Hey Ben I pray that Tiffany does well on her college classes, I look forward to seeing the snow plow for the BX, we do not get much snow where I live in north Georgia, so please video any and all snow that you can, I love to see it
I would love to see the plasma. On my list to buy one. But I just pulled the trigger on a Case Ih farmall 55a. Thanks for sharing. Also check out surplus center online for a seat. They are the cheapest on hydro hoses also. I order from them a lot.
@khtractors right. I know what you mean. When I make too much noise when my wife is doing something. She tells me to go cut wood or go to the building lol. You're welcome
Great modification on the seat Ben. It looks like it fits you a lot better. I would love to see the CNC machine. If it’s affordable I would be interested in one. I look forward to seeing it in a future video. Thanks Ben
Ben, I noticed the air filter on my BX2380 got a lot of debris when mowing or bushhogging. 1 thing I did that helped with piece of mind was double filters. The older 2370 had 2 filters inner secondary and outer primary the 80 series left the factory with only the outer primary. Have your local dealer look up the part for the inner for a 70 series, goes right in.
I am going to try to get me a pan seat, the original one I got rid of several years back. The one that's on it now is a low cost standard spring seat with arm rest. It doesn't allow you to get on very easy because it's too close to the gear shift and I have to do an acrobatic maneuver to get in it.
They'll do anything to cut cost. I purchased a cheap seat from Northern with arm rest for My New Holland t c series compact. I' surprised how comfortable it is sitting for hours mowing.
You might try going to your JD dealership and see what they have that would fit on the seat frame work. The seats on my Deeres have the wrap around type arms and they aren’t what you would call comfortable. My Massey got a air seat with arms that flip up out of the way that are good. You might be able to take some round stock and make two arm rest and weld them to the seat. Put some type of arm padding on the round stock.
Hello Ben. I for one would like to see your CNC and see you do some stuff with it. I had one for wood when I was teaching ag a few years ago and it was amazing what you could do with that so I do understand them a little bit I know what you’re talking about for metal but that stuff is very interesting. Yes, I’d like to see it.
Thanks for another good video Ben! I'm just happy to keep watching the worst TH-camr in the world whenever a video shows up...haha. I know I'm running a couple weeks behind trying to catch up. Hope your wife did/does well on the test!
That’s Awesome Ben,I’m glad You got it and You like it, God Bless
Big help! Thanks for watching
I would love to see the CNC at work, great video Ben as always!!
Coming soon! Thank you buddy!
Hey Ben I pray that Tiffany does well on her college classes, I look forward to seeing the snow plow for the BX, we do not get much snow where I live in north Georgia, so please video any and all snow that you can, I love to see it
Certainly appreciate the prayers! She’s doing great so far. I enjoy a good snow, I’ll get all the video I can this winter. Thanks for watching
Seeing the CNC would be very interesting!
I’ll do that soon! Thanks
I would love to see the plasma. On my list to buy one. But I just pulled the trigger on a Case Ih farmall 55a. Thanks for sharing.
Also check out surplus center online for a seat. They are the cheapest on hydro hoses also. I order from them a lot.
Keep me updated on the tractor, we don’t have any new Case tractors here. Thanks for watching
You are going to have to get yourself a big woodmizer and saw some of the popular logs and use or sell it yourself
I miss our old circle mill, saw-milling was fun to do. Thanks for watching
Don't feel bad. My wife runs me outside too when she is busy on something that has to do with sounds lol. That seat looks better. Plus more leg room
I don’t know they would think we’d disturb them 😂! Thanks for watching
@khtractors right. I know what you mean. When I make too much noise when my wife is doing something. She tells me to go cut wood or go to the building lol. You're welcome
Great modification on the seat Ben. It looks like it fits you a lot better. I would love to see the CNC machine. If it’s affordable I would be interested in one. I look forward to seeing it in a future video. Thanks Ben
I’ll definitely get a video on it here soon! Thanks for watching
Ben, I noticed the air filter on my BX2380 got a lot of debris when mowing or bushhogging. 1 thing I did that helped with piece of mind was double filters. The older 2370 had 2 filters inner secondary and outer primary the 80 series left the factory with only the outer primary. Have your local dealer look up the part for the inner for a 70 series, goes right in.
Good advice! Thanks so much!
I am going to try to get me a pan seat, the original one I got rid of several years back. The one that's on it now is a low cost standard spring seat with arm rest. It doesn't allow you to get on very easy because it's too close to the gear shift and I have to do an acrobatic maneuver to get in it.
Appreciate you watching!
They'll do anything to cut cost. I purchased a cheap seat from Northern with arm rest for My New Holland t c series compact. I' surprised how comfortable it is sitting for hours mowing.
Good deal! Thanks for watching
Don't worry buddy I get tossed out of the house too lol great video buddy 👍
Glad I’m not alone! Thanks for watching
You might try going to your JD dealership and see what they have that would fit on the seat frame work. The seats on my Deeres have the wrap around type arms and they aren’t what you would call comfortable. My Massey got a air seat with arms that flip up out of the way that are good. You might be able to take some round stock and make two arm rest and weld them to the seat. Put some type of arm padding on the round stock.
@@samuelscragg7052 I bet a seat off of an open station M series John Deere would fit. They have arm rest I’m pretty sure. Thanks for watching
It is really surprising the price a person pays for these tractors and the cheapness of the build. Good save Ben.
Yeah I agree! Thanks for watching
Enjoyed the video Ben!
Thanks so much!
Hello Ben, put a nice seat from a Kubota tractor on it and send a picture to John Deere😂👍🇺🇸
Kubota has good seats! Thanks for watching
Hello Ben. I for one would like to see your CNC and see you do some stuff with it. I had one for wood when I was teaching ag a few years ago and it was amazing what you could do with that so I do understand them a little bit I know what you’re talking about for metal but that stuff is very interesting. Yes, I’d like to see it.
@@hickory40cattlecompany96 I’ll do my best to put something together soon on it. Thanks for watching
I noticed you got a rubber floor mat did you end up buying it from Deere or is it aftermarket
@@josharcher3543 it’s a Deere mat. I actually had a viewer send me this mat last year around Christmas time. I really like it. Thanks for watching
What are you doing tonight or not ❤
Not much, went to a power line fire and now just staying warm. What about you?
@khtractors are you excited for snow for Thursday and Friday
@ kinda.
@khtractors is there any way you can download Instagram or not
@khtractors are you excited for snow for Thursday and Friday
Thanks for another good video Ben! I'm just happy to keep watching the worst TH-camr in the world whenever a video shows up...haha. I know I'm running a couple weeks behind trying to catch up. Hope your wife did/does well on the test!
Appreciate you watching no matter if it’s current or not. It helps at any point!
sure I would like to see it cut some metal
I’ll try to do that soon! Thanks
You could make more money for yourself