DB Killer Removal Tool (Home Made)

The equipment I purchased from my local hardware store included:
1 x metre of threaded steel (M8).
1 x metre of steel sleeve pipe to slide over the threaded steel.
2 x M8 Nuts.
1 x Large washer. Inner hole large enough to slip over an M8 bolt. Outer diameter larger than the diameter of the DB Killer but smaller than the internals of the silencer.
1 x metre long, Thick, heavy length of Steel that was cut into 6 equal pieces and welded to the steel sleeving to create the hammer section of the tool.
Welding machine and equipment required.
I can't guarantee this will work on all exhausts but it worked on mine.
Full Evolution system can be bought from us here
abikething.com...
Visibility Lighting Kit for all S series bikes available here
abikething.com...
#m1000r #m1000rr #akrapovic
-----------------------------
I use the following equipment to record and edit my VLOGs:-
Sony a6400
Iphone13 ProMax
Go Pro Hero 9 Black
Purple Panda Lavalier Microphone
Rode Wireless GO
My current motorcycles are:-
BMW M1000R (2023)
Ducati 996 (1999)
Husqvarna 250FE (2023)
Triumph Tiger 1200 Rally Explorer (2022)
BMW R1250GS Adventure TE (2021)
For any additional enquiries please send a PM, e-mail me via [e-mail] or leave a comment below.

[@Vindaloobeast]

Good effort that. Worked a treat. Being a bit ocd you could remove the old hanger loop from the right rearset if you have the tiny spacer that should have come with the bike just to tidy it up a bit.

[@SX1000ninja]

Wish I’d a thought of this before I took to using a lump hammer and chisel to my Arrow db killer…hit my thumb with said lump hammer too. The sound was worth the pain though.
Excellent idea so well done and thanks for sharing 👌🏻
The bike sounds amazing!

[@peteh9909]

A-TEAM when a plan comes together.

[@bhobho1311]

Can I do this on my akrapovic for cbr 600rr 2024?

[@housing666]

Can you please recommend how to take out DB killer from stock akrapovic exhaust on M1000R ?

[@SEMSAworks]

Did you ever manage removing?

[@stevenrichardson7320]

Great content great show big thumbs up 👍

[@LordGrievous1970]

Straight end cans and pipes are easier to get out tight DB Killers... I use a broom handle from the head/pipe end, slide the broom handle through the can, and knock the DB Killer out. Not as easy with a curved pipe or can, though.

[@ABIKETHING]

Unfortunately we couldn’t fit a broom handle through the slight bend.

[@natecote1971]

I have the factory akrapovic on my 24 s1000rr hoping i can remove the db killer it has a bolt to hold it so it must come out

[@stevenrichardson7320]

Hi
Why didn’t you try removing it when it was warmed up and everything was expanded with the. heat ?

[@ABIKETHING]

We did! Believe me we did.

[@The_DogFather]

And, if You need, can You put it back?

[@ABIKETHING]

Yes it just slots in. I had to buy the db killer separately for a track day.

[@subaruwrx3381]

Yep they weld the bolt in nowadays...

[@lg740xx]

Dremel off the welds/bolt

[@byever1]

You killed DB Cooper?

[@ABIKETHING]

?????😂