How to use Arduino as ISP Programmer | Arduino code upload error FIXED | What is ICSP ?
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- This video helps you to understand what is ISP and how to program Arduino using ICSP headers. Hope you guys like it
-*-*-*-*-*-*-*--*-*-*-*-*-
Code and Circuit: drive.google.c...
-*-*-*-*-*-*-*-*-*-
Arduino Tutorials🔻
• Arduino tutorials for ...
*-*-*-*-*-*-*-*-*-*-*-*
Product Links:
Arduino Uno : amzn.to/46PXbrW
ISP programmer : amzn.to/3L73CxC
*-*-*-*-*-*-*-*-*-*-*-*
Follow us on Instagram :
/ tech_at_home
Like us on Facebook :
/ tech-at-home. .
#arduinasisp #arduinotutorial #icsp #bootloader #atmega328p #arduinoprojects #techathome #gamecontroller
Thanks for watching!
*Like Share and Subscribe
Thank you so much for the clear instructions - I've been bashing my head against a wall trying to figure out how to use some ICSP headers on a PCB I'd built to flash a chip. With this instruction, I was finally able to.
Welcome!!
Thanks for this. There is a lot out there about ICSPs, but very little that is so concise and delivered in such a practical, easy to follow way.
Welcome!!♥
Very helpful. Thanks!
Welcome
"as you can see the led on our target board has started blinking" bruh it was always blinking.
so, if I have a board that isn't working properly then programmed using the ISP, can I use it independently without the programmer board?, (like doing reset to the damaged arduino)
Yes u can use independently without development board.
Hey deepak, how do we upload code to arduino with bash ide?
Great video my friend! Thank you for the detailed information. 👍😁
Welcome ❤️🙂
Can u suggest sir, how to program sdi controller with aurduino?
Can you share the board link, I have not come across it?
Help, I have an arduino board that isn't working. I'm not sure if it fried itself. What happened is that I tried to test a servo motor with a sample code on the arduino software, plug out the usb cable then plug in the 12v barrel jack, then the burnt smell came out of nowhere.
I have used 9v battery on round DC jack. It works fine.
But never connected to 12v on this connector. Check the specifications.
Actual microcontroller chip might be still fine. Only power regulator might be burnt.
Check on USB once.
can you help me program the Atmega16u2 chip please
I hope you have sent mail
Thanks
Welcome
Can I use this isp for unbrick Android using easyjtag software?
I don't have idea on this. But the Arduino behaves as standard isp programmer.
Useful content
Thank you
Thanks!
Welcome
i have a nano from china. Arduino as isp doesnt work. Getting Invalid device signature error u have any tutorial?
Sorry, I have no idea on this. While checking on internet some people say there might be issue with oscillator(target chip's clock not running)
Hello bro...I tried using arduino as ISP to blink led for 1.5 sec.
The code was uploaded to target. But the programmer arduino board is also blinking for 1.5 sec. Is it normal??
Actually the programmer board will be having ISP code.
It will have same code even if you use it for flashing the target
I have not observed the LED properly. May be it is not blinking because of blinking code.
Try to upload blink code with different delay time to the target and see.
@@techathome Thanks a lot bro. I will try
Failed chip erase upload error exit status 1
What should i do i am facing this problem when i am burning bootloader
@@E-4-elecTronic Maybe its the issue with bootloader. Try burning the bootloader from arduino IDE. It might resolve this issue I guess
Op bro
Thank you
Tell me what firmware to flash matekH743 or matekH743bdh to work dhot? is there any difference? Dshot on firmware will work matekH743?
🔥
Thanks
Icsp in sir cute 😂
ughh.. clean dat shit
👍