clear it out...
Saves me the time and money. Thanks! I've been exciter curious for a couple years.
Set output to 4 ohm?
DML's are design dependent, the better the design the better they will sound. The design you built is an entry level beginners design intro into DML technology.
I’ve seen the original video. I’m thinking GATORBOARD which is like very dense foamcore. There are many types of these thingys. I would have built it EXACTLY like the engineer prof in the original video. He did a lot of testing with materials etc to arrive at the final product. This type of thing is standard stuff in the world of museum displays and trade show setups that need audio. Fun video.
I made these a couple years ago. Know what they work great for? Rear, sides, and/or overhead surrounds/atmos when you have limited placement options. Also for garage speakers.
No way would I use them as Front L or R in any 2 channel or theater system.
Doesn't Honda use exciters for their Ridgeline truck-bed speakers? I wonder how they sound
I knew it wouldn't be the best speaker design or else other reputable companies would be doing it but I didn't think it would be that bad. Thanks for still being an inquisitive person and making this video!
I've played around with some of these exciters from parts express (dayton audio) and it really depends on what you attach them to. Try different materials and thickness of those materials. Cardboard can be fairly good. They have one that's mega bass exciter and those actually have some thump to them but lacks some in the highs. Any of these exciters can sound great but just depends on what you put them to.
Acoustic ceiling tiles are waaay better than the foam in my experience. Very little bass extension (needs a sub), but the clarity from the celling tiles was great. I also used the slightly better exciters.
“Blown 80’s Tv speaker”😂. My wife showed me this tik tok video, thinking she found a replacement to my big NHT 2.9s…..i am going to show this video to her. 😂
Ha, ha, ha. Love the description of "Hot garbage". Really like your channel.
Saw this speaker build project back around the time I first started following you and it seemed too good to be true. But there were a bunch of TH-cam videos on how to build these. It’s been about 2 years since I watched them, but there are tuning tips to make the sound better. One thing I recall is that you need more distance between the speakers.
Thank you Randy for this video!! I came across the tech ingredients video a couple years back and have been super curious about these. I appreciate that you took a great attention to detail and created these in the same exact way other videos have instructed. Im almost positive if I would have done these, I would have had the same exact result you did. I'm pretty sure your issue lies in the exciter itself. I would try to use the same exact one Tech Ingredients used, as he does not come off as a guy that would try to decieve his audience.
I tried making them some 3 years ago with bigger panels. Didn't work as advertised
Hey Randy, would love to see you do the ABX Open Baffle build.
Hi, the theory comes from the late 90's / early 00's when flat panel speakers were going to be the next best thing, and we were all going to have fabulous sound quality from speakers hung on the walls! though nobody ever got a quality panel driver up and running and the theory was fundamentally flawed, and it all died really quickly. I do remember having a small panel driver that was like a paperweight that actually worked and added a bit of bass to your portable system when placed on a table., I added it to My portable Minidisc setup, The best flat panel speakers I heard were high quality Magnepan, from Canada |I believe. They were quite expensive but if You ever get a chance of picking up an old used pair, they're well worth a listen.
I built a pair of these using the 2'x4' plastic cardboard you can find in art supply stores. They actually sounded pretty good, very detailed highs and a fairly rich and full mid range, however, they had absolutely no bass. Definitely need a good sub to go with them.
11:29 to 11:35 is the best thing I've ever seen on this channel.
That's not a knock, it just had me in tears laughing!
When you have an open back speaker the low end depends on the minimum diameter of the baffle. So its no surprise they don't have bass.
Randy, the failure of your speaker build is obviously from not having used Sith Audio high-fidelity exciter tape to affix the drivers to the panels and their associated panel hanger hooks. A classic newbie mistake. Available for only $799 per panel.
This was fun! Now you've got me thinking. What would happen if you used plexiglass, really thin, with those exciters? Or maybe a really thin plank of Masonite? Or sheet aluminum? What the hell, Randy, this could be a whole series!
Try dancing around like a lunatic and then sprinkle them with a little bicarbonate of soda... makes them sound like Wharfedale Dentons, I swear it's true 🤞!
That was funny Randy! Problem was you used cheap imported crap to drive them - you should hear these on a pair of Macintosh mini blocks. and sith audio wire to hang them
This is quite a bit different from the TH-cam video I saw years ago. First the panel is not supposed to be square. Second foam was not used in the video I saw. The creator also went through a bunch of materials before he settled on his final design.
There’s a few videos on TH-cam
Was checking out the Demons below and have no idea how I came across a speaker called: Music Note/Grand Symphony. Sticker price about $8,000 CAN and on sale for $3,000, I believe at a high end retailer in Ottawa. Anyone ever heard if them? I sent in some questions.
If you look to the originator of this project. Techingredients, They tell you that they have no low end, and require a subwoofer. They do a pretty in depth tutorial, and tell you how to actually assemble these things. I believe what youve done is jammed a metal rod through the resonant surface, 2 of them in fact. As well as the shape and structure of the exciter, they are shaped differently for different applications. Different material.
Sure theyre not really "the best speaker", but if youre going to judge a totally different platform of sound, AT LEAST BUILD IT CORRECTLY. It deserves a fair shot. DMS has a pretty good video on these as well.