Can't believe as a spanner man I'm watching this, but you guys are great to watch and great at what you do, a tip I use on bearing tracks, put a weld on opposite sides, and then hit it, it usually cracks in half leaving the shaft clean, stay safe guys. 👍👍👍❤
I didn't know the Niva Urban had such a different hub setup from the early Nivas. It must be very nice to replace the front brake rotor without having to remove the whole wheel hub. I imagine this could be retrofitted but probably means switching from 22 spline axles to 24 spline?
Amigo una pregunta a un Lada Niva se le puede suspender la caja diferencial de la doble quitando todo completo con los ejes le agradezco por su respuesta
Hey guys, do you know why the bearing failed? I'm suspecting the same failure on my 2018 Niva... it has 37.000km. That's super early for a bearing to fail. Also, if it happens to be this, does the kit contain everything needed? Thanks !
Can't believe as a spanner man I'm watching this, but you guys are great to watch and great at what you do, a tip I use on bearing tracks, put a weld on opposite sides, and then hit it, it usually cracks in half leaving the shaft clean, stay safe guys. 👍👍👍❤
I didn't know the Niva Urban had such a different hub setup from the early Nivas. It must be very nice to replace the front brake rotor without having to remove the whole wheel hub. I imagine this could be retrofitted but probably means switching from 22 spline axles to 24 spline?
They switched t the 24 teeth in 2003 Year, this is one more extra switch in 2016 when you can replace brake rotor without removing the hub.
Amigo una pregunta a un Lada Niva se le puede suspender la caja diferencial de la doble quitando todo completo con los ejes le agradezco por su respuesta
What is the correct bearing preload? Is it the same as the original bearings?
Great stuff
Thanks, Tobias.
is this the same for a older lada? 2121 from 2008 thx
No
Those bearings should have fil with grease because they like to save them at the factory :(
Hello!
Is it about the same procedure for 2107?
привет из Швеции!
No, 2107 is absolutely different. We will post the video about Classic lada bearings later this year.
@@LadaPower looking forward to it! 🙂
Hey guys, do you know why the bearing failed? I'm suspecting the same failure on my 2018 Niva... it has 37.000km. That's super early for a bearing to fail.
Also, if it happens to be this, does the kit contain everything needed?
Thanks !
Hello, Donald. We don't know why this happens. The right side is no problem, already 80000 km. You need only one new bearing - bit.ly/32xXYgE
@@LadaPower cheers guys !
La niva 1600 contient 2 roulement
Почему роликовый не поставили?
я старался!)))))
Какой пробег у данного экземпляра, что у него накрылся ступичный подшипник?
40K
Hi, Do you have the address of the technician? I want to send him a set of chisels so he doesn't wreck any more tools!!!
Have you seen his torque wrench, it's on the end of an air line, 😂😂🛠👍
@@nigelgregory4777 He he.. International standard. 👍 🇬🇧
Micsoda hidraulikus prés...
ötletes kivitelezés :D
Повредили ступицу болгаркой😮