Magic DTG Print Head Clog Cleaner with Epson Attachment
ฝัง
- เผยแพร่เมื่อ 22 มิ.ย. 2016
- Watch the video on using the Epson print head clog cleaning syringe attachment. This is a last resort type product. You can damage your print head by putting too much pressure through it, so make sure you use this when all else fails. Use this with the magic DTG clog cleaner
www.garmentprinterink.com/shop... - บันเทิง
And once I am done cleaning the printhead, does this printhead have to get dried in 24 hours, or can I just use it for printing, just right after cleaning?
And as far as 911 solution goes, it looks like you have to heat it before cleaning the printhead, but can I just use the 911 solution without heating it? because my office doesn't have any microwave or something like that...
I was trying to remove the printhead from the printer, however I am not a technician and I don't have any manual to do it, so I decided to clean it just on the printer. My dtg printer is IEHK Printer based on Epson model according to the supplier. Can you please let me know how to clean the printhead with cleaning solutions I purchase without removing it from the printer? Thanks.
Hello, thanks for the comments. By the way, what's the difference between 911 clog solution and magic DTG Print head clog cleaner? They are all same products?
Yes, just a change of name
Thanks for the tutorial. Is this for an anajet or an Epson? Your link below to removing the actual print head is for an anajet. Do you have a video showing how to remove the print head of an Epson f2000?
We are working on that. Getting an F2000 next week so we should be able to film a few different repairs.
@@TheAFactory
Please let me know when you get one for the epson f2000. Greatly needed!
Garment Printer Ink I didn't know about the shipping policy because it was my first time ordering items at Garmentprinterink.com. Is it possible for me to purchase more items in order to meet the requirement for free shipping so that the amount of $26 or something that was already paid can be waived or refunded? Thanks.
I have DTG Printer based on Epson system. In order to clean the printhead, should I remove the printhead no matter what?
removing the head does make this easier - the goal is to revive a head that has an issue. If you don't try everything you can it's going to be garbage. So taking it out gives you more control over flushing each channel.
Plz can u show us how to reach this part in the printer? How to take it out & put it back on
www.garmentprinterink.com/Anajet-Garment-Printer-Support/anajet-sprint-print-head-replacement.html
Just received my cleaning solution and followed your video instructions, I notice the solution is leaking from the sides and not the nozzles. How can I bond a nozzle plate back to inkjet printhead and if possible, what would you recommend? - Thanks!
If the fluid is coming out around the side you pushed to hard and broke the seal. We have never been able to get an epson head back together working after this happens. Sorry
@@TheAFactory Thanks for your reply, the printer is very old and I'm not upset but will know better moving forward.
I am asking you this because you have the printhead soaked in the cleaner and what I have known is that you must not touch the bottom surface of the printhead... I really would like to purchase it but I would like to know right instructions of using the cleaner.. Thanks...!
That is myth. You can touch the bottom of the print head, you don't want to dent or scratch it or rub it with something abrasive of course, but you most certainly can clean it with a lint free swab and soak it.
my printer head nozzel block what can i do this
I just purchased both products as well as other 2 items for about $100. Isn't shipping free no matter how much I purchase..?
Great - the 911 is a little stronger than the clog cleaner. Both work really good. Free shipping starts at $150 or more. Print head does not need to get dried - in fact the faster you can put it in and get ink through it the better. You can use either of the solutions heated or non heated. It just works better warm and anything does when you are cleaning ...right? thanks for you order....let me know how things go dean 631-858-0114
@@GarmentPrinterInk oh really? I didn't know about shipping policy because this was my first time ordering items at garmentprinterink.com. Is it possible for me to purchase more items in order to meet the requirement for free shipping so that the amount of $26 or something that was already paid could be waived or refunded? Thanks..! Oh, and the purchaser name was JEE HOON CHANG.
Ever seen this done with gt541
www.garmentprinterink.com/collections/printer-cleaning/products/dtg-magic-clog-cleaner-for-brother-print-heads
i have epson p 600 dtg machine. one of my white head is clogged. i tried so much but it doesnt work. can i use hot water to clean that channel?
or any other chemical which can remove clogged white ink from head?
it might not be a clog but the head failing. If you can't push any liquid through the head then yes, it's a clog that nothing will fix, however if you get some spray or waterfall, then it might be an internal issue
@@TheAFactory thanks for reply sir. actually i have tried to push transparent solution from that blocked head nozzle, it doesnt work even after i pushed it hard. Is it permanent blocked or what i am scared now.
@@seanpaul445 If you can push fluid through the head but it doesnt print, it could be a few things. Either the head itself has a board issue, head cables are dirty, bent or in some way need to be replaced or your fuse was blown on your motherboard. Hard to tell which it is without replacing the cheapest parts first - head cables...
@@TheAFactory Thanks Dean
When epson's printheads comes to this point, there are no fixes! Best way is not let ink dry inside
Ok then what?? U can't just go print. Or do head cleaning and its fine.
After you flush a print head and get a good waterfall, yes you put it right back in your printer and print with it.
@@TheAFactory that is very bad advice. U need to do an ink charge as there is now air in the line and cleaning solution lol. Smh. Come on now
Well of course..... I wasn't listing all the steps to get your machine primed up and printing. It's about cleaning the head and and seeing where it's at.
@@TheAFactory ur showing half the boob. U gotta show all if ur gonna be a stripper. U know
@@KansasItalianCity & @dean Armando Before I pulled print head out to clean/unclogged it C & M were coming through a little now nothing. What is an ink charge? I have epson f2000 what now should I do? Last time I did this had to replace mother board, print heads, and a few other parts 4k later in tech and part fees.