Very glad to hear about the tiny house opportunity! Thats a DIY subject a lot of people are interested in these days, sounds like a good secondary source of YT material!
The tiny house sounds freaking awesome! So glad that opportunity came about. You should seriously consider a series on getting and setting up the tiny houses. I didn't realize you had a "Sadie", I too have a Sadie, she was my first rescue dog
Wishing you the best with the new chapter of your lives. I have a Deka MagnaCut too. So will be keen to see your review after actual usage. I use mine to cut open packages, so really hard use 😂
I’m waiting for Gerald to drop his MagnaCut video which should be pretty soon. But I was very happy with the Mule at 61-62 HRC, it was a excellent performer in my kitchen and I didn’t baby it one bit. Hogue is saying the HRC is 61-63 so it should be solid as well, but I’m seeing lots of other manufacturers dropping theirs at 60-61 which they might as well not even bothered with using it as it’s the same old M390 bait and switch again.
On almost all knife reviews its guys very nice to see a young lady doing reviews on knifes hope you found that tiny house my wife&I live near Merritt Island wild life refuge down in edgewater florida where they used to launch space shuttle were only 15 minutes from our favorite launch for salt water flats fishing this is where the spyderco salt 5 really comes in handy keep up those good reviews
I’m wondering how hard Spyderco will run their Magnacut Native. If anyone is going to push the limits of Magnacut in a production knife it’s them (I’m hoping all the delays are signs that they are fine tuning).
CRK is doing their pocket knifes in 63-64HRC Magnacut. And plan to run fixed blades softer. Can’t wait to get my hands on one. So glad the tiny house is going to work out. My cousin owns a custom tiny home/ Van business. If you didn’t have a billion dogs I’d put you guys in contact lol
Erica, consider mobility and flexability in the housing decision you are about to make. At least have a discussion about it and how much you and Nicole value having the flexability to move across the country for new job prospects and opportunities. E.g. Tiny house on a trailer- tons of videos on the subject matter here on youtube. If mobility and flexability is not high on your list at the moment, then go with the decision that makes best sense to both of you. Sending all the best wishes your way!
Being a regrind snob, Magnacut needs to outperform LC200N at 0.008" BTE in order to make me change teams. My Spydiechef is about 0.007" BTE, and at that thickness it has never chipped or rolled, and it holds its fine edge _way_ longer than it should. It's flat out mind blowing performance for a steel at 59-ish HRC. I don't have first hand experience to back this up, but I don't believe Magnacut can be ground that thin without having edge stability issues. If anyone out there has experience with super thin BTE Magnacut, I'm all ears.
I have a DCC Pry guy in magnacut at 65hrc and ground at 7-8 thou and it's been great. The wear resistance is pretty nuts though it's not something you should get really dull (it does great touching wise on a strop or stone). When I got it the edge was dull and it was only the second knife after FF Radeon in s125v at 65hrc that I couldn't bring the edge back with stones by doing a light touch up and needed to be actually sharpened. Since then I've used either a 3 micron Gunny juice on kangaroo leather, 800 venev or a 3k ruby stone for touch ups and it stays hair widdling sharp. No issues with chipping or rolling after all sorts of use. I wanted to rest the new steel so I batoned, chopped(not great with a >3" edge and a light knife), cut wood, rope and cardboard to see how it holds up. Its has impressed me by it's wear resistance, toughness and edge stability. Though I have many knives in the 0.005-0.010 bte range and never had an issue with any of them. I think the steel and heat treatment play a bigger role than how thin the grind is(unless you pry with a tip, no steel at 0.005 will survive that). Some of the knives are Elmax PM2 Krein regrind to 0.005, Assassin's Knives custom in m398 at 64hrc and 0.007, Fantoni Dweller in 19c27 at 62hrc and 0.010, a Russian maker custom in CPR at 65hrc and 0.010, Bugout reblade in Vanax at 62hrc and 0.010, Joker slipjoint in a carbon steel and 0.005, Spyderco Air and Mantra in M4 reground to 0.007, Cultrotech Slim in Elmax at 65hrc and 0.010 are the ones I can think of the top of my head. I'd love to get a Caribbean and get in reground like your Chef( I loved the lc200n but just wasn't a fan of the Spydiechef design so I sold it). I bet it would be a hell of a slicer.
what do you think of new native 5 salt with magnacut steel? is it nicer than Lc200n version? i am waiting para 3 lightweight version magnacut release ... i wonder spyderco's magnacut feeling would be better or not compare with the deka's magnacut you said is trash
Ordered my Native salt in magnacut today with a Red fade from KnivesPlus from Kasi. The reason was because of your video. Could you tell me what deep pocket clip you use for this knife?
Have you looked at the corrosion portion of the two steels? I shark fish in the surf in the Gulf of Mexico in Florida and the Spyderco Autonomy is my tool of choice. I'm on my second one because the first one had the lock button rust but not the blade. I'm curious if anyone has done serious saltwater testing of magnacut. Nice review BTW, right to the point!
Just donated, but I had another idea: get a PO Box and let us donate knives to you. Then you can use them to create content to grow your channel and then sell the knives for money. It would almost be like a double donation.
I have a spydie chef in LC200N wich I think you would like for your job as long as you have your pocket sharpener with you also have a Spyderco mule team, Houge deka and Tactical Turn Rockwell in Magnacut and love them all but the Mule is a beast
Hello Erica 😃👋 I discovered your TH-cam channel by chance and I find you really competent and nice. Thanks for this video 🤗💚 The H-1 is known to perform better in Serrated Edge than in Plain Edge. But what about the LC200N and the Magnacut ? ▶️ The LC200N is better in Serrated or in Plain ? ▶️ And Magnacut is better in Serrated or in Plain ? Many thanks in advance for your kind answers ! 🤗💚 Have a nice day and see you soon 👊😃
I feel your pain. It would be amazing if Spyderco built a Native-shaped knife sized between the Native 5 and the Shaman. Have you tried a Manix 2 or Stretch 2? They both have about 1/2" more handle than the Native 5.
I'm only 5 seconds into this video, but Lc200n has been my favorite steel for awhile now, so I'm really looking forward to hearing you compare it to the new monster that is Magnacut. P.S. I live on the southeast coast of Florida, so stainlessness and rust proof is very important to me.
![อยู่ได้แล้ว - LIPTA feat. Mirrr [OFFICIAL MV]](http://i.ytimg.com/vi/-9-hpntNym4/mqdefault.jpg)
Very glad to hear about the tiny house opportunity! Thats a DIY subject a lot of people are interested in these days, sounds like a good secondary source of YT material!
The tiny house sounds freaking awesome! So glad that opportunity came about. You should seriously consider a series on getting and setting up the tiny houses.
I didn't realize you had a "Sadie", I too have a Sadie, she was my first rescue dog
Yeah tiny houses and travel trailers are great
Wishing you the best with the new chapter of your lives.
I have a Deka MagnaCut too. So will be keen to see your review after actual usage. I use mine to cut open packages, so really hard use 😂
I’m waiting for Gerald to drop his MagnaCut video which should be pretty soon. But I was very happy with the Mule at 61-62 HRC, it was a excellent performer in my kitchen and I didn’t baby it one bit. Hogue is saying the HRC is 61-63 so it should be solid as well, but I’m seeing lots of other manufacturers dropping theirs at 60-61 which they might as well not even bothered with using it as it’s the same old M390 bait and switch again.
I’m so happy to hear you might have a very good option for you and the dogs Erica. 💚💙🙌🎉🤞🏼
On almost all knife reviews its guys very nice to see a young lady doing reviews on knifes hope you found that tiny house my wife&I live near Merritt Island wild life refuge down in edgewater florida where they used to launch space shuttle were only 15 minutes from our favorite launch for salt water flats fishing this is where the spyderco salt 5 really comes in handy keep up those good reviews
I’m wondering how hard Spyderco will run their Magnacut Native. If anyone is going to push the limits of Magnacut in a production knife it’s them (I’m hoping all the delays are signs that they are fine tuning).
CRK is doing their pocket knifes in 63-64HRC Magnacut. And plan to run fixed blades softer. Can’t wait to get my hands on one. So glad the tiny house is going to work out. My cousin owns a custom tiny home/ Van business. If you didn’t have a billion dogs I’d put you guys in contact lol
Recently had to switch jobs and it will require a lot of processing of produce as well, so good to know!
Erica, consider mobility and flexability in the housing decision you are about to make. At least have a discussion about it and how much you and Nicole value having the flexability to move across the country for new job prospects and opportunities. E.g. Tiny house on a trailer- tons of videos on the subject matter here on youtube. If mobility and flexability is not high on your list at the moment, then go with the decision that makes best sense to both of you. Sending all the best wishes your way!
That’s very interesting, I’m so curious to see what you think of your deka in magnacut!!
I have a Spyderco Native 5 lw in Magnacut on pre-order. It will be my 1st Native 5.
@Contingency IBCT Don’t hold your breath, the magic 8 ball says several more months at least.
Being a regrind snob, Magnacut needs to outperform LC200N at 0.008" BTE in order to make me change teams. My Spydiechef is about 0.007" BTE, and at that thickness it has never chipped or rolled, and it holds its fine edge _way_ longer than it should. It's flat out mind blowing performance for a steel at 59-ish HRC. I don't have first hand experience to back this up, but I don't believe Magnacut can be ground that thin without having edge stability issues. If anyone out there has experience with super thin BTE Magnacut, I'm all ears.
I have a DCC Pry guy in magnacut at 65hrc and ground at 7-8 thou and it's been great. The wear resistance is pretty nuts though it's not something you should get really dull (it does great touching wise on a strop or stone). When I got it the edge was dull and it was only the second knife after FF Radeon in s125v at 65hrc that I couldn't bring the edge back with stones by doing a light touch up and needed to be actually sharpened. Since then I've used either a 3 micron Gunny juice on kangaroo leather, 800 venev or a 3k ruby stone for touch ups and it stays hair widdling sharp. No issues with chipping or rolling after all sorts of use. I wanted to rest the new steel so I batoned, chopped(not great with a >3" edge and a light knife), cut wood, rope and cardboard to see how it holds up. Its has impressed me by it's wear resistance, toughness and edge stability. Though I have many knives in the 0.005-0.010 bte range and never had an issue with any of them. I think the steel and heat treatment play a bigger role than how thin the grind is(unless you pry with a tip, no steel at 0.005 will survive that). Some of the knives are Elmax PM2 Krein regrind to 0.005, Assassin's Knives custom in m398 at 64hrc and 0.007, Fantoni Dweller in 19c27 at 62hrc and 0.010, a Russian maker custom in CPR at 65hrc and 0.010, Bugout reblade in Vanax at 62hrc and 0.010, Joker slipjoint in a carbon steel and 0.005, Spyderco Air and Mantra in M4 reground to 0.007, Cultrotech Slim in Elmax at 65hrc and 0.010 are the ones I can think of the top of my head.
I'd love to get a Caribbean and get in reground like your Chef( I loved the lc200n but just wasn't a fan of the Spydiechef design so I sold it). I bet it would be a hell of a slicer.
@@D00MTR33 wow, thanks for all that info! I'll have to grow a pair and buy something in magnacut so I can regrind it.
@@D00MTR33 You have a regrind air? That's so cool.
Nice congratulations on the tiny houses
I def like me some LC200N 🤜🤛
I’ll bet building out the tiny houses will make great video content and give you lots of opportunities to show your knives working hard!
It didn’t work out):
@@ericasedc oh no. I’m sorry. Dang it. Well, I know you’ll figure out the next plan.
I'll keep checking about the gofundme. Glad an opportunity seems to be opening up.
what do you think of new native 5 salt with magnacut steel? is it nicer than Lc200n version? i am waiting para 3 lightweight version magnacut release ... i wonder spyderco's magnacut feeling would be better or not compare with the deka's magnacut you said is trash
I just got a spyderco subway. It's in lc200n ,what do you think about neck knifes?
Ordered my Native salt in magnacut today with a Red fade from KnivesPlus from Kasi. The reason was because of your video. Could you tell me what deep pocket clip you use for this knife?
Have you looked at the corrosion portion of the two steels? I shark fish in the surf in the Gulf of Mexico in Florida and the Spyderco Autonomy is my tool of choice. I'm on my second one because the first one had the lock button rust but not the blade. I'm curious if anyone has done serious saltwater testing of magnacut. Nice review BTW, right to the point!
From everything I’ve seen that mangacut needs to be at least 63HRC.
Just donated, but I had another idea: get a PO Box and let us donate knives to you. Then you can use them to create content to grow your channel and then sell the knives for money. It would almost be like a double donation.
Great video! Newish sub and really enjoying the channel
Are you planning on getting Native 5 in MagnaCut to see how Spyderco's heat treat is?
Not unless I receive one from one of my “sponsors”🤣
Thinking of you all
I want to get the new Fred Perrin Subway Bowie in Lc200N by Spyderco!
I have a spydie chef in LC200N wich I think you would like for your job as long as you have your pocket sharpener with you also have a Spyderco mule team, Houge deka and Tactical Turn Rockwell in Magnacut and love them all but the Mule is a beast
Hello Erica 😃👋
I discovered your TH-cam channel by chance and I find you really competent and nice.
Thanks for this video 🤗💚
The H-1 is known to perform better in Serrated Edge than in Plain Edge.
But what about the LC200N and the Magnacut ?
▶️ The LC200N is better in Serrated or in Plain ?
▶️ And Magnacut is better in Serrated or in Plain ?
Many thanks in advance for your kind answers ! 🤗💚
Have a nice day and see you soon 👊😃
Who knows! Welcome aboard!
@@ericasedc
Dear Erica,
I count on you to test all this... 😉👍
▶️ LC200N serrated vs LC200 plain = ? -> ?
▶️ MagnaCut serrated vs MagnaCut plain = ? -> ?
▶️ LC200N serrated vs MagnaCut serrated = ? -> ?
▶️ LC200N plain vs MagnaCut plain = ? -> ?
👊😃🤗💚
Have you posted a link to the gofundme?
In the description!!!
WONDER HOW BARK RIVER JX6 II HEAT TREAT IS
What after market deep clip is that?
Lynch NW 👍🏻
Would you consider a regrind on the Native, for better slicing performance?
Nah. It’s already decent!!!
@@ericasedc Thanks Erica, hope you’re doing well. Jerad mentioned your situation on last night’s live… lots of people pulling for you!
@@FreedomFox1 oh really?! That is so nice of him! Just need lots of prayers!
The native 5 is a great knife I have one in 110v I wish the handle was 1/2 inch longer
I feel your pain. It would be amazing if Spyderco built a Native-shaped knife sized between the Native 5 and the Shaman. Have you tried a Manix 2 or Stretch 2? They both have about 1/2" more handle than the Native 5.
@@ZPositive I know I'm going to buy a manix when it is back in stock in maximet
@@sal1964 oooh, great choice! G10 or lightweight?
@@ZPositive I prefer G10
@@sal1964 nice! Tough to go wrong there.
❤️
Good news!
I'm only 5 seconds into this video, but Lc200n has been my favorite steel for awhile now, so I'm really looking forward to hearing you compare it to the new monster that is Magnacut.
P.S. I live on the southeast coast of Florida, so stainlessness and rust proof is very important to me.
Hi, have you had the chance to test spyderco's h2 steel? Would love to hear your experience.
Check out my “Steel Talk” playlist please(: I have H1 content but not H2. Hoping to get my hands on it eventually!
@@ericasedc WHAT PLANET ARE U FROM...AND HOW ARE U SO COOL?
SEMPER FI
GUNNY
@@BOOSTEDLASER oh I was born on Erica’s Planet!!!! Cheers mate!
@@ericasedc GUN TO HEAD...YOU CAN HAVE 1 KNIFE....VANAX OR MAGNACUT?
SEMPER FI
GUNNY
*WE ALL WATCH YOUR VIDS
@@BOOSTEDLASER magnacut!
Hey i looked in ur description to see ur go fund me, its blank?
There now sorry!!!
@@ericasedc Alright donated! Keep it pushing!
What up E! 🇺🇸👊🏻
If I can get it in Magnacut, I’m takin it in Magnacut. Crossed fingers it’s treated right.
Where’s the Go Fund Me link?
It’s there now sorry!!!
Magnacut allll day.
I hope the goal gets achieved! I don't have much to donate. I wish I could!
Anything helps! Seriously thank you!
@@ericasedc 🙏
The workmanship on the deca isn't good sharp edges and sharp able lock needs more work
Is MAGNACUT another name for MAXAMET.
Thank our lord Jesus Christ, good video too
Nobody talks about H1 serrated being 63-65 HRC